Volume 34, Number 4 (Journal of Advanced Materials-winter 2016)                   jame 2016, 34(4): 9-18 | Back to browse issues page



DOI: 10.18869/acadpub.jame.34.4.9

XML Persian Abstract Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Khajelakzay M, Bakhshi S R, Borhani G. Synthesis of Silicon Nitride by Mechanical Alloying and Heat Treatment. jame. 2016; 34 (4) :9-18
URL: http://jame.iut.ac.ir/article-1-746-en.html

Department of Materials Engineering, Malek Ashtar University of Technology, Shahin Shahr, Iran
Abstract:   (2181 Views)

In this study, synthesis of silicon nitride by mechanical alloying and the effects of important parameters of milling time and heat treatment temperature, time and rate are presented. Silicon micro powder and nitrogen gas were used as precursor materials. Synthesized phases, morphology and particle size were investigated by X-ray diffraction pattern (XRD) and Field emission scanning electron microscopy (FE-SEM), respectively. X-ray fluorescence analysis (XRF) was used for silicon nitride purity investigation.The optimum sample was produced at 30 h milling time, heat treatment at 1300 and 22 /min heating rate conditions. X-ray fluorescence analysis showed more than 98% purity.

Full-Text [PDF 3074 kb]   (652 Downloads)    
Type of Study: Research | Subject: General
Received: 2016/03/5 | Accepted: 2016/03/5 | Published: 2016/03/5

Add your comments about this article : Your username or email:
Write the security code in the box

Send email to the article author


© 2015 All Rights Reserved | Journal of Advanced Materials in Engineering (Esteghlal)

Designed & Developed by : Yektaweb

تحت نظارت وف بومی آسپا-وف