@article { author = {Velayi, E. and Norouzbeigi, R.}, title = {Evaluation of the Effect of Polyethylene Glycol Addition on the Wetting Properties of ZnO Superhydrophobic Surfaces Prepared via Chemical Bath Deposition Method}, journal = {Journal of Advanced Materials in Engineering (Esteghlal)}, volume = {36}, number = {4}, pages = {69-88}, year = {2022}, publisher = {Isfahan University of Technology}, issn = {2251-600X}, eissn = {2423-5733}, doi = {10.29252/jame.36.4.69}, abstract = {A superhydrophobic ZnO surface was prepared on the stainless steel mesh by a one-step chemical bath deposition method without chemical post-treatment. The effect of adding polyethylene glycol 6000 (PEG 6000) as an organic additive and the type of the alkaline agent were investigated on the morphological and wettability properties of ZnO surfaces. The prepared surfaces were characterized by X-ray Diffraction (XRD), stylus profilometer, Scanning Electron Microscope (SEM), Fourier Transform Infrared (FTIR) and Raman Spectrometer. The microstructure studies showed that the addition of PEG led to formation of densely branched and uniform ZnO rods with a length of 1.5 µm and a diameter of about 95 nm on the substrate. The surface wettability studies confirmed that the sample prepared in the presence of hexamethylenetetramine (HMTA) and 0.05 mM PEG with branched tree-like micro/nanostructure exhibited excellent superhydrophobic properties with the water contact angle (WCA) of 158.2°±1.5° and contact angle hysteresis (CAH) of 3.5°. In addition, the superhydrophobic showed good  chemical stability in the pH range of 4 to 8.}, keywords = {Chemical bath deposition method,Superhydrophobic surface,Polyethylene glycol,Static water contact angle,Chemical stability}, title_fa = {بررسی اثر پلی‌اتیلن گلایکول بر رفتار ترشوندگی سطوح آبگریز ZnO تهیه شده به‌روش رسوب‌دهی حمام شیمیایی}, abstract_fa = {در این تحقیق، سطح فوق آبگریز ZnO به‌روش رسوب‌دهی حمام شیمیایی بر توری از جنس فولاد زنگ‌نزن به‌صورت تک مرحله‌ای و بدون اصلاح سطح تهیه شده و تأثیر اضافه کردن پلی‌اتیلن گلایکول به‌عنوان افزودنی آلی و همچنین نوع ماده بازی بر مورفولوژی و به تبع آن خواص ترشوندگی سطح مورد بررسی قرار گرفته است. برای ارزیابی نمونه سنتز شده از آنالیزهای پراش سنج پرتو ایکس، زبری‌سنج سوزنی، تصاویر میکروسکوپی الکترونی روبشی، طیف‌سنجی مادون قرمز و میکرو رامان استفاده شد. مطالعه میکروساختار نمونه‌های ساخته شده نشان داد که اضافه کردن پلی‌اتیلن گلایکول منجر به تشکیل لایه یکنواخت و متراکم از میله‌های ZnO شاخه‌دار با متوسط طول 5/1 میکرومتر و قطر 95 نانومتر بر سطح زیرلایه شده است. بررسی نتایج ترشوندگی سطح تأیید کرد نمونه ساخته شده با هگزامتیلن تترامین و در حضور 05/0 میلی‌مولار پلی‌اتیلن گلایکول با ساختار میکرو- نانو درختسان شاخه‌دار با زاویه تماس 5/5±2/158 درجه و پسماند زاویه تماس 5/3 درجه بهترین رفتار فوق آبگریزی را داشته است. سطوح تهیه شده همچنین از پایداری شیمیایی بسیار خوب در محدوده pH، چهار تا هشت برخوردار هستند.}, keywords_fa = {روش رسوب‌دهی حمام شیمیایی,سطح فوق آبگریز,پلی‌اتیلن گلایکول,زاویه تماس استاتیک,پایداری شیمیایی}, url = {https://jame.iut.ac.ir/article_2436.html}, eprint = {https://jame.iut.ac.ir/article_2436_8078cfab0d81be892b2bbaeccd29ddaa.pdf} }