Volume 35, Number 3 (Journal of Advanced Materials-Fall 2016)                   jame 2016, 35(3): 1-12 | Back to browse issues page



DOI: 10.18869/acadpub.jame.35.3.1

XML Persian Abstract Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Bahrami M, Borhani G, Bakhshi S, Ghasemi A. Synthesis and Characterization of Hybrid Silica-Zirconia Coatings with Cerium Inhibitor on Aluminum 6061. jame. 2016; 35 (3) :1-12
URL: http://jame.iut.ac.ir/article-1-852-en.html

Department of Materials Engineering, Malek Ashtar University of Technology, Shahin Shahr, Isfahan
Abstract:   (1624 Views)

Organic–inorganic hybrid coatings were prepared by sol–gel method and deposited on aluminum alloy 6061. Attenuated Total Reflectance-Fourier Transform Infrared (ATR-FTIR) spectroscopy and Scanning Electron Microscopy (SEM) were used for structural study of the hybrid coatings. Adhesive strength of sol–gel coatings to the substrate was evaluated quantitatively and qualitatively. Corrosion behavior of the samples was studied by cyclic potentiodynamic and linear polarization tests. Results showed that adhesion strength of the coatings to the substrates was increased with increasing tetrapropoxide of zirconium (TPOZ) and cerium content. Corrosion tests showed that corrosion current density of coated samples were decreased three to seven orders of magnitude in comparison with uncoated aluminum alloy 6061. Decreasing in corrosion current density and increasing in polarization resistance was observed by increasing zirconia and cerium content. Unlike the uncoated aluminum alloy 6061, the crack-free coatings did not show pitting tendency. 

Full-Text [PDF 741 kb]   (400 Downloads)    
Type of Study: Research | Subject: General
Received: 2016/12/20 | Accepted: 2016/12/20 | Published: 2016/12/20

Add your comments about this article : Your username or email:
Write the security code in the box

Send email to the article author


© 2015 All Rights Reserved | Journal of Advanced Materials in Engineering (Esteghlal)

Designed & Developed by : Yektaweb

تحت نظارت وف بومی آسپا-وف