@article { author = {S. R. Bakhshi, and M. Salehi, and H. Edris, and G. H. Borhani,}, title = {Isothermal oxidation behavior of plasma-sprayed Mo-Si-B intermetallic coatings on plain steel}, journal = {Journal of Advanced Materials in Engineering (Esteghlal)}, volume = {29}, number = {1}, pages = {21-30}, year = {2022}, publisher = {Isfahan University of Technology}, issn = {2251-600X}, eissn = {2423-5733}, doi = {}, abstract = {In this study, Mo-14Si-10B and Mo-57Si-10B (at%) elemental powders were separately milled using an attritor mill. Mechanically alloyed powders were agglomerated and annealed. Then, powders of Mo-Si-B as alloyed (with composites) and agglomerated (without composites) were plasma sprayed onto plain carbon steels. The samples, both coated and non-coated, were subjected to isothermal oxidation tests. Metallurgical characteristics of powders and coatings were evaluated by SEM and XRD. Plasma-sprayed Mo-Si-B coatings (with phases of MoSi2, Mo5Si3, MoB and Mo5SiB2) greatly improved the oxidation resistance of the plain steel substrates, but plasma-sprayed Mo-Si-B coatings (without any phases) did not significantly improve the oxidation rate of substrates. Also, the kinetics and composition of the oxide-scale have been found to depend on the alloy composition.}, keywords = {mechanical alloying,Thermal spraying,High temperature oxidation,Molybdenum silicides,Mo-Si-B}, title_fa = {ارزیابی مقاومت به اکسایش پیوسته پوشش پاشش حرارتی Mo-Si-B روی فولاد ساده کربنی}, abstract_fa = {در این تحقیق، ترکیب پودری 76Mo-14Si-10B و 33Mo-57Si-10B (برحسب درصد اتمی) به کمک آسیاب سایشی آلیاژسازی مکانیکی شدند. به منظور تشکیل ترکیبات بین‌فلزی، پودرهای به‌دست آمده عملیات حرارتی شدند و پودرهای به‌دست آمده همراه با پودرهای بدون ترکیب بین‌فلزی، پس از آگلومراسیون، به کمک روش پلاسمایی روی زیرلایه‌هایی از فولاد ساده کربنی پاشش حرارتی شدند. نمونه‌های فولادی در شرایط بدون پوشش و همراه با پوشش، تحت فرایند اکسایش پیوسته قرار گرفته و همزمان تغییرات وزن آنها ثبت شد. خصوصیات فازی و ساختاری پودرها، پوشش و لایه اکسیدی به کمک میکروسکوپ الکترونی روبشی و پراش پرتو ایکس تجزیه و تحلیل شدند. نتایج حاصله نشان داد که با اعمال پوشش Mo-Si-B حاوی ترکیبات MoSi2، Mo5Si3، MoB و ترکیب مهم Mo5SiB2، نرخ اکسایش فولاد به طور قابل توجهی کاهش یافته و با توجه به نتایج پراش پرتو ایکس پوشش، ترکیبات اعمالی روی فولاد، تفاوت خاصی را قبل و بعد از فرایند اکسایش از خود نشان نمی‌دهند. ضمن آن‌که پوشش Mo-Si-B فاقد ترکیبات بین‌فلزی فوق، تأثیر قابل توجهی بر فرایند اکسایش ندارد.}, keywords_fa = {آلیاژسازی مکانیکی,پاشش حرارتی,اکسایش در دمای بالا,سیلیسایدهای مولیبدن,Mo-Si-B}, url = {https://jame.iut.ac.ir/article_2235.html}, eprint = {https://jame.iut.ac.ir/article_2235_35ab79cacc68ee7f92769edd16ae50c4.pdf} }