Volume 35, Number 1 (Journal of Advanced Materials-Spring 2016)                   jame 2016, 35(1): 57-69 | Back to browse issues page



DOI: 10.18869/acadpub.jame.35.1.57

XML Persian Abstract Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Shamsi M, Nezafati N, Zavareh S, Zamanian A. Synthesis and Characterization of Silicate Calcium Phosphate Bioactive Glass Prepared by Electrospinning Method . jame. 2016; 35 (1) :57-69
URL: http://jame.iut.ac.ir/article-1-786-en.html

2-Department of Nanotechnology and Advanced Materials, Materials and Energy Research Center, Karaj, Alborz, Iran
Abstract:   (1657 Views)

Ternary (%mol) (64SiO2-31CaO-5P2O5) system of sol-gel derived bioactive glass fibers was prepared by electrospinning method. X-ray Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and nitrogen adsorption test (BET) analyses were performed to investigate the phase and chemical group of the composition, morphology of the surface and specific surface area of the fibers, respectively. SEM observations confirmed that the fibers were nano size. The amorphous nature and the presence of silanol groups in the composition were confirmed by XRD and FTIR, respectively. Apatite formation and biodegradability of the fibers were studied using various analyses after different days of soaking in simulated body fluid (SBF). The results affirmed the presence of apatite layers on the surface of the fibers. Cell culture evaluation indicated that MG-64 human osteoblast-like cells were attached and spread well on the surface. Furthermore, cell viability and cell growth demonstrated that the cells were grown and reproduced well on the fibers.

Full-Text [PDF 2198 kb]   (438 Downloads)    
Type of Study: Research | Subject: General
Received: 2016/06/14 | Accepted: 2016/06/14 | Published: 2016/06/14

Add your comments about this article : Your username or email:
Write the security code in the box

Send email to the article author


© 2015 All Rights Reserved | Journal of Advanced Materials in Engineering (Esteghlal)

Designed & Developed by : Yektaweb

تحت نظارت وف بومی آسپا-وف