Volume 35, Number 1 (Journal of Advanced Materials-Spring 2016)                   jame 2016, 35(1): 47-55 | Back to browse issues page



DOI: 10.18869/acadpub.jame.35.1.47

XML Persian Abstract Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Deljavan S, Kakroudi M G, Zaroodi J, Rezaei F. Investigation of Tantalum Cation Doped Ba (Co0.8Fe0.2) O3−δ Perovskite Phase. jame. 2016; 35 (1) :47-55
URL: http://jame.iut.ac.ir/article-1-785-en.html

1- Materials Engineering Department, Faculty of Mechanical Engineering, University of Tabriz, Tabriz, Iran
Abstract:   (1129 Views)

Perovskite structures including oxygen vacancies are the most important group of the oxygen preamble membranes. These membranes have potentially attractive applications in the membrane reactors for partial oxidation of methane. Doping Perovskite phase in order to increase the oxygen vacancies and oxygen permeation, besides Perovskite structure stability, has been the main approach of the recent researches. In this research, tantalum was chosen as the appropriate dopant for Ba(Co0.8Fe0.2)O3−δ  Perovskite phase, according to the tolerance factor calculations. The X ray patterns of synthesized Ba (Co0.7Fe0.2Ta0.1)O3−δ indicate that the Perovskite structure was formed. Powder density, thermal expansion coefficient measurements and bond strength studies using FT-IR analysis revealed that the chosen dopant not only increases the oxygen vacancies volume but also reduces the thermal expansion coefficient without significant changes of bond strength. Results showed that the novel Ba (Co0.7Fe0.2Ta0.1) O3−δ is a good choice for the membrane fabrication of methane partial reduction reactors.

Full-Text [PDF 689 kb]   (313 Downloads)    
Type of Study: Research | Subject: General
Received: 2016/06/14 | Accepted: 2016/06/14 | Published: 2016/06/14

Add your comments about this article : Your username or email:
Write the security code in the box

Send email to the article author


© 2015 All Rights Reserved | Journal of Advanced Materials in Engineering (Esteghlal)

Designed & Developed by : Yektaweb