@article { author = {Panahi Moghadam, A. and Seifollahi, M. and Abbasi, S. M.}, title = {The Effect of Mg on Microstructure and High Temperature Mechanical Properties of Hasteloy X Superalloy}, journal = {Journal of Advanced Materials in Engineering (Esteghlal)}, volume = {37}, number = {2}, pages = {29-37}, year = {2022}, publisher = {Isfahan University of Technology}, issn = {2251-600X}, eissn = {2423-5733}, doi = {10.29252/jame.37.2.29}, abstract = {This paper was concerned with the effect of Mg on the temperature mechanical behavior and evaluation of the microstructure. The results showed that with increasing Mg from 0 to 47 ppm, the grain size was reduced from 64 to 38 µm and the carbides volume fraction was raised from 2.2 to 4.6 vot%. Mg changed the morphology of the carbide from a coarse and continuous one to a separate one. Mg with the mechanisms of grain boundary and matrix/carbide boundary led to changing the carbide composition and also, the mechanical properties. Mg increment from 0 to 47 ppm caused the enhancement of yield strength and rupture life from 309 to 345 MPa and from 16h to 30h, respectively. Grain size and the amount of carbide were the main factors contributing to the rupture of life properties in this study. The increment of the carbide volume fraction was the main mechanism of rupture life enhancement.}, keywords = {Hastelloy X Superalloy,Mg,Carbide Volume Fraction,Tensile Properties,Rupture Properties}, title_fa = {تأثیر افزودن جزئی منیزیم بر ریزساختار و خواص مکانیکی دما بالای سوپرآلیاژ Hastelloy X}, abstract_fa = {هدف از پژوهش حاضر، ارزیابی تأثیر افزودن جزئی منیزیم بر رفتار مکانیکی دما بالا و تغییرات ریزساختاری سوپرآلیاژ Hastelloy X است. نتایج نشان می‌دهد که با افزایش منیزیم از صفر تا  ppm47، اندازه دانه از 64 به 38 میکرومتر کاهش و میزان کسر حجمی کاربیدها از 2/2 به 6/4 درصد افزایش یافته است. همچنین منیزیم توزیع ذرات کاربیدی در زمینه را از درشت و پیوسته به‌صورت مجزا تغییر داده است. منیزیم با مکانیزم جدایش در مرزدانه و در مرز کاربید/ زمینه منجر به تغییر ترکیب شیمیایی کاربیدها شده و خواص مکانیکی آلیاژ را تحت تأثیر قرار می‌دهد. افزایش منیزیم از صفر تا ppm 47 باعث افزایش استحکام کششی از 309 به 345 مگاپاسکال، کاهش داکتیلیته و افزایش عمر گسیختگی از 16 به 30 ساعت شده است. اندازه دانه و میزان کاربیدها عوامل تأثیرگذاری در میزان عمر گسیختگی است و در این پژوهش افزایش میزان کاربیدها در اثر افزودن منیزیم مکانیزم غالب بر افزایش عمر گسیختگی است.  }, keywords_fa = {سوپرآلیاژ Hastelloy X,منیزیم,کسرحجمی کاربید,خواص کششی,خواص تنش- گسیختگی}, url = {https://jame.iut.ac.ir/article_2453.html}, eprint = {https://jame.iut.ac.ir/article_2453_0b7f22016b5533c96a13e6c9847f6ae7.pdf} }