Volume 36, Issue 1 (Journal of Advanced Materials-Spring 2017)                   jame 2017, 36(1): 121-130 | Back to browse issues page

DOI: 10.18869/acadpub.jame.36.1.121

XML Persian Abstract Print

Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Amiri Moghaddam A, kalantar M. In-situ Synthesis of WC-Co Composite in WO3- Co3O4- C System by Carbothermic Reduction Method . jame. 2017; 36 (1) :121-130
URL: http://jame.iut.ac.ir/article-1-686-en.html

Department of Metallurgical Engineering, Yazd University, Yazd, Iran
Abstract:   (1057 Views)

The aim of this investigation is obtaining WC-Co composite powder from WO3 and Co3O4 by in-situ and carbothermic reduction method using activated carbon as a reducing agent. In this study, cobalt and tungsten oxide powders with 17% carbon (30% more than stoichiometric value) were mixed by ball-milling under atmosphere of argon for 20 hours. Differential Thermal Analysis (DTA) and Thermal Gravimetric Analysis (TGA) results on powder mixture show complete reducing of oxides at 1050°C and forming cobalt carbide and tungsten carbide. Compact samples underwent carbothermic reduction at 1050 °C for different times of 1, 2 and 4 hours with protective layer of alumina and carbon powder mixture with ratio of 1:1. Based on X-Ray Diffraction (XRD) analyses, the best holding time in furnace is 4 hours, in which tungsten reduction and carbonization is completed. XRD evaluation of reduced compacted samples in three conditions of atmosphere protective layer of alumina and carbon powder mixture with ratio of 1:1, protective foil of refractory steel and argon, shows that unreduced oxides and extra phases are present in argon atmosphere and protective foil of steel but not in alumina and carbon mixture layer. The measurement results of physical and mechanical properties on the sintered composite sample in heating rate of 5 °C /min to temperature 1500 °C and the holding time of 2 hours under a shielding layer of alumina and carbon shows obtaining the optimal properties (Pr=80%, KIC=8.1 MPa , MHV=15.67GPa) comparable to that of advanced and costly methods.

Full-Text [PDF 478 kb]   (220 Downloads)    
Type of Study: Research | Subject: Composites
Received: 2015/09/23 | Accepted: 2016/06/26 | Published: 2017/06/20

Add your comments about this article : Your username or Email:
Write the security code in the box

Send email to the article author

© 2015 All Rights Reserved | Journal of Advanced Materials in Engineering (Esteghlal)

Designed & Developed by : Yektaweb

تحت نظارت وف بومی آسپا-وف