Volume 35, Number 1 (Journal of Advanced Materials-Spring 2016)                   jame 2016, 35(1): 23-33 | Back to browse issues page



DOI: 10.18869/acadpub.jame.35.1.23

XML Persian Abstract Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Abdolahi A, Saeri M R, Tirgir F, Doostmohammadi A, Sharifi H. Preparation and characterization of the sol–gel nano-bioactive glasses modified by the coupling agent 3-(Trimethoxysilyl) Propyl methacrylate . jame. 2016; 35 (1) :23-33
URL: http://jame.iut.ac.ir/article-1-783-en.html

1- Department of Materials Engineering, Faculty of Engineering, Shahrekord University, Shahrekord, Iran
Abstract:   (1711 Views)

In this study, NBG was successfully achieved through a sol-gel technique, and to further improve its dispersibility, a crylate coupling agent was coupled onto the surface of the NBG. The 3-(Trimethoxysilyl)Propylmethacrylate coupling agent was used to the surface modification of the synthesized NBG by a wet-chemical method in a dynamic inert nitrogen atmosphere. The surface properties of the biomaterials before and after modification were characterized and compared using FTIR and AFM techniques. The characteristic peaks in FTIR spectra indicated that –CH2, –CH3 and C=O groups appeared on the surface of modified NBG, and also, AFM analysis revealed that the dispersibility of surface modified NBG was improved, significantly. The above results proved that the desired groups of 3-(Trimethoxysilyl)Propyl methacrylate had been covalently bonded onto the surface of NBG. Besides, a nanocomposite scaffold was synthesized using the synthesized NBG and polyurethane foam as raw materials. The morphology of pores, porosity contents, compress strength and bioactivity of the scaffold were studied. The results showed that the biological scaffolds for use in bone tissue engineering with the basic requirements (90% porosity and 200-600 μm pore diameter) were successfully prepared. The polymer component had no effect on the relationship between the scaffold pores and bioactivity of bioglass nanoparticles. Improvement of compressive strength and proper bioactivity of the resulted scaffold showed that it is an acceptable candidate for biomaterials applications.

Full-Text [PDF 1026 kb]   (553 Downloads)    
Type of Study: Research | Subject: General
Received: 2016/06/13 | Accepted: 2016/06/13 | Published: 2016/06/13

Add your comments about this article : Your username or email:
Write the security code in the box

Send email to the article author


© 2015 All Rights Reserved | Journal of Advanced Materials in Engineering (Esteghlal)

Designed & Developed by : Yektaweb