@article { author = {Deljavan, S. and Kakroudi, M. G. and Zaroodi, J. and Rezaei, F.}, title = {Investigation of Tantalum Cation Doped Ba (Co0.8Fe0.2) O3−δ Perovskite Phase}, journal = {Journal of Advanced Materials in Engineering (Esteghlal)}, volume = {35}, number = {1}, pages = {47-55}, year = {2022}, publisher = {Isfahan University of Technology}, issn = {2251-600X}, eissn = {2423-5733}, doi = {10.18869/acadpub.jame.35.1.47}, abstract = {Perovskite structures including oxygen vacancies are the most important group of the oxygen preamble membranes. These membranes have potentially attractive applications in the membrane reactors for partial oxidation of methane. Doping Perovskite phase in order to increase the oxygen vacancies and oxygen permeation, besides Perovskite structure stability, has been the main approach of the recent researches. In this research, tantalum was chosen as the appropriate dopant for Ba(Co0.8Fe0.2)O3−δ  Perovskite phase, according to the tolerance factor calculations. The X ray patterns of synthesized Ba (Co0.7Fe0.2Ta0.1)O3−δ indicate that the Perovskite structure was formed. Powder density, thermal expansion coefficient measurements and bond strength studies using FT-IR analysis revealed that the chosen dopant not only increases the oxygen vacancies volume but also reduces the thermal expansion coefficient without significant changes of bond strength. Results showed that the novel Ba (Co0.7Fe0.2Ta0.1) O3−δ is a good choice for the membrane fabrication of methane partial reduction reactors.}, keywords = {Membrane,Perovskites,stability,Oxygen permeability,Defect volume}, title_fa = {مطالعه فاز پروسکایت Ba(Co0.8Fe0.2)O3−δ دپه شده با کاتیون تانتالم}, abstract_fa = {پروسکایت‌ها به‌دلیل داشتن عیوب ذاتی اکسیژن از مهم‌ترین غشاهای هادی اکسیژن هستند که در ساخت راکتورهای غشایی اکسیداسیون جزئی متان مد نظر قرار می­گیرند. بررسی اثر دپه کردن فاز پروسکایت برای داشتن عیوب اکسیژن بیش‌تر و افزایش سرعت انتشار اکسیژن از غشا، در کنار حفظ پایداری ساختار همواره از محورهای اصلی پژوهش در این زمینه بوده است. در این پژوهش  بر اساس محاسبه اثر دپانت بر میزان انحراف از ساختار ایده‌آل، کاتیون تانتالم به­‌عنوان دپانت مناسب فاز پروسکایت Ba(Co0.8Fe0.2)O3−δ انتخاب شد. بررسی‌ها اثر این دپانت را در افزایش حجم عیوب با وجود بهبود ضریب انبساط حرارتی و بدون کاهش قدرت پیوند نشان می‌دهد. بر اساس نتایج، ترکیب Ba(Co0.7Fe0.2Ta0.1)O3−δ ترکیب مناسبی در ساخت غشاهای راکتورهای اکسیداسیون جزئی متان است.}, keywords_fa = {غشا,پروسکایت,پایداری,هدایت اکسیژن,حجم عیوب}, url = {https://jame.iut.ac.ir/article_2365.html}, eprint = {https://jame.iut.ac.ir/article_2365_e6196695c7b816a9ac99035f0bc53aea.pdf} }