@article { author = {Pourmohamadi, S. and Atapour, M. and Ashrafizadeh, F.}, title = {Cladding of Cr- Modified NiAl Coating on 310 Stainless Steel Weld Cladding and Evaluation of its Wear Behavior.}, journal = {Journal of Advanced Materials in Engineering (Esteghlal)}, volume = {35}, number = {4}, pages = {39-50}, year = {2022}, publisher = {Isfahan University of Technology}, issn = {2251-600X}, eissn = {2423-5733}, doi = {10.18869/acadpub.jame.35.4.39}, abstract = {In this study, a Cr-modified NiAl coating was fabricated by weld cladding technique using Gas- Tungsten Arc Welding (GTAW) process on 310 steel. Chemical composition and microstructure of the coating was studied by X-Ray Diffraction (XRD), optical microscopy and scanning electron microscopy equipped with an Energy Dispersive Spectroscopy (EDS). The wear behavior of the coated steel was examined through pin-on-disc tests at ambient temperature and 400 °C. The results showed that the hardness of coated steel increased remarkably due to the formation of Cr-modified NiAl on the surface. Furthermore, the wear experiments showed that the presence of Cr-modified NiAl coating caused significant improvement in wear resistance of cladding 310 steel at both ambient temperature and 400 °C. These results were discussed based on the wear mechanism obtained from examination of the worn surfaces using SEM.}, keywords = {Weld cladding,NiAl,Wear}, title_fa = {اعمال پوشش NiAl اصلاح شده با کروم بر فولاد زنگ‌نزن 310 با استفاده از روش روکش-کاری جوشی و ارزیابی رفتار سایشی آن}, abstract_fa = {در این پژوهش، پوششی از NiAl اصلاح شده با کروم به روش روکش‌کاری جوشی و با استفاده از فرایند جوش­کاری قوسی تنگستن-گاز (GTAW) بر سطح فولاد 310 اعمال شد. ترکیب شیمیایی و دانه‌بندی پوشش به دست آمده به کمک آزمون پراش اشعه ایکس XRD))، میکروسکوپی نوری و میکروسکوپی الکترونی روبشی مجهز به آزمون طیف‌سنجی پراکندگی انرژی (EDS) بررسی شد. سپس رفتار سایشی پوشش به‌دست آمده با استفاده از آزمون پین روی دیسک در دماهای محیط و 400 درجه‌ سانتی‌گراد مورد ارزیابی قرار گرفت. نتایج نشان داد، اعمال پوشش NiAl اصلاح شده با کروم باعث افزایش شدید سختی می‌شود. نتایج آزمون­های سایش نشان داد که پوشش NiAl اصلاح شده با کروم قادر به بهبود قابل ملاحظه مقاومت سایشی فولاد 310 در دماهای محیط و 400 درجه سانتی‌گراد است. این نتایج بر اساس مکانیزم سایشی به‌دست آمده از تصاویر میکروسکوپی الکترونی روبشی مورد بحث قرار گرفته است.}, keywords_fa = {روکش‌کاری جوشی,NiAl,سایش}, url = {https://jame.iut.ac.ir/article_2394.html}, eprint = {https://jame.iut.ac.ir/article_2394_6c787081ff47259def995ee61e958bf2.pdf} }