@article { author = {Jafarian, M. and Paidar, M. and Jafarian, M.}, title = {The Comparison of Microstructure and Mechanical Properties of Diffusion Joints of 5754, 6061, and 7039 Aluminum Alloys to AZ31 Magnesium Alloy}, journal = {Journal of Advanced Materials in Engineering (Esteghlal)}, volume = {35}, number = {1}, pages = {11-21}, year = {2022}, publisher = {Isfahan University of Technology}, issn = {2251-600X}, eissn = {2423-5733}, doi = {10.18869/acadpub.jame.35.1.11}, abstract = {In this study, microstructure and mechanical properties of diffusion joints between 5754, 6061 and 7039 aluminum alloys and AZ31 magnesium alloy were investigated. Diffusion joints were done between the alloys at 440 °C, for duration of 60minutes, at 29 MPa pressure and under 1×10-4 torr vacuum. The interface of joints was studied using optical (OM) and scanning electron microscopy (SEM) equipped with EDS analysis and the line scan. According to the results of EDS analysis, the presence of intermetallic compounds including Al12Mg17, Al3Mg2 and their mixture was observed at the diffusion zone. Also, according to the results of the line scan, the hardness value of aluminum alloys has a considerable effect on diffusion of the magnesium atoms toward aluminum alloy and the greatest diffusion of magnesium was observed when 6061 aluminum alloy was used. More diffusion resulted in a stronger bond between atoms of magnesium and aluminum, and maximum strength of approximately 42 MPa was obtained when 6061 aluminum alloy was used.}, keywords = {Aluminum alloys,AZ31 Magnesium,Diffusion bonding,mechanical properties,microstructure}, title_fa = {مقایسه خواص ریزساختاری و مکانیکی اتصالات نفوذی آلیاژهای5754، 6061 و 7039 آلومینیـوم به آلیاژ AZ31 منیـزیم}, abstract_fa = {در این پژوهش، خواص ریزساختاری و مکانیکی اتصالات نفوذی آلیاژهای 5754، 6061 و 7039 آلومینیوم به آلیاژ AZ31 منیزیم بررسی شد. اتصالات نفوذی بین آلیاژهای مورد نظر در دمای 44 درجه سانتی‌گراد، زمان 60 دقیقه، فشار 29 مگاپاسکال و خلاء 4-10×1 تور صورت گرفتند. فصل مشترک اتصالات با استفاده از میکروسکوپ‌های نوری و الکترونی روبشی مجهز به تحلیلگر نقطه‌ای و خطی بررسی شدند. طبق نتایج تحلیل نقطه‌ای حضور ترکیبات بین‌فلزی Al12Mg17 و Al3Mg2 و مخلوطی از این دو فاز در ناحیه نفوذ مربوط به تمامی اتصالات انجام شده، مشاهده شد. هم‌چنین طبق نتایج تحلیل خطی، مقدار سختی آلیاژ آلومینیوم تأثیر به‌سزایی در نفوذ هر چه بیش‌تر اتم‌های منیزیم به­ سمت آلیاژ آلومینیوم داشت و بیشترین نفوذ منیزیم در حالت استفاده از آلیاژ آلومینیوم 6061 مشاهده شد. نفوذ بیش‌تر منجر به ایجاد پیوند قوی‌تری بین اتم‌های منیزیم و آلومینیوم شد و در نتیجه بیشترین میزان استحکام در حدود 42 مگاپاسکال در حالت استفاده از آلیاژ 6061 آلومینیوم حاصل شد.}, keywords_fa = {اتصال نفوذی,آلیاژهای آلومینیوم,منیزیم AZ31,ریزساختار,خواص مکانیکی}, url = {https://jame.iut.ac.ir/article_2362.html}, eprint = {https://jame.iut.ac.ir/article_2362_8ad5e0f05b4ab84e85780016307e7d98.pdf} }