@article { author = {Hakimi, M. and Kameli, P. and Aslibeiki, B. and Faqeeh, A.}, title = {Preparation of Cobalt Ferrite Nanocrystallites by Annealing of Alloyed Intermetallic Co-Fe and Study of Magnetic Behavior}, journal = {Journal of Advanced Materials in Engineering (Esteghlal)}, volume = {35}, number = {4}, pages = {83-89}, year = {2022}, publisher = {Isfahan University of Technology}, issn = {2251-600X}, eissn = {2423-5733}, doi = {10.18869/acadpub.jame.35.4.83}, abstract = {In this work, cobalt ferrite nanocrystallites were synthesized by air annealing of milled Co-Fe compound. Effect of annealing temperature on phase formation of cobalt ferrite and structural and magnetic properties of the product was studied. Analysis of annealed sample in 450 oC showed that around 46 weight percent of the specimen was changed to Co2FeO4. This value increased to 95 and 90% for 800 oC and 900 oC annealed samples respectively. Reduction of saturation magnetization under annealing was related to transformation of Co-Fe to cobalt ferrite. Increasing the value of saturation magnetization in 900 oC annealed sample compared to 800 oC one was attributed to decreased surface to volume ratio and crystallite size. The main reason of occurrence of maximum coercivity in 800  oC annealed sample was its low crystallite size.}, keywords = {mechanical alloying,Cobalt Ferrite,coercivity,Nanocrystallite}, title_fa = {ساخت نانوبلورهای فریت کبالت با بازپخت بین فلزی Co-Fe آلیاژسازی شده و مطالعه رفتار مغناطیسی آن‌}, abstract_fa = {در این پژوهش نانوبلورهای فریت کبالت از بازپخت ترکیب آلیاژی Co-Fe حاصل از آسیاب‌کاری در اتمسفر هوا به‌دست آمد. تاثیر دمای بازپخت بر تشکیل فاز فریت کبالت و ویژگی‌های ساختاری و مغناطیسی محصول مورد مطالعه قرار گرفت. فاز‌یابی نمونه بازپخت شده در دمای 450 درجه سانتی‌گراد نشان داد که حدود 46درصد وزنی نمونه به فریت کبالت CoFe2O4 تبدیل شده است. این میزان در نمونه‌های بازپخت شده در دماهای 800 و 900 درجه سانتی‌گراد به ترتیب به 95 و 90 درصد ‌می‌رسد. کاهش مغناطش اشباع نمونه با بازپخت به تبدیل فاز Co-Fe به فریت کبالت ارتباط داده شد. اثر اندازه دانه‌ها و کم شدن نسبت سطح به حجم منجر به یک افزایش در مغناطش اشباع نمونه 900 درجه سانتی‌گراد نسبت به نمونه 800 درجه سانتی‌گراد شده است. بیشترین وادارندگی در نمونه بازپخت شده در 800 درجه سانتی‌گراد مشاهده شد که کوچک بودن اندازه بلورک‌ها در این نمونه دلیل اصلی این افزایش نسبی است.}, keywords_fa = {آلیاژسازی مکانیکی,فریت کبالت,وادارندگی,نانوبلور}, url = {https://jame.iut.ac.ir/article_2397.html}, eprint = {https://jame.iut.ac.ir/article_2397_5aa98eb821494c667bda7186b9c3d66d.pdf} }