@article { author = {Sarafrazian, S. and Tavoosi, M. and Ghasemi, A.}, title = {THE EFFECT OF ANNEALING ON MAGNETIC PROPERTIES OF MELT SPUN ND2FE14B INTERMETALLIC ALLOY}, journal = {Journal of Advanced Materials in Engineering (Esteghlal)}, volume = {40}, number = {2}, pages = {31-45}, year = {2022}, publisher = {Isfahan University of Technology}, issn = {2251-600X}, eissn = {2423-5733}, doi = {10.47176/jame.40.2.15014}, abstract = {The aim of this study was optimization of the annealing process in melt spun Nd2Fe14B intermetallic magnetic alloy. In this regard, the melt spinning process was done at wheel speed of 40 m.s-1. In order to achieving the desired microstructure, the as-spun ribbons were subsequently annealed at temperature range of 500 to 700 ºC for different periods of time. Structural and magnetic characterization of produced samples were performed by X-ray diffraction (XRD), scanning electron microscopy (SEM) and vibrating sample magnetometer (VSM). The results showed that the structure of as-spun ribbons at wheel speed of 40m.s-1 was composed of Fe-α, Nd2Fe14B and amorphous phases with the coercivity and saturation of magnetization in the range of 0.14 kOe and 120 emu/g, respectively. By annealing the produced ribbons and crystallization of the amorphous phase, the percentage of Fe-α and Nd2Fe14B was decreased and increased, respectively. The optimum annealing conditions for achieving the highest value of coercivity (about 9.2 kOe) was 600°C for 6h.}, keywords = {Nanomagnet,melt spinning,annealing,Intermetallic}, title_fa = {تأثیر عملیات حرارتی بر خواص مغناطیسی ترکیب بین‌فلزی Nd2Fe14B حاصل از فرایند ذوب‌ریسی}, abstract_fa = {هدف از پژوهش حاضر بهینه‌سازی شرایط عملیات حرارتی در ترکیب بین‌فلزی مغناطیسی Nd2Fe14B حاصل از فرایند ذوب‌ریسی است. بر این اساس، ابتدا پیش‌ماده مورد نظر به‌روش مذاب ریسی و با سرعت دیسک مبرد 40 متر بر ثانیه تهیه شد. سپس محصول تولیدی در محدوده دمایی 500 تا 700 درجه سانتی‌گراد به‌مدت یک تا هشت ساعت تحت عملیات حرارتی قرار گرفت. ارزیابی‌های ساختاری و مغناطیسی توسط پراش‌سنجی پرتوی ایکس (XRD)، میکروسکوپ الکترونی روبشی (SEM) و مغناطومتر ارتعاشی (VSM) انجام شد. نتایج حاصل نشان داد که ساختار نوارهای مذاب‌ریسی شده، متشکل از رسوبات آهن- آلفا و Nd2Fe14B در زمینه‌ فاز آمورف است. مقدار میدان وادرندگی و مغناطش اشباع نمونه‌ مورد بحث در حدود kOe 0/14 و emu/g120 برآورد شد. با انجام عملیات حرارتی و به‌دنبال آن تبلور فاز آمورف، به‌تدریج از درصد فاز آهن- آلفا کاسته شده و ساختار تک‌فازی از ترکیب بین‌فلزی مغناطیسی  Nd2Fe14B حاصل می‌آید. بهینه شرایط عملیات حرارتی در این نمونه دمای 600 درجه‌ سانتی‌گراد و زمان شش ساعت تشخیص داده شد که در آن میدان وادارندگی مغناطیسی به بیش از kOe9 می‌رسد.}, keywords_fa = {نانومغناطیس سخت,مذاب‌ریسی,عملیات حرارتی,ترکیب بین‌فلزی}, url = {https://jame.iut.ac.ir/article_2549.html}, eprint = {https://jame.iut.ac.ir/article_2549_1ee1d29f077eb72b0b56af26069fee38.pdf} }