@article { author = {Rafati, F. and Johari, N. and Zohari, F.}, title = {INVESTIGATION OF THE INFLUENCE OF ZINC OXID CONTENT AND SCAFFOLD MORPHOLOGY ON THE MECHANICAL PROPERTIES OF POLY(ε-CAPROLACTONE) / ZINC OXIDE NANOCAMPOSITE SCAFFOLDS}, journal = {Journal of Advanced Materials in Engineering (Esteghlal)}, volume = {40}, number = {4}, pages = {85-97}, year = {2022}, publisher = {Isfahan University of Technology}, issn = {2251-600X}, eissn = {2423-5733}, doi = {10.47176/jame.40.4.23951}, abstract = {In the present study, PCL/ZnO nanocomposite scaffolds containing 0, 5, and 15 wt.% of ZnO nanoparticles were prepared via the salt leaching/solvent casting method. The influence of ZnO nanoparticles on the morphology of prepared PCL/ZnO scaffolds was investigated using SEM images. The compressive strength test evaluated the effect of scaffolds’ morphology on mechanical properties. The XRD technique confirmed the desired phases in the scaffold composition. The results showed that the compressive strength and structural integrity of the scaffolds increased by increasing ZnO nanoparticles content as the reinforcement. However, the compressive strength and structural integrity decreased by increasing the amount of ZnO nanoparticles up to more than 5 wt.%. In summary, PCL/ZnO nanocomposite scaffold containing 5 wt.% of ZnO nanoparticles revealed the highest strength, compressive modulus, and structural integrity.}, keywords = {Poly(ε-caprolactone)/zinc oxide,morphology,mechanical properties}, title_fa = {ارزیابی تأثیر میزان اکسید روی و مورفولوژی داربست‌‌های نانوکامپوزیتی پلی‌کاپرولاکتون/ نانوذرات اکسید روی بر خواص مکانیکی این داربست‌‌ها}, abstract_fa = {ویژگی‌‌های مکانیکی و ساختاری داربست‌‌های مهندسی بافت یکی از عوامل مهم در بازسازی و ترمیم بافت محسوب می‌‌شوند. از این‌رو، در پژوهش حاضر، به بررسی تأثیر میزان نانوذرات اکسید روی و مورفولوژی داربست بر خواص مکانیکی داربست‌های نانوکامپوزیتی پلی‌کاپرولاکتون/ نانوذرات اکسید روی پرداخته شد. در این پژوهش، داربست‌های نانوکامپوزیتی پلی‌کاپرولاکتون/ نانوذرات اکسید روی به روش ریخته‌گری حلال/ شستشوی ذرات نمک و با سه غلظت متفاوت 0، 5 و 15 درصد وزنی نانوذرات اکسید روی تهیه شدند. سپس، از روش پراش پرتو ایکس (XRD) به‌منظور تأیید فازهای مطلوب در ترکیب داربست استفاده شد. استحکام فشاری داربست‌‌های ساخته شده نیز به‌عنوان شاخصی از خواص مکانیکی، ارزیابی شد. همچنین، به‌منظور بررسی مورفولوژی و تخلخل داربست‌‌ها و توزیع نانوذرات اکسید روی در داربست از میکروسکوپ الکترونی روبشی (SEM) استفاده شد. نتایج به‌دست آمده نشان داد که با افزودن نانوذرات اکسید روی به‌عنوان تقویت‌کننده، استحکام فشاری داربست‌‌ها افزایش می‌‌یابد. از سوی دیگر، با افزایش نانوذرات اکسید روی به بیش از 5 درصد وزنی، استحکام فشاری کاهش یافت. در واقع، داربست نانوکامپوزیتی پلی‌کاپرولاکتون/ اکسید روی با 5 درصد وزنی اکسید روی بیشترین میزان استحکام و مدول فشاری و یکپارچگی ساختار را داشت. }, keywords_fa = {داربست نانوکامپوزیتی پلی‌کاپرولاکتون/ اکسید روی,مورفولوژی,خواص مکانیکی}, url = {https://jame.iut.ac.ir/article_2566.html}, eprint = {https://jame.iut.ac.ir/article_2566_86e94f406b80719d71b6a453ee57ee37.pdf} }