Site Tops

:: Most Visited Articles
Effect of Cellular Structure of A356-10 vol.%SiC Composite Aluminum Foam on Progressive Quasi-Static Axial Buckling Behavior of Brass Crush-Box (17251 Views)
Density Functional Theory Calculation on Improving the Photocatalytic Properties of Zinc Oxide and Cadmium Sulfide by Hybridization with Metal-Organic Framework (14561 Views)
Determination of Tafel Constants from Polarization Curves and Calculation of Steel Corrosion in High Electrical Resistivity Media such as Concrete (14437 Views)
A Comparative Study of the Addition Effect of Diopside and Silica Sulfuric Acid Nanoparticles on Mechanical Properties of Glass Ionomer Cements (14090 Views)
Grain Growth Kinetics of Magnesium Alloys Containing Aluminum and Rare-Earth Element Gadolinium (13928 Views)
Investigation of the Mechanical Properties of AISI 316 Austenitic Stainless Steel and St 37 Low Carbon Steel Dissimilar Joint by Friction Stir Welding (13573 Views)
Preparation and Characterization of Polycaprolactone / Layered Double Hydroxide Nanocomposite for Hard Tissue Engineering Applications (13344 Views)
Investigating the Effect of Microstructure on Oxidation Behavior of Ti47Al48Mn5 Alloy Synthesized by Mechanical Alloying (13217 Views)
Comparison of Super-Hydrophobicity and Corrosion Resistance of Micro-Nano Structured Nickel and Nickel- Cobalt Alloy Coatings on Copper Substrate (12663 Views)
Evaluation of Ability of Hydrogen Absorption in SAB-16/Pd Nanostructure Composite (12597 Views)
Synthesis of MoSi2-TiB2 Nanocomposite by Mechanical Alloying through Two Methods and Comparison of Their Properties for Use in Thermal Spraying Process (12518 Views)
Investigating the Effect of Co-Cr-Sn Ions Substitution on Microstructure and Magnetic Properties of M-type Barium Hexaferrites (12423 Views)
Fabrication of Chitosan/Poly (vinyl alcohol)/Carbon Nanotube/Bioactive Glass Nanocomposite Scaffolds for Neural Tissue Engineering (12344 Views)
Evaluation and Comparison of the Effects of RRA, T73 and T6 Heat Treatments on Hardness, Tensile and Bending Strengths of 7075 Aluminum Alloy (12059 Views)
Study on the Effect of Annealing Process on Microstructure and Electrochemical Behavior of the Binary Mn-Ni Nano-Oxide Pseudocapacitor Synthesized by Anodic Deposition (11708 Views)
Preparation, Characterization and Comparative Study of Antibacterial Properties of Ag-TiO2 and ZnO-TiO2 Nanoparticles (11704 Views)
The Comparison of Microstructure and Mechanical Properties of Diffusion Joints of 5754, 6061, and 7039 Aluminum Alloys to AZ31 Magnesium Alloy (11644 Views)
Preparation and characterization of the sol–gel nano-bioactive glasses modified by the coupling agent 3-(Trimethoxysilyl) Propyl methacrylate (11606 Views)
Optimizing Properties of Aluminum-Based Nanocomposites by Genetic Algorithm Method (11538 Views)
Effect of Structure and Surface Roughness on Wetting Angle of a Hypoeutectic Cast Iron (11470 Views)
Space Vector Modulation Based on Classification Method in Three-Phase Multi-Level Voltage Source Inverters (11421 Views)
Fabrication of Mullite-Alumina-SiC Composites by In-Situ Reaction during Carbothermal Reduction of Inorganic Materials (11412 Views)
Characterization of Nanonanocrystalline Mg-6Al-1Zn-1Si Alloy Powder During Mechanical Alloying and Subsequent Annealing (11360 Views)
Investigating Formation of Intermetallics in Compound Casting of Al/Cu Bimetals (11200 Views)
Evaluation of Properties of Crofer Stainless Steel Produced by Mechanical Alloying for Using as Interconnect Plates of Solid Oxide Fuel Cells (10987 Views)
Study of Nano-Titania Addition on Mechanical Strength of Mullite-Bonded Alumina-Silicon Carbide Nano-Composites (10970 Views)
An Investigation of the Effects of Cold Rolling and Annealing on the Corrosion and Tensile Behaviors of Al/Steel Multilayer Composite (10867 Views)
Electrodeposition and Characterization of Nanocrystalline Nickel- Molybdenum Alloy (10841 Views)
Effect of Excess Al in TiO2-Al Powder Mixture and Susceptor Material on Microwave Synthesis of TiAl/Al2O3 Composite (10812 Views)
Synthesis and Characterization of Hybrid Silica-Zirconia Coatings with Cerium Inhibitor on Aluminum 6061 (10770 Views)
Simulation of Elastic Properties of Polymer- Clay Nanocomposite (10766 Views)
Electroplating of Ni-Mo Coating on Stainless Steel for Application in Proton Exchange Membrane Fuel Cell Bipolar Plate (10760 Views)
Synthesis and Characterization of Silicate Calcium Phosphate Bioactive Glass Prepared by Electrospinning Method (10683 Views)
Optimization of Surface Mechanical Properties and Characterization of AZ31B/CNT Nano-composite through Friction Stir Processing (FSP) using Response Surface Methodology (RSM) Design of Experiment (10640 Views)
Fabrication and Characterization of Pyrolyzed Phenolic/Carbon Nanocomposite Reinforced by Metal Oxide Nanoparticles (10561 Views)
Effect of Grain Size on the Corrosion Behavior of 304L Stainless Steel (10553 Views)
In-situ Preparation of Hydroxyapatite-Carbon Nanotubes Nanocomposite and Investigation of its Microstructure and Morphology (10515 Views)
Characterization of Al-CNT Composite Nanoparticles Synthesized by Electrical Explosion of Wire in Acetone (10510 Views)
Synthesis of Silicon Nitride by Mechanical Alloying and Heat Treatment (10436 Views)
Investigation of Photocatalytic Properties of NiO/TiO2 Layers Grown via PEO/EPD Method (10367 Views)
Effect of Grain Size Reduction by Sodium Molybdate on Mechanical Properties of Al-0.7Fe Alloy (10339 Views)
Thermal, mechanical and carbonization behavior of high temperature phenolic polymer (10239 Views)
Investigation of Reaction Mechanism, Structure and Mechanical Properties of the In-situ Composites Fabricated in Al-V2O5-NiO System (10221 Views)
Synthesis and Evaluation of Mechanical Properties of Hydroxyapatite/ Sol-gel Derived Bioactive Glass Particles Composites (10170 Views)
Effect of Mg, Co and Ti Cations on Magnetic and Microwave Properties of SrFe12O19 Nanoparticles (10140 Views)
Elimination of Mn3Ga with Low Crystal Symmetry in Alloying Mn-Ga by Ge Addition (10130 Views)
Preparation, characterization and evaluation of mechanical and biological characteristics of hybrid apatite/ gelatin- chitosan nanocomposite bone scaffold via biomimetic method (10092 Views)
Synthesizing CoFe2O4 by Glass-Ceramic Method and Characterizing its Magnetic Properties in Na2O-Fe2O3-CoO-B2O3-SiO2 System (10064 Views)
Effects of Melt/Solid Volume Ratio and Rotational Speed on the Interface of Al/Mg Bimetal in Centrifugal Casting (10063 Views)
Effect of Al-5Ti-B Inoculant Addition on the Graded Microstructure of Centrifugally Cast Al-13.8 wt.% Mg2Si Composite (10038 Views)
Total Sum: 4795472

© 2022 CC BY-NC 4.0 | Journal of Advanced Materials in Engineering (Esteghlal)

Designed & Developed by : Yektaweb