@article { author = {A. M. Molavi, and S. M. Mirkazemi, and A. Beitollahi,}, title = {The Effects of Heat Treatment and Atmosphere on Magnetic Properties of Nano-Structured Nickel Ferrite Glass-Ceramic}, journal = {Journal of Advanced Materials in Engineering (Esteghlal)}, volume = {32}, number = {1}, pages = {91-99}, year = {2022}, publisher = {Isfahan University of Technology}, issn = {2251-600X}, eissn = {2423-5733}, doi = {}, abstract = {The effects of temperature, time and atmosphere on microstructure and magnetic properties of NiFe2O4 glassceramic were investigated utilizing differential thermal analysis, X-ray diffraction, vibrating sample magnetometer and scanning electron microscope techniques. Various compositions were studied in the Na2O-NiO-Fe2O3-B2O3-SiO2 system to obtain amorphous phase. The sample heat-treated in graphite bed at 510°C for 1 hr showed higher magnetization than the one heattreated in the air under the same condition. XRD analysis showed the presence of nickel ferrite and some non-magnetic phases such as sodium borate and silicate phases in the heat treated samples. The maximum magnetization of samples reduced by increasing the holding time from 1hr to 3 hr at 510°C. Increment of temperature to 700°C increased the amount of NiFe2O4 and maximum magnetization.}, keywords = {Nickel ferrite,Glass-ceramic,nanostructure,magnetic properties}, title_fa = {تأثیر عملیات حرارتی و اتمسفر بر خواص مغناطیسی شیشه سرامیک فریت نیکل نانوساختار}, abstract_fa = {در پژوهش حاضر اثر دما، زمان و اتمسفر بر ریزساختار و خواص مغناطیسی فریت نیکل تهیه شده به روش شیشه سرامیک توسط تکنیک های تحلیل حرارتی افتراقی، پراش اشعه X (XRD)، مغناطومتری نمونه مرتعش و میکروسکوپ الکترونی روبشی مورد مطالعه قرار گرفت. ترکیبات مختلف در سیستم SiO2- B2O3- Fe2O3- NiO- Na2O برای دست یابی به شیشه آمرف بررسی گردید. نمونه ی عملیات حرارتی شده در بستر گرافیتی در دمای 0C510 به مدت یک ساعت، آهنربایش بیشتری نسبت به نمونه-ی عملیات حرارتی شده در اتمسفر هوا و در شرایط یکسان نشان داد. حضورفاز فریت نیکل و فازهای غیرمغناطیسی از قبیل فازهای سدیم بوراتی و سیلیکاتی در تحلیلXRD نمونه های عملیات حرارتی شده مشاهده شد. آهنربایش نمونه ها با افزایش زمان نگه داری در دمای 0C510 از 1 ساعت به 3 ساعت کاهش یافت. افزایش دما تا 0C700 باعث افزایش تبلور فاز فریت نیکل و افزایش میزان آهنربایش شد.}, keywords_fa = {فریت نیکل,شیشه سرامیک,نانوساختار,خواص مغناطیسی}, url = {https://jame.iut.ac.ir/article_2280.html}, eprint = {https://jame.iut.ac.ir/article_2280_6a0eccd07aba88bcf0b9988e4d70f18a.pdf} }