<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ArticleSet PUBLIC "-//NLM//DTD PubMed 2.7//EN" "https://dtd.nlm.nih.gov/ncbi/pubmed/in/PubMed.dtd">
<ArticleSet>
<Article>
<Journal>
				<PublisherName>دانشگاه صنعتی اصفهان</PublisherName>
				<JournalTitle>مواد پیشرفته در مهندسی</JournalTitle>
				<Issn>2251-600X</Issn>
				<Volume>44</Volume>
				<Issue>4</Issue>
				<PubDate PubStatus="epublish">
					<Year>2025</Year>
					<Month>12</Month>
					<Day>22</Day>
				</PubDate>
			</Journal>
<ArticleTitle>The Effect of Lignin Concentration on the Morphology and Structure of Silk Fibroin Nanofibers</ArticleTitle>
<VernacularTitle>تأثیر غلظت لیگنین بر مورفولوژی و ساختار نانو الیاف فیبروئین ابریشم</VernacularTitle>
			<FirstPage>1</FirstPage>
			<LastPage>14</LastPage>
			<ELocationID EIdType="pii">3613</ELocationID>
			
<ELocationID EIdType="doi">10.47176/jame.44.4.1107</ELocationID>
			
			<Language>FA</Language>
<AuthorList>
<Author>
					<FirstName>امیرحسین</FirstName>
					<LastName>محمدی‌فرد</LastName>
<Affiliation>دانشکده مهندسی مواد، دانشگاه صنعتی اصفهان، اصفهان 84156-83111، ایران</Affiliation>
<Identifier Source="ORCID">0009-0008-6521-5594</Identifier>

</Author>
<Author>
					<FirstName>مهشید</FirstName>
					<LastName>خرازیها</LastName>
<Affiliation>دانشکده مهندسی مواد، دانشگاه صنعتی اصفهان، اصفهان 84156-83111، ایران</Affiliation>
<Identifier Source="ORCID">0000-0002-5782-8007</Identifier>

</Author>
<Author>
					<FirstName>مسعود</FirstName>
					<LastName>عطاپور</LastName>
<Affiliation>دانشکده مهندسی مواد، دانشگاه صنعتی اصفهان، اصفهان 84156-83111، ایران</Affiliation>
<Identifier Source="ORCID">0000-0001-6333-0179</Identifier>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2025</Year>
					<Month>01</Month>
					<Day>25</Day>
				</PubDate>
			</History>
		    <Abstract>Introduction and Objectives: With the rapid advancement of nanotechnology and the enhanced properties of materials at the nanoscale, electrospinning has emerged as a promising technique for restoring the functionality of damaged tissues due to its porous structure, which facilitates oxygen and gas permeability. This study aims to investigate the effect of lignin concentration on the morphology and structure of silk fibroin nanofibers to achieve uniform fibers suitable for biomedical applications.Materials and Methods: Silk fibroin was first extracted from silkworm cocoons and blended with lignin at ratios ranging from 5:1 to 7:1. Nanofibers were then fabricated using electrospinning at three voltage levels: 20, 25, and 30 kV. To assess the successful extraction of fibroin and the fabrication of fibers, various characterization techniques were employed. Initially, scanning electron microscopy was used to analyze the morphological characteristics, followed by contact angle measurements.Results: The findings indicated that both pure silk fibroin fibers and silk fibroin-lignin composite fibers fabricated at 20 kV with lignin ratios of 5:1, 6:1, and 7:1 exhibited uniform structures, with average diameters of 241.44 ± 37 nm, 309.10 ± 11 nm, 164.05 ± 74 nm, and 181.38 ± 58 nm, respectively. Moreover, contact angle analysis revealed that the water contact angle of pure silk fibroin (49 ± 5°) increased to 63 ± 4°, 66 ± 2°, and 71 ± 6° for composite fibers with lignin ratios of 5:1, 6:1, and 7:1, respectively.Conclusion: Given that the contact angle values fall within the range of 55–75° and the nanofibers exhibit a uniform structure, silk fibroin-lignin composite nanofibers provide a favorable surface for cell adhesion and proliferation, making them promising candidates for biomedical applications.</Abstract>
			<OtherAbstract Language="FA">مقدمه و اهداف: با توجه به گسترش روزافزون فناوری نانو و خواص بهبودیافته مواد در مقیاس نانو، الکتروریسی به علت ساختار متخلخل با قابلیت عبور اکسیژن و گاز، روشی امیدوارکننده برای بازگرداندن عملکرد بافت‌های آسیب‌دیده می‌باشد. هدف این پژوهش، بررسی تأثیر غلظت لیگنین بر مورفولوژی و ساختار نانوالیاف فیبروئین ابریشم به منظور دستیابی به الیاف یکنواخت، جهت کاربردهای زیست‌پزشکی می‌باشد.مواد و روش‌ها: ابتدا فیبروئین ابریشم از پیله‌های کرم ابریشم استخراج و با افزودن لیگنین با نسبت‌های 5:1 تا 7:1  تهیه و با الکتروریسی در سه ولتاژ 20، 25 و 30 کیلوولت، نانوالیاف ساخته شد. برای ارزیابی موفقیت استخراج فیبروئین و تولید الیاف، مشخصه‌یابی آن‌ها با روش‌های مختلف انجام شد. ابتدا، مورفولوژی با میکروسکوپ الکترونی روبشی بررسی شد و سپس زاویه تماس ارزیابی گردید.یافته‌ها: نتایج نشان داد که الیاف فیبروئین ابریشم خالص و کامپوزیت فیبروئین ابریشم-لیگنین در نسبت‌های 5:1، 6:1 و 7:1، در ولتاژ 20 کیلوولت، یکنواخت بوده و به ترتیب دارای قطری برابر با  37 ± 241/44، 11 ± 309/10، 74 ± 164/05 و 58 ± 181/38 نانومتر است. ارزیابی زاویه تماس نشان داد که زاویه تماس با آب در فیبروئین ابریشم خالص (°5±49) در کامپوزیت‌های ساخته‌شده با نسبت‌های 5:1، 6:1 و 7:1 به ترتیب به °4±63، °2±66 و °6±71 افزایش یافت.نتیجه‌گیری: با توجه به قرارگیری زاویه تماس در محدوده ۵۵ تا ۷۵ درجه و تشکیل نانوالیاف یکنواخت، نانوالیاف کامپوزیتی فیبروئین ابریشم-لیگنین بستر مناسبی برای رشد و تکثیر سلولی فراهم کرده و پتانسیل استفاده در کاربردهای زیستی را دارد.</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">الکتروریسی</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">فیبروئین ابریشم</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">لیگنین</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">مورفولوژی</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">ترشوندگی</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jame.iut.ac.ir/article_3613_c4fa7aecedac73641320d24d5bf3bf38.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>دانشگاه صنعتی اصفهان</PublisherName>
				<JournalTitle>مواد پیشرفته در مهندسی</JournalTitle>
				<Issn>2251-600X</Issn>
				<Volume>44</Volume>
				<Issue>4</Issue>
				<PubDate PubStatus="epublish">
					<Year>2025</Year>
					<Month>12</Month>
					<Day>22</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Investigating the Effect of Deformation Temperature on the Structure and Mechanical Properties of AISI 304 Stainless Steel</ArticleTitle>
<VernacularTitle>بررسی اثر دمای تغییر‌شکل بر ریزساختار و خواص مکانیکی فولاد زنگ‌نزن AISI 304</VernacularTitle>
			<FirstPage>15</FirstPage>
			<LastPage>31</LastPage>
			<ELocationID EIdType="pii">3614</ELocationID>
			
<ELocationID EIdType="doi">10.47176/jame.44.4.1103</ELocationID>
			
			<Language>FA</Language>
<AuthorList>
<Author>
					<FirstName>سارا</FirstName>
					<LastName>اسکندری‌نژاد</LastName>
<Affiliation>دانشکده مهندسی معدن و متالورژی، دانشگاه یزد، یزد، ایران</Affiliation>
<Identifier Source="ORCID">0000-0002-8950-1770</Identifier>

</Author>
<Author>
					<FirstName>علیرضا</FirstName>
					<LastName>مشرقی</LastName>
<Affiliation>دانشکده مهندسی معدن و متالورژی، دانشگاه یزد، یزد، ایران</Affiliation>
<Identifier Source="ORCID">0000-0003-0070-9354</Identifier>

</Author>
<Author>
					<FirstName>سعید</FirstName>
					<LastName>حسنی</LastName>
<Affiliation>دانشکده مهندسی معدن و متالورژی، دانشگاه یزد، یزد، ایران</Affiliation>
<Identifier Source="ORCID">0000-0001-7093-8262</Identifier>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2025</Year>
					<Month>01</Month>
					<Day>07</Day>
				</PubDate>
			</History>
		    <Abstract>Introduction and targets: AISI 304 austenitic stainless steel is widely recognized for its excellent corrosion resistance and mechanical properties, making it suitable for various industrial applications. However, the presence of non-equilibrium δ-ferrite phase can significantly compromise these properties. This study aims to optimize the hot deformation process to dissolve the residual δ-ferrite in AISI 304 stainless steel by adjusting the deformation temperature and the degree of reduction.Materials and methods: The sheet was hot rolled at temperatures ranging from 1050 °C to 1150 °C. Hot rolling was performed with reductions in cross-sectional area of 30% and 60%. Phase percentage and grain size were analyzed using image analysis software, and the hardness and tensile properties of the hot-rolled samples were examined.Results: Results of image analysis showed that the amount of ferrite in the rolled sample heated at 1150 °C and with a percentage reduction area of 60% reached its lowest level, namely 0.39%. Additionally, with decreasing rolling temperature and increasing the reduction of area, the average grain size became smaller and, as a result, the hardness of the samples increased. As a result, performing hot rolling at a temperature of 1150 °C with a 60% reduction of area led to decrease the grain size to the lowest value of 54.73 µm. The tensile test results also revealed that this sample had the highest yield stress of 345 MPa and the ultimate tensile strength of 653 MPa.Conclusion: The results declared that the best conditions for ferrite removal were rolling at a temperature of 1150 °C with a percentage of cross-sectional area reduction of 60%.</Abstract>
			<OtherAbstract Language="FA">مقدمه و اهداف: فولاد زنگ‌نزن آستینیتی AISI 304 به دلیل مقاومت عالی در برابر خوردگی و اکسیداسیون، کاربرد فراوانی در صنایع مختلف دارد. این در حالی است که وجود فاز مغناطیسی فریت  در این فولاد، می‌تواند به‌شدت خواص آن را تضعیف کند. ازاین‌رو، در این پژوهش سعی شده است تا با بهینه‌سازی دما و میزان کاهش سطح مقطع در فرایند تغییرشکل گرم، فاز فریت  باقیمانده حل شود.مواد و روش‌ها: فولاد مورد نظر، در محدوده دمایی 1050 تا 1200 درجه سانتی‌گراد، تحت عملیات نورد گرم با دو درصد کاهش سطح مقطع 30 و 60 درصد قرار گرفت. سپس درصد فازهای موجود در نمونه‌ها و اندازه دانه‌ها اندازه‌گیری شد. همچنین سختی و رفتار کششی نمونه‌ها بررسی شد.یافته‌ها: نتایج حاصل از آنالیز تصویر نشان داد که میزان فریت موجود در ساختار نمونه نورد گرم‌شده در دمای 1150 درجه سانتی‌گراد و با درصد کاهش سطح مقطع ۶۰ درصد، به کم‌ترین میزان خود یعنی 0/39 درصد رسیده است. درحالی‌که با کاهش دمای نورد و افزایش میزان کاهش سطح مقطع میانگین اندازه دانه‌ها کوچک‌تر و درنتیجه میزان سختی نمونه‌ها افزایش یافت؛ بنابراین، انجام عملیات نورد گرم در دمای 1050 درجه سانتی‌گراد با کاهش سطح مقطع 60%، اندازه دانه‌ به کمترین مقدار( µm 54/73) کاهش یافت. همچنین نتایج آزمون کشش نیز نشان داد که این نمونه بیشترین میزان تنش تسلیم برابر با MPa 345 و استحکام نهایی برابر با MPa 653 را دارد.نتیجه‌گیری: نتایج نشان داد که بهترین شرایط حذف فریت نورد دردمای 1150 درجه سانتی‌گراد و با درصد کاهش سطح مقطع ۶۰ درصد بوده است.</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">فولاد زنگ‌نزن آستنیتی</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">AISI 304</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">تغییرشکل گرم</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">فریت δ</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">خواص مکانیکی</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jame.iut.ac.ir/article_3614_6add07cf50424b14fdf649da87843d01.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>دانشگاه صنعتی اصفهان</PublisherName>
				<JournalTitle>مواد پیشرفته در مهندسی</JournalTitle>
				<Issn>2251-600X</Issn>
				<Volume>44</Volume>
				<Issue>4</Issue>
				<PubDate PubStatus="epublish">
					<Year>2025</Year>
					<Month>12</Month>
					<Day>22</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Investigating the Effect of Bentonite Heat Treatment Cycle on the Properties of Iron Ore Pellets</ArticleTitle>
<VernacularTitle>بررسی تأثیر سیکل عملیات حرارتی بنتونیت بر خواص گندله سنگ آهن</VernacularTitle>
			<FirstPage>33</FirstPage>
			<LastPage>53</LastPage>
			<ELocationID EIdType="pii">3615</ELocationID>
			
<ELocationID EIdType="doi">10.47176/jame.44.4.1100</ELocationID>
			
			<Language>FA</Language>
<AuthorList>
<Author>
					<FirstName>علی</FirstName>
					<LastName>میرزائی</LastName>
<Affiliation>شرکت پایا صنعت سما شهرک علمی تحقیقاتی اصفهان، اصفهان83111-84156 ایران</Affiliation>
<Identifier Source="ORCID">0009-0009-1390-1004</Identifier>

</Author>
<Author>
					<FirstName>ابوالفضل</FirstName>
					<LastName>قدیری</LastName>
<Affiliation>شرکت پایا صنعت سما شهرک علمی تحقیقاتی اصفهان، اصفهان83111-84156 ایران</Affiliation>

</Author>
<Author>
					<FirstName>علی</FirstName>
					<LastName>مظاهری</LastName>
<Affiliation>شرکت پایا صنعت سما شهرک علمی تحقیقاتی اصفهان، اصفهان83111-84156 ایران</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2024</Year>
					<Month>12</Month>
					<Day>29</Day>
				</PubDate>
			</History>
		    <Abstract>Introduction and Objectives: The quality of produced pellets is directly dependent on the physicochemical properties of the bentonite used. This research aims to investigate the effect of heat treatment on the characteristics of bentonite and to evaluate the properties of the obtained raw and fired pellets.Materials and Methods: In this study, the impact of heat treatment on the properties of bentonite, as a binder additive in a pelletizing unit, was investigated. A sample of sodium bentonite from South Khorasan mines was selected as the raw material. Following thermal analyses, temperatures of 400, 800, and 1300 °C were chosen as heat treatment temperatures. X-ray diffraction (XRD), elemental analysis, and scanning electron microscopy (SEM) were employed to analyze the phase and structural characteristics of the samples after heat treatment. Water absorption, swelling percentage of the samples, and the properties of pellets produced from the heat-treated bentonite were examined to assess the effect of heat treatment on bentonite properties.Results: The results indicated that heat treatment led to structural and phase changes in bentonite. SEM images of raw bentonite revealed that the particle morphology and porosity of bentonite changed with increasing heat treatment temperature. Furthermore, the zeta potential test was utilized to compare the electrical potential difference between the layers of the samples. The results showed that heat-treated bentonite particles at 400 °C exhibited a lower tendency to settle.Conclusion: The results of this study declared that heat treatment up to 400 °C improved the properties of bentonite and the obtained pellets.</Abstract>
			<OtherAbstract Language="FA">مقدمه و اهداف: کیفیت گندله‌های تولیدی، به‌طور مستقیم به خواص فیزیکی و شیمیایی بنتونیت مصرفی بستگی دارد. این پژوهش با هدف بررسی تاثیر عملیات حرارتی بر ویژگی‌های بنتونیت و بررسی خواص گندله خام و پخته‌شده حاصل از آن می‌پردازد. مواد و روش‌ها: در این تحقیق، تأثیر عملیات حرارتی بر خواص بنتونیت، به‌عنوان یک افزودنی اتصال‌دهنده در واحد گندله‌سازی، موردبررسی قرار گرفت. نمونه‌ای از بنتونیت سدیمی از معادن خراسان جنوبی به‌عنوان ماده اولیه انتخاب شد و پس از انجام آنالیزهای حرارتی، دماهای 400، 800 و 1300 درجه سانتی‌گراد به‌عنوان دماهای عملیات حرارتی انتخاب گردید. به‌منظور تحلیل فازی و ساختاری نمونه‌ها پس از عملیات حرارتی، از آنالیزهای پراش پرتو ایکس ، آنالیز عنصری و میکروسکوپ الکترونی روبشی استفاده شد. برای بررسی تاثیر عملیات حرارتی روی خواص بنتونیت، جذب آب، درصد تورم نمونه‌ها و همچنین خواص گندله حاصل از بنتونیت عملیات حرارتی‌شده بررسی و ارزیابی شد.یافته‌ها: نتایج نشان داد که عملیات حرارتی، باعث ایجاد تغییرات ساختاری و فازی در بنتونیت می‌شود. تصاویر میکروسکوپی الکترونی روبشی از بنتونیت خام نشان داد که با افزایش دمای عملیات حرارتی، شکل ذرات و منافذ بنتونیت تغییر پیدا کرده است. همچنین، به‌منظور مقایسه میزان اختلاف‌پتانسیل الکتریکی بین لایه‌های نمونه‌ها، از آزمون پتانسیل زتا استفاده شد. نتایج نشان داد که ذرات بنتونیت عملیات حرارتی‌شده در 400 درجه سانتی‌گراد، تمایل کمتری به ته‌نشین شدن دارند.نتیجه‌گیری: نتایج این پژوهش نشان داد که انجام عملیات حرارتی تا دمای 400 درجه سانتی‌گراد خواص بنتونیت و گندله‌های تولیدی از آن را بهبود بخشیده است.</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">واحد گندله‌سازی سنگ‌آهن</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">بنتونیت سدیمی</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">عملیات حرارتی</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">مونت‌موریلونیت</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">استحکام گندله</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jame.iut.ac.ir/article_3615_d8c9d05ec6e86d5bbad7a2f88a1701d0.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>دانشگاه صنعتی اصفهان</PublisherName>
				<JournalTitle>مواد پیشرفته در مهندسی</JournalTitle>
				<Issn>2251-600X</Issn>
				<Volume>44</Volume>
				<Issue>4</Issue>
				<PubDate PubStatus="epublish">
					<Year>2025</Year>
					<Month>12</Month>
					<Day>22</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Preparation and Characterization of Hyaluronic Acid-based Composite Films for Wound Dressing Applications</ArticleTitle>
<VernacularTitle>تهیه و مشخصه‌یابی فیلم‌های کامپوزیتی پایه هیالورونیک اسید برای کاربردهای زخم‌پوش</VernacularTitle>
			<FirstPage>55</FirstPage>
			<LastPage>73</LastPage>
			<ELocationID EIdType="pii">3616</ELocationID>
			
<ELocationID EIdType="doi">10.47176/jame.44.4.1119</ELocationID>
			
			<Language>FA</Language>
<AuthorList>
<Author>
					<FirstName>فرهاد</FirstName>
					<LastName>احمدی</LastName>
<Affiliation>گروه بیومواد، پژوهشکده نانو و مواد پیشرفته، پژوهشگاه مواد و انرژی، البرز، ایران</Affiliation>
<Identifier Source="ORCID">0000-0003-2531-3823</Identifier>

</Author>
<Author>
					<FirstName>سید مجتبی</FirstName>
					<LastName>حسینی فرد</LastName>
<Affiliation>گروه محیط زیست و انرژی، پژوهشکده انرژی، پژوهشگاه مواد و انرژی، البرز، ایران</Affiliation>
<Identifier Source="ORCID">0000-0003-3770-5963</Identifier>

</Author>
<Author>
					<FirstName>محمدرضا</FirstName>
					<LastName>واعظی جزه</LastName>
<Affiliation>گروه نانومواد، پژوهشکده نانو و مواد پیشرفته، پژوهشگاه مواد و انرژی، البرز، ایران</Affiliation>
<Identifier Source="ORCID">0000-0002-6238-9678</Identifier>

</Author>
<Author>
					<FirstName>لیلا</FirstName>
					<LastName>محمدی</LastName>
<Affiliation>گروه نانومواد، پژوهشکده نانو و مواد پیشرفته، پژوهشگاه مواد و انرژی، البرز، ایران</Affiliation>
<Identifier Source="ORCID">0000-0001-5741-1503</Identifier>

</Author>
<Author>
					<FirstName>محمد علی</FirstName>
					<LastName>نیلفروش‌زاده</LastName>
<Affiliation>گروه پوست، مرکز تحقیقات پوست و سلول های بنیادی، دانشگاه علوم پزشکی تهران، تهران، ایران</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2025</Year>
					<Month>03</Month>
					<Day>12</Day>
				</PubDate>
			</History>
		    <Abstract>Introduction and Objectives: Hyaluronic acid is widely used in wound dressings due to its biocompatibility, moisture retention, and wound healing properties. However, its poor mechanical strength, limited stability in moist environments, and insufficient antibacterial activity restrict its clinical applications. This study aims to improve the performance of hyaluronic acid -based films by incorporating chitosan and employing glutaraldehyde and tannic acid as dual crosslinking agents. The novelty of this work lies in the simultaneous use of the two chemical modifiers.Materials and Methods: Composite films were prepared by blending hyaluronic acid and chitosan at a defined ratio and chemically modified using glutaraldehyde and tannic acid. FTIR spectroscopy was used to evaluate chemical interactions and bond formation. Mechanical properties were assessed via tensile testing. Water contact angle, swelling ratio, cytotoxicity, and antibacterial activity were examined to evaluate biological performance.Results: FTIR analysis confirmed new covalent and hydrogen bonding interactions leading to a stable crosslinked structure. Modified films exhibited a Young’s modulus of 1.5–2 MPa, tensile strength of 2 MPa, and a water contact angle of 45°, indicating enhanced mechanical strength and moderate hydrophilicity. The water absorption capacity reached 733%, and cell viability remained within 85–90% at the optimized glutaraldehyde concentration, confirming good biocompatibility. However, no significant antibacterial activity was observed.Conclusion: The incorporation of chitosan and dual crosslinking with glutaraldehyde and tannic acid significantly enhanced the mechanical, wetting, and biocompatibility properties of hyaluronic acid-based films, making them promising candidates for wound dressing applications. Further enhancement of antibacterial activity, possibly by incorporating antibacterial nanoparticles, is recommended for broader clinical use.</Abstract>
			<OtherAbstract Language="FA">مقدمه و اهداف: هیالورونیک اسید، به‌دلیل ویژگی‌های زیست‌سازگاری، نگهداشت رطوبت و ترمیم زخم، یکی از مواد پرکاربرد در زخم‌پوش‌ها است؛ اما محدودیت‌هایی نظیر ضعف مکانیکی، پایداری پایین در محیط مرطوب و فقدان خاصیت ضدباکتریایی دارد. در این پژوهش، با هدف ارتقاء کارایی این فیلم‌ها، از ترکیب هیالورونیک اسید با کیتوسان  و به‌کارگیری گلوتارآلدئید و تانیک اسید به‌عنوان عوامل پیوند عرضی استفاده شده است. نوآوری اصلی این تحقیق، استفاده هم‌زمان از دو عامل اصلاح شیمیایی است.مواد و روش‌ها: فیلم‌های کامپوزیتی هیالورونیک اسید/ کیتوسان با نسبت مشخص ترکیب و با استفاده از گلوتارآلدئید و تانیک اسید اصلاح شدند. آنالیز طیف‌سنجی مادون قرمز تبدیل فوریه برای بررسی برهم‌کنش‌های شیمیایی و ساختار پیوندها، آزمون کشش برای ارزیابی خواص مکانیکی و آزمون‌های زاویه تماس، جذب آب، سمیت سلولی و ضدباکتری، برای بررسی عملکرد زیستی فیلم‌ها انجام شد.یافته‌ها: طیف‌سنجی مادون قرمز تبدیل فوریه بیانگر تشکیل پیوندهای جدید و ساختار شبکه‌ای پایدار در اثر اصلاح شیمیایی بود. نمونه‌های اصلاح‌شده مدول یانگ 2-1/5 MPa، تنش کششی MPa 2 و زاویه تماس 45 درجه از خود نشان دادند که نشانگر افزایش استحکام و آب‌دوستی است. درصد جذب آب بالا (733 درصد) و بقای سلولی 85–90 درصد در غلظت بهینه گلوتارآلدئید، دلالت بر زیست‌سازگاری مطلوب دارد. با‌این‌حال، خواص ضدباکتریایی قابل‌توجهی مشاهده نشد.نتیجه‌گیری: نتایج این تحقیق نشان می‌دهد که استفاده ترکیبی از کیتوسان و عوامل پیوند عرضی گلوتارآلدئید و تانیک اسید، منجر به بهبود چشمگیر خواص مکانیکی، آب‌دوستی و زیست‌سازگاری فیلم‌های هیالورونیک اسید شده و آن‌ها را به گزینه‌ای مناسب برای کاربرد در زخم‌پوش‌ها تبدیل کرده است. برای افزایش اثربخشی ضدباکتریایی، پیشنهاد می‌شود از نانوذرات با خاصیت ضدباکتری استفاده شود.</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">هیالورونیک اسید</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">کیتوسان</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">اصلاح شیمیایی</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">فیلم‌های پلیمری</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">زخم‌پوش</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jame.iut.ac.ir/article_3616_78d69f40906679a976dc4d45cebffbe6.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>دانشگاه صنعتی اصفهان</PublisherName>
				<JournalTitle>مواد پیشرفته در مهندسی</JournalTitle>
				<Issn>2251-600X</Issn>
				<Volume>44</Volume>
				<Issue>4</Issue>
				<PubDate PubStatus="epublish">
					<Year>2025</Year>
					<Month>12</Month>
					<Day>22</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Preparation and Evaluation of Hydrogel Wound Dressings Containing Polyvinyl Alcohol, Chitosan, Flax, and Zinc Particles for Chronic Wound Healing</ArticleTitle>
<VernacularTitle>ساخت و ارزیابی زخم‌پوش هیدروژلی حاوی پلی‌وینیل الکل، کیتوسان، فلکس و ذرات روی برای ترمیم زخم‌های مزمن</VernacularTitle>
			<FirstPage>75</FirstPage>
			<LastPage>91</LastPage>
			<ELocationID EIdType="pii">3617</ELocationID>
			
<ELocationID EIdType="doi">10.47176/jame.44.4.1108</ELocationID>
			
			<Language>FA</Language>
<AuthorList>
<Author>
					<FirstName>اعظم</FirstName>
					<LastName>رستگار</LastName>
<Affiliation>گروه مهندسی مواد، دانشکده فنی و مهندسی گلپایگان، دانشگاه صنعتی اصفهان، گلپایگان، ایران</Affiliation>

</Author>
<Author>
					<FirstName>نرگس</FirstName>
					<LastName>جوهری</LastName>
<Affiliation>گروه مهندسی مواد، دانشکده فنی و مهندسی گلپایگان، دانشگاه صنعتی اصفهان، گلپایگان، ایران</Affiliation>
<Identifier Source="ORCID">0000-0003-0702-055X</Identifier>

</Author>
<Author>
					<FirstName>مریم</FirstName>
					<LastName>زارع</LastName>
<Affiliation>گروه علوم پایه، دانشکده فنی و مهندسی گلپایگان، دانشگاه صنعتی اصفهان، گلپایگان، ایران</Affiliation>
<Identifier Source="ORCID">0000-0002-1792-650X</Identifier>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2025</Year>
					<Month>02</Month>
					<Day>02</Day>
				</PubDate>
			</History>
		    <Abstract>Introduction and Objectives: This study aims to develop and evaluate hydrogel wound dressings based on polyvinyl alcohol, chitosan, flax extract, and zinc microparticles to enhance mechanical and biological properties.Materials and Methods: Four groups of hydrogels containing different concentrations of zinc microparticles (0, 2, 5, and 10 wt. %) were fabricated. The structural properties were examined using X-ray diffraction (XRD) and scanning electron microscopy (SEM). The mechanical properties, including tensile strength and elongation at break, were assessed. Additionally, biodegradability and water absorption tests were conducted to evaluate the hydrogel&#039;s biological performance.Results: Phase analysis indicated a transition from an amorphous to a semi-crystalline structure with increasing zinc microparticle concentration. Microscopic images confirmed the uniform distribution of zinc particles within the hydrogel matrix. Mechanical testing revealed that hydrogels with 2% and 5% zinc exhibited optimal properties, achieving tensile strengths of 20 MPa and 12.8 MPa and elongations of 24.3% and 2.5%, respectively. However, aggregation of zinc particles at 10% concentration reduced mechanical performance. Biodegradability tests showed that after 30 days, the hydrogel containing 5% zinc retained about 45% of its weight, whereas the zinc-free sample was fully degraded. Additionally, water absorption capacity improved, with 2% and 5% zinc-containing hydrogels achieving maximum absorption levels of approximately 780% and 800%, respectively.Conclusion: The optimized hydrogel wound dressings, incorporating zinc microparticles and bioactive materials, demonstrated enhanced mechanical and biological properties, making them a promising candidate for chronic wound treatment.</Abstract>
			<OtherAbstract Language="FA">مقدمه و اهداف: این پژوهش با هدف ساخت و ارزیابی هیدروژل‌های پوشاننده زخم بر پایه پلی‌وینیل الکل، کیتوسان، عصاره فلکس و میکروذرات روی، به‌منظور بهبود خواص مکانیکی و زیستی انجام شده است.مواد و روش‌ها: چهار گروه هیدروژلی با مقادیر مختلف میکروذرات روی (0، 2، 5 و 10 درصد وزنی)، تهیه شدند. ساختار هیدروژل‌ها با استفاده از پراش پرتو ایکس و میکروسکوپ الکترونی روبشی بررسی شد. همچنین، خواص مکانیکی شامل استحکام کششی و ازدیاد طول تا شکست، اندازه‌گیری شد. به‌علاوه، آزمون‌های زیست‌تخریب‌پذیری و جذب آب برای ارزیابی عملکرد زیستی هیدروژل انجام گرفت.یافته‌ها: بررسی فازی نشان داد که با افزایش درصد روی، ساختار هیدروژل‌ها از حالت آمورف به نیمه‌بلوری تغییر یافت. تصاویر میکروسکوپی، توزیع یکنواخت ذرات روی را در ساختار هیدروژلی تأیید کردند. آزمون‌های مکانیکی نشان دادند که نمونه‌های دارای 2 و 5 درصد روی بهترین عملکرد را داشتند، به‌طوری‌که استحکام کششی آن‌ها به‌ترتیب 20 و 12/8 مگاپاسکال و ازدیاد طول آن‌ها 24/3 و 2/5 درصد بود. درمقابل، تجمع ذرات روی در نمونه حاوی 10 درصد باعث کاهش این خواص شد. در آزمون زیست‌تخریب‌پذیری، نمونه دارای 5 درصد روی پس از 30 روز، حدود 45 درصد از وزن خود را حفظ کرد، درحالی‌که نمونه بدون روی کاملاً تخریب شد. همچنین، نمونه‌های دارای 2 و 5 درصد روی، بیشترین ظرفیت جذب آب را به‌ترتیب حدود 780 و 800 درصد نشان دادند.نتیجه‌گیری: هیدروژل‌های بهینه‌شده با ترکیب مناسب میکروذرات روی و مواد زیست‌فعال، خواص مکانیکی و زیستی بهتری از خود نشان دادند و به‌عنوان گزینه‌ای کارآمد برای درمان زخم‌های مزمن پیشنهاد می‌شوند.</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">روی</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">فلکس</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">کیتوسان</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">پلی‌وینیل الکل</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">زخم‌پوش</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jame.iut.ac.ir/article_3617_db68512896941514a089c37392f0683b.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>دانشگاه صنعتی اصفهان</PublisherName>
				<JournalTitle>مواد پیشرفته در مهندسی</JournalTitle>
				<Issn>2251-600X</Issn>
				<Volume>44</Volume>
				<Issue>4</Issue>
				<PubDate PubStatus="epublish">
					<Year>2025</Year>
					<Month>12</Month>
					<Day>22</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Measurement of the Dose Buildup Factor of Cesium Source Gamma Rays in Polymer Gel Containing Silver Nanoparticles in Different Concentrations</ArticleTitle>
<VernacularTitle>اندازه‌گیری ضریب انباشت دز پرتوهای گامای چشمه سزیم در ژل پلیمر حاوی نانوذرات نقره در غلظت‌های مختلف</VernacularTitle>
			<FirstPage>93</FirstPage>
			<LastPage>108</LastPage>
			<ELocationID EIdType="pii">3620</ELocationID>
			
<ELocationID EIdType="doi">10.47176/jame.44.4.1082</ELocationID>
			
			<Language>FA</Language>
<AuthorList>
<Author>
					<FirstName>عمار</FirstName>
					<LastName>واحدیان موحد</LastName>
<Affiliation>دانشکده فیزیک و مهندسی هسته ای، دانشگاه صنعتی شاهرود، شاهرود، کد پستی: 95161-36199، سمنان، ایران</Affiliation>
<Identifier Source="ORCID">0009-0007-8521-3919</Identifier>

</Author>
<Author>
					<FirstName>حسین</FirstName>
					<LastName>توکلی عنبران</LastName>
<Affiliation>دانشکده فیزیک و مهندسی هسته ای، دانشگاه صنعتی شاهرود، شاهرود، کد پستی: 95161-36199، سمنان، ایران</Affiliation>
<Identifier Source="ORCID">0000-0002-4705-3885</Identifier>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2024</Year>
					<Month>09</Month>
					<Day>16</Day>
				</PubDate>
			</History>
		    <Abstract>Introduction and Objectives: Nowadays, the use of ionizing radiation for the treatment of cancerous tumors is becoming increasingly sophisticated and evolving. In this study, the effect of silver nanoparticles on the dose buildup factor in PAGAS polymer gel—as a medium for holding silver nanoparticles—was investigated to evaluate their impact on radiotherapy and to develop suitable shielding materials that are lightweight, non-toxic, and flexible.Materials and Methods: The gamma ray source is a cesium source. Silver nanoparticles are in solution at a concentration of 1000 ppm. The dose buildup factor is measured by a NaI(TL) detector.Results: To investigate the effect of silver nanoparticles on the dose buildup factor, silver nanoparticles from a concentration of 0 to 8 mM were used in two samples of polymer gel, one at a height of 1 cm and the other at a height of 3 cm. From a concentration of 0 to 2 mM of silver nanoparticles, the dose buildup factor has an increasing trend, reaching a maximum value of 1.092 and 1.119 in samples with a height of 1 and 3 cm, respectively, and from a concentration of 2 to 8 mM of silver nanoparticles, the dose buildup factor has a decreasing trend. reaching a minimum value of 1.010 and 1.091 In samples with a height of 1 and 3 cm, respectively.Conclusion: The presence of silver nanoparticles in the polymer gel increases the interaction of the rays, which in cancerous tissue leads to further destruction of the cancerous tissue and in the shield causes further attenuation of the rays.</Abstract>
			<OtherAbstract Language="FA">مقدمه و اهداف: امروزه استفاده از پرتوهای یونیزان جهت درمان تومورهای سرطانی به‌طور مداوم در حال پیچیده‌ترشدن و دگرگون‌شدن هستند. در این تحقیق، اثر نانوذرات نقره در کمیت ضریب انباشت دز در ژل پلیمر PAGAS، به‌عنوان یک ماده نگهدارنده نانوذرات نقره، به‌منظور بررسی تاثیر نانوذرات نقره در پرتودرمانی و ساخت حفاظ مناسب (سبک، غیرسمی و انعطاف‌پذیر)، موردمطالعه قرار گرفته است. مواد و روش‌ها: منبع تولید پرتو گاما چشمه سزیم است. نانوذرات نقره به صورت محلول و با غلظت ppm 1000 است. ضریب انباشت دز توسط آشکارساز NaI(TL) اندازه‌گیری می‌شود. یافته‌ها: برای بررسی اثر نانوذرات نقره بر ضریب انباشت دز، از نانوذرات نقره از غلظت صفر تا هشت میلی‌مولار در دو نمونه از ژل پلیمر که یکی در ارتفاع یک سانتی‌متر و دیگری در ارتفاع  سه سانتی‌متر قرار دارد، استفاده شده است. از غلظت صفر تا دو میلی‌مولار نانوذرات نقره، ضریب انباشت دز روند افزایشی دارد؛ به‌طوری که در نمونه‌هایی با ارتفاع یک و سه سانتی‌متر، به ترتیب به بیشینه مقدار 1/092 و 1/119 می‌رسد و از غلظت دو تا هشت میلی‌مولار نانوذرات نقره، ضریب انباشت دز روند کاهشی دارد؛ به‌طوری که در نمونه‌هایی با ارتفاع یک و سه سانتی‌متر، به ترتیب به کمینه مقدار 1/010 و 1/091 می‌رسیم.  نتیجه‌گیری: حضور نانوذرات نقره در ژل پلیمر، باعث افزایش برهمکنش پرتوها می‌شود که این افزایش برهمکنش پرتوها، در بافت سرطانی منجر به تخریب بیشتر بافت سرطانی شده و در حفاظ باعث تضعیف بیشتر پرتوها می‌گردد.</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">حضور نانوذرات نقره در ژل پلیمر</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">باعث افزایش برهمکنش پرتوها می‌شود که این افزایش برهمکنش پرتوها</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">در بافت سرطانی منجر به تخریب بیشتر بافت سرطانی شده و در حفاظ باعث تضعیف بیشتر پرتوها می‌گردد</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jame.iut.ac.ir/article_3620_4baf54f36935058bcc696fcef3f4689b.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>دانشگاه صنعتی اصفهان</PublisherName>
				<JournalTitle>مواد پیشرفته در مهندسی</JournalTitle>
				<Issn>2251-600X</Issn>
				<Volume>44</Volume>
				<Issue>4</Issue>
				<PubDate PubStatus="epublish">
					<Year>2025</Year>
					<Month>12</Month>
					<Day>22</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Study of the Chemical Composition of Two-Component Bioactive Glass 50SiO2-50CaO on an Atomic Scale Using Molecular Dynamics Simulation for Bone Tissue Engineering Applications</ArticleTitle>
<VernacularTitle>مطالعه ترکیب شیمیایی شیشه زیست‌فعال دو جزیی 50SiO2-50CaO در مقیاس اتمی با استفاده از شبیه‌سازی دینامیک مولکولی به منظور استفاده در مهندسی بافت استخوان</VernacularTitle>
			<FirstPage>109</FirstPage>
			<LastPage>122</LastPage>
			<ELocationID EIdType="pii">3628</ELocationID>
			
<ELocationID EIdType="doi">10.47176/jame.44.4.1113</ELocationID>
			
			<Language>FA</Language>
<AuthorList>
<Author>
					<FirstName>امیرحسین</FirstName>
					<LastName>مغنیان</LastName>
<Affiliation>گروه مهندسی مواد و متالورژی، دانشکده فنی مهندسی، دانشگاه بین‌المللی امام خمینی (ره)، قزوین، ایران</Affiliation>
<Identifier Source="ORCID">0000-0001-9303-3351</Identifier>

</Author>
<Author>
					<FirstName>آرمان</FirstName>
					<LastName>طیبی</LastName>
<Affiliation>گروه مهندسی مواد و متالورژی، دانشکده فنی مهندسی، دانشگاه بین‌المللی امام خمینی (ره)، قزوین، ایران</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2025</Year>
					<Month>02</Month>
					<Day>18</Day>
				</PubDate>
			</History>
		    <Abstract>Introduction: Bioactive glasses, with their unique bioavailability, are a new approach to improve the healing process of bone injuries. In this study, the chemical composition of two-component 50SiO2–50CaO bioactive glass on an atomic scale using molecular dynamics simulation was examined.Materials and Methods: The chemical composition of bioactive glass 50SiO2-50CaO synthesized by melting and quenching method was simulated through the molecular dynamics method, lammps software and lennard-jones force field, and its properties on the atomic scale was examined.Results: According to the results of the study of the radial distribution function and the linkage distribution function, while confirming the presence of local order and irregularity of the composition at atomic intervals before and after 3 Å, the size of the atomic bonds for Si-O, Ca-O, and O-O bonds were reported 1.6, 2.45, and 2.65 (Å), respectively, and the results of the angular distribution function indicated the presence of a 109-degree angle between the O-Si-O bonds. The density of glass at ambient temperature was obtained to be 2.62 g/cc, and the penetration coefficient of SiO2 and CaO molecules at 1500 K was calculated to be 4  10-14 and 1.2  10-13 (m2/s), respectively. These values were obtained to be 16  10-13 and 2.2  10-12 (m2/s) at 2000 K, respectively. The stable release of silicon and calcium ions from the sample surface and an increase in the pH of the simulated body fluid (SBF) by 14 days of immersion were reported, along with a 41 percent increase in Q2.Conclusion: Using the lennard-jones force field leads to the prediction of the chemical composition characteristics of high-precision bioactive glass at different temperatures, reducing time and increasing the likelihood of success in the study, before conducting experimental methods.</Abstract>
			<OtherAbstract Language="FA">مقدمه و اهداف: شیشه‌های زیست‌فعال با داشتن قابلیت‌های زیستی منحصربه‌فرد، رویکردی نوین در بهبود روند ترمیم آسیب‌های استخوانی هستند. در این پژوهش، ترکیب شیمیایی شیشه زیست‌فعال دو جزیی 50SiO2-50CaO در مقیاس اتمی با استفاده از شبیه‌سازی دینامیک مولکولی بررسی گردید.مواد و روش‌ها: ترکیب شیمیایی شیشه زیست‌فعال 50SiO2-50CaO سنتزشده به روش ذوب و آبدهی، از طریق روش دینامیک مولکولی، استفاده از نرم‌افزار لمپس و میدان نیروی لنارد-جونز، شبیه‌سازی و ویژگی‌های ترکیب شیمیایی آن در مقیاس اتمی بررسی شد. یافته‌ها: طبق نتایج حاصل از بررسی تابع توزیع شعاعی و تابع توزیع پیوندی، ضمن تایید وجود نظم موضعی و بی‌نظمی ترکیب در فواصل اتمی قبل و بعد از Å 3، اندازه پیوندهای اتمی برای پیوندهای Ca-O ،Si-O و O-O به ترتیب 1/6، 2/45 و 2/26 Å گزارش گردید و نتایج حاصل از تابع توزیع زاویه‌ای، حاکی از وجود زاویه 109 درجه‌ای بین پیوندهای O-Si-O بود. چگالی شیشه در دمای محیط g/cc 2/62 و ضریب نفوذ مولکول‌های SiO2 و CaO در دمای K  1500 به ترتیب 14-10 × 4 و 13-10 × 1/2 m2/s 4 و در دمای K 2000 به ترتیب 13-10 × 16 و 12-10 × 2/2 13-10 m2/s محاسبه شد. رهایش پایدار یون‌های سیلیسیم و کلسیم از سطح نمونه و افزایش pH محلول شبیه‌سازی‌شده بدن تا روز 14 غوطه‌وری و نیز افزایش میزان Q2 تا 41 درصد گزارش گردید. نتیجه‌گیری: استفاده از میدان نیرو لنارد-جونز، منجر به پیش‌بینی ویژگی‌های ترکیب شیمیایی شیشه‌های زیست‌فعال با دقت بالا در دماهای مختلف، کاهش زمان و افزایش احتمال موفقیت در پژوهش، قبل از انجام روش‌های تجربی می‌گردد.</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">شیشه‌ زیست‌فعال دو جزیی SiO2-CaO</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">شبیه‌سازی دینامیک مولکولی</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">میدان نیروی لنارد-جونز</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">ضریب نفوذ</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">مهندسی بافت استخوان</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jame.iut.ac.ir/article_3628_3e524bf740dc8cfd3f49bd3e96daee6e.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>دانشگاه صنعتی اصفهان</PublisherName>
				<JournalTitle>مواد پیشرفته در مهندسی</JournalTitle>
				<Issn>2251-600X</Issn>
				<Volume>44</Volume>
				<Issue>4</Issue>
				<PubDate PubStatus="epublish">
					<Year>2025</Year>
					<Month>12</Month>
					<Day>22</Day>
				</PubDate>
			</Journal>
<ArticleTitle>The Effect of Blackening Treatment on the Corrosion Behavior of Ni-P-CNT Nanocomposite Coatings</ArticleTitle>
<VernacularTitle>تأثیر عملیات سیاه‌کاری بر رفتار خوردگی پوشش‌های نانوکامپوزیتی Ni-P-CNT</VernacularTitle>
			<FirstPage>123</FirstPage>
			<LastPage>138</LastPage>
			<ELocationID EIdType="pii">3645</ELocationID>
			
<ELocationID EIdType="doi">10.47176/jame.44.4.1120</ELocationID>
			
			<Language>FA</Language>
<AuthorList>
<Author>
					<FirstName>فریده</FirstName>
					<LastName>طباطبائی</LastName>
<Affiliation>دانشکده مهندسی مواد موسسه آموزش عالی نقش جهان، بهارستان، اصفهان</Affiliation>
<Identifier Source="ORCID">0000-0001-7812-348X</Identifier>

</Author>
<Author>
					<FirstName>شهرام</FirstName>
					<LastName>علیرضائی</LastName>
<Affiliation>دانشکده مهندسی مواد، دانشگاه صنعتی مالک اشتر، شاهین شهر، اصفهان</Affiliation>
<Identifier Source="ORCID">0009-0001-3704-1645</Identifier>

</Author>
<Author>
					<FirstName>مهدی</FirstName>
					<LastName>باقری</LastName>
<Affiliation>دانشکده مهندسی مواد موسسه آموزش عالی نقش جهان، بهارستان، اصفهان</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2025</Year>
					<Month>04</Month>
					<Day>05</Day>
				</PubDate>
			</History>
		    <Abstract>Introduction and objectives: In this research, carbon nanotubes (CNTs) were used to optimize the properties of Ni-P electroless coating in optical applications and the effect of CNT content on the corrosion behavior of Ni-P-CNT composite coating was investigated.Materials and methods: The coatings were blackened in nitric acid solution after electroless coating deposition. The morphology and elemental analysis of the coatings were examined using scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS), respectively. Also, the electrochemical tests such as potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) were employed to investigate the corrosion behavior.Results: The results declared that increasing CNT in the plating bath from 0 to 2 g/l led to increase in CNT content in the composite coating, while the co-deposition of CNT was decreased in greater values. It was also found that the blackened composite coating containing 1.5 g/l CNT had the highest corrosion resistance among all the composite coatings. This behavior can be the result of the optimum co-deposition of carbon nanotubes in Ni-P matrix and subsequently lower amounts of defects after blackening process.Conclusions: In this research, the effect of co-deposition of carbon nanotubes on the corrosion behavior was studied. The results indicated that the corrosion resistance of blackened composite coating was improved in an optimum content ~1.5 g/l of carbon nanotube in the Ni-P matrix.</Abstract>
			<OtherAbstract Language="FA">مقدمه و اهداف: در این پژوهش با هدف بهبود خواص پوشش الکترولس Ni-P، به ویژه در کاربردهای اپتیکی، از نانولوله‌های کربنی استفاده شده و تأثیر درصد نانولوله کربنی، بر رفتار خوردگی پوشش کامپوزیتی  Ni-P-CNT مورد بررسی قرار گرفته است.مواد و روش‌ها: پس از فرایند پوشش‌دهی الکترولس، پوشش‌ها در محلول اسید نیتریک سیاه‌کاری شدند. مورفولوژی و آنالیز عنصری پوشش‌ها، به ترتیب توسط میکروسکوپ الکترونی روبشی و طیف‌سنجی توزیع انرژی ارزیابی شد. همچنین آزمون‌های الکتروشیمیایی نظیر پلاریزاسیون پتانسیودینامیک و طیف‌سنجی امپدانس الکتروشیمیایی جهت بررسی رفتار خوردگی مورد استفاده قرار گرفتند.یافته‌ها: نتایج نشان دادند که با افزایش درصد نانولوله کربنی در حمام از 0 تا 2 گرم بر لیتر، میزان هم‌رسوبی نانولوله کربنی در پوشش افزایش‌ یافته و در مقادیر بالاتر مشارکت نانولوله کربنی در پوشش، روند کاهشی داشته است. همچنین مشاهده شد که پوشش کامپوزیتی سیاه‌کاری‌شده حاوی 1/5 گرم بر لیتر نانولوله کربنی ، بیشترین میزان مقاومت به خوردگی را در بین تمامی پوشش‌های کامپوزیتی داشته است. این رفتار بعلت هم‌رسوبی بهینه نانولوله‌های کربنی در زمینه Ni-P و متعاقباً درصد عیوب سطحی کمتر پس از فرایند سیاه‌کاری بوده است.نتیجه‌گیری: در این پژوهش، تاثیر هم‌رسوبی نانولوله‌های کربنی بر رفتار خوردگی ارزیابی شد. نتایج نشان‌دهنده بهبود رفتار خوردگی پوشش کامپوزیتی سیاه‌کاری‌شده، در مقدار بهینه 1/5 گرم بر لیتر نانولوله کربنی، در زمینه پوشش Ni-P بوده است.</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">الکترولس</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">نانولوله کربنی</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">سیاه‌کاری</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">مقاومت به خوردگی</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">کامپوزیت</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jame.iut.ac.ir/article_3645_d0aa518d4d3bfc721aa0b8ab4ef32269.pdf</ArchiveCopySource>
</Article>
</ArticleSet>
