@article { author = {Mirarabshahi, F. and Kalantar, M. and Mashreghi, A. and Kalantar, M. and Mosalaei, M.}, title = {Investigation of Reaction Mechanism, Structure and Mechanical Properties of the In-situ Composites Fabricated in Al-V2O5-NiO System}, journal = {Journal of Advanced Materials in Engineering (Esteghlal)}, volume = {35}, number = {4}, pages = {69-81}, year = {2022}, publisher = {Isfahan University of Technology}, issn = {2251-600X}, eissn = {2423-5733}, doi = {10.18869/acadpub.jame.35.4.69}, abstract = {In this study, fabrication of an in-situ composite through aluminothermic combustion synthesis in An Al–V2O5-NiO system was investigated. Therefore, Al, V2O5 and NiO powders with stoichiometric ratio of 11:1:1, respectively, were milled for an  hour and finally the mixtures were compressed. In order to investigate the temperatures of phase transformations, Differential Thermal Analysis (DTA) was utilized. Heat treatment was applied on the raw samples according to their peak temperatures treated in DTA. X Ray Diffraction (XRD) analysis for the samples shows formation of phases such as Al3V and Al3Ni2 at different sintering temperatures. Microstructure and phase analysis showed that during sintering of this sample, Al3V phase was not formed below 700 °C, at 880 °C Al3Ni2 it was formed and after 950 °C, it was transformed to Al4Ni3 phase. In addition, after 950°C, Al3V transformed into Al23V4 phase. Analysis of samples density and hardness showed that, due to increase of volume fraction percentages of reinforcing phase, these two parameters increase as well.}, keywords = {In-situ composite,Alumiothermic,Intermetallic and ceramic compounds,Combustion synthesis}, title_fa = {بررسی مکانیزم واکنش، ساختار و خواص مکانیکی کامپوزیت درجای تولید شده در سیستم Al-V2O5-NiO}, abstract_fa = {در این پژوهش تولید کامپوزیت درجا به روش سنتز احتراقی آلومینوترمیک در سیستم Al-V2O5-NiO مورد مطالعه قرار گرفت. بدین منظور مخلوط پودرهای Al، V2O5 و NiO با نسبت استوکیومتری به‌ترتیب با درصد مولی 1:1:11 به‌مدت یک ساعت آسیاب‌کاری و سپس تحت تراکم قرار گرفتند. برای بررسی دماهای وقوع تحولات فازی از تجزیه حرارتی افتراقی استفاده شد. نمونه‌های خام با توجه به دمای پیک واکنش‌ها در تجزیه حرارتی افتراقی، تحت عملیات حرارتی قرار گرفتند. بررسی الگوهای پراش پرتو ایکس تشکیل فازهایی همانند فاز Al3V و Al3Ni2 در دماهای مختلف زینترینگ را نشان می‌دهد. بررسی‌های ریزساختاری و فازی نشان داد که در طی زینترینگ تا قبل از دمای 700 درجه سانتی‌گراد، فاز Al3V تشکیل نمی‌شود و در دمای 880 درجه سانتی‌گراد فاز Al3Ni2 تشکیل و بعد از درجه حرارت 950 درجه سانتی‌گراد نیز به فاز Al4Ni3 تبدیل می‌شود. به‌علاوه بعد از درجه حرارت 950 درجه سانتی‌گراد فاز Al3V به فاز Al23V4 تبدیل می‌شود. بررسی سختی و چگالی نیز نشان داد که این دو متغیر با افزایش درصد تقویت کننده‌ها، افزایش می‌یابند.}, keywords_fa = {کامپوزیت درجا,ترکیبات بین فلزی و سرامیکی,آلومینوترمیک,سنتز احتراقی}, url = {https://jame.iut.ac.ir/article_2396.html}, eprint = {https://jame.iut.ac.ir/article_2396_370b14ce9169e7c3888ac02ad41128fe.pdf} }