Volume 16, Issue 1 (7-1997)                   jame 1997, 16(1): 41-49 | Back to browse issues page

XML Persian Abstract Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

A. Monshi. Method of Quantitative Phase Analysis by XRD Without Reference Material. jame. 1997; 16 (1) :41-49
URL: http://jame.iut.ac.ir/article-1-102-en.html
Abstract:   (4483 Views)
This new method which is worked out in Isfahan University of Technology, makes it possible to analyze the phases quantitatively in minerals and powdered materials by X Ray Diffraction and without any reference material. To identify n unknown phases, n different combinations of phases, from fine and coarse fractions, or etc., must be obtained. Amorphous phases should not exist. Intensity ratios of selected peaks of different phases to the suitable peak of added substances are plotted against the weight ratio of unknown material to substances. The phase is used to eliminate the effect of absorption in measurements. After detecting the slopes of linear plots which pass through the origin, n equations are obtained which are solved for n unknown coefficients. The quantitative phase analysis is subsequently performed in all n samples. If reference materials are available for some phases, n is reduced. The method is to analyze three phases MgO, CaO, Ca(OH)2 with substance CaF2, in magnesite – dolomite, partially hydrated refractories.
Keywords: -
Full-Text [PDF 501 kb]   (1552 Downloads)    
Type of Study: Research | Subject: General
Received: 2014/10/25 | Published: 1997/07/15

Add your comments about this article : Your username or Email:
CAPTCHA

© 2021 CC BY-NC 4.0 | Journal of Advanced Materials in Engineering (Esteghlal)

Designed & Developed by : Yektaweb