@article { author = {F. Farhat-Nia and M. Salimi,}, title = {Application of Modified Slab Method in Asymmetrical Plate Rolling}, journal = {Journal of Advanced Materials in Engineering (Esteghlal)}, volume = {24}, number = {2}, pages = {137-158}, year = {2022}, publisher = {Isfahan University of Technology}, issn = {2251-600X}, eissn = {2423-5733}, doi = {}, abstract = {In this paper, an analytical method based on Modified Slab Method of analysis is presented to study the asymmetrical rolling process due to difference in work rolls radii, rolls speeds and interface frictions. The shear force imposed on material along the contact region is considered to be a function of the frictional factor and the roll gap geometry. Elastic-plastic with linear work hardening constitutive law was assumed. Asymmetric factors considered are roll diameter ratio, roll speed mismatch and differential interface friction conditions. Neutral points’ location along the contact region in relation to the &#10variations on thickness reduction, roll speed ratios, roll diameters ratio and front and back tensions are investigated. Predicted values for rolling force and torque from the present analytical model are compared with those of other workers, which are shown to be in good agreement&#10}, keywords = {Asymmetrical rolling,Slab method,Friction factor,Plane strain conditions}, title_fa = {استفاده از روش قاچی اصلاح شده در نورد نامتقارن ورق}, abstract_fa = {در این مقاله، یک روش تحلیلی بر اساس روش قاچی اصلاح شده ارائه شده تا فرایند نورد نامتقارن به دلیل وجود اختلاف در شعاع غلتکهای کاری، سرعت غلتکها و اصطکاک بین سطوح مورد مطالعه قرار گیرد.&#10 تنش برشی اعمال شده بر ماده در طول تماس تابعی از ضریب اصطکاک و شرایط هندسی در شکاف غلتکها در نظر گرفته شده است. معادله متشکله الاستو- پلاستیک با سخت شوندگی خطی فرض شده است. فاکتورهای عدم تقارن در نظر گرفته شده عبارت‌اند از نسبت قطر غلتکها، عدم انطباق سرعت غلتکها و تفاوت در شرایط اصطکاک بین سطوح. جابه جایی نقاط خنثی در طول تماس ورق با غلتکها نسبت به تغییرات درصد کاهش ضخامت ورق، نسبت سرعتها، شعاعها و تنشهای کششی در ورود و خروج ورق بررسی شده است. مقادیر پیش بینی شده برای نیرو و گشتاور توسط مدل حاضر با مقادیر دیگر محققان مقایسه شده است که موافقت خوبی بین این نتایج مشاهده می‌شود.&#10}, keywords_fa = {نورد نامتقارن,روش قاچی,ضریب اصطکاک,شرایط کرنش صفحه‌ای}, url = {https://jame.iut.ac.ir/article_2129.html}, eprint = {https://jame.iut.ac.ir/article_2129_f7abfadb505a124edd03794769313615.pdf} }