Volume 38, Issue 1 (Journal of Advanced Materials-Spring 2019)                   jame 2019, 38(1): 23-35 | Back to browse issues page

XML Persian Abstract Print

Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Sohrabi M, Abbasi M, Ansar M M. Fabrication of Poly(ε-Caprolactone), Hydrophilic and β-Tricalcium Phosphate Layer- by -Layer Nanofibrous Scaffolds for Tissue Engineering. jame. 2019; 38 (1) :23-35
URL: http://jame.iut.ac.ir/article-1-980-en.html
1. Faculty of Engineering, Department of Textile Engineering, University of Guilan, Gilan, Iran. , m.abbasi@guilan.ac.ir
Abstract:   (6796 Views)
In this study, using biodegradable polymers, nanofiberouse scaffolds were fabricated from the layer-by-layer electrospinning method, including two layer that poly (ε-caprolactone), polyvinylpyrrolidone deposited at first layer and poly (ε-caprolactone), polyvinyl alcohol , β-tricalcium phosphate at latter. After prepration of scaffolds, scanning electron microscopy (SEM), swelling, porosity, mechanical properties and biodegradability behavior in buffered saline phosphate solution were  studied. The results confirmed the bioactivity  and suitable mechanical properties of the layer-by-layer scaffold. The swelling increase with the addition of hydrophilic polymers and reache 811 ± 214 % in the layer-by-layer scaffold, which reveald a significant difference compared to pure PCL. The MTT test on the layer-by-layer scaffold, after 3, 5 and 7 days of rats bone marrow stem cells (rMSC) culture, showed the cell viability of above 80% moreover, cells morphology on the scafold indicated the optimal compatibility of  cells on the scaffold.
Full-Text [PDF 1311 kb]   (1756 Downloads)    
Type of Study: Research | Subject: Polymer materials
Received: 2018/07/3 | Accepted: 2018/12/16 | Published: 2019/06/15

Add your comments about this article : Your username or Email:

Send email to the article author

Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

© 2022 CC BY-NC 4.0 | Journal of Advanced Materials in Engineering (Esteghlal)

Designed & Developed by : Yektaweb