Volume 34, Issue 3 (Journal of Advanced Materials-fall 2015)                   jame 2015, 34(3): 59-67 | Back to browse issues page

XML Persian Abstract Print

Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Sharifi N. Transparency Effect of Electrolyte on Light Back-Scattering in Dye-Sensitized Solar Cells. jame. 2015; 34 (3) :59-67
URL: http://jame.iut.ac.ir/article-1-718-en.html
Institute of Nanoscience and Nanotechnology, University of Kashan, Kashan, Iran
Abstract:   (3624 Views)

Conventionally, a film of TiO2 particles of ~300 nm size is employed in DSCs as the back reflector film to enhance the light harvesting. In this study, two electrolytes with different transparencies, iodide-based and cobalt-based electrolytes, were used to investigate the transparency effect of electrolytes on light back-scattering from back scattering layer and also to study its effect on the performance of DSCs. The use of cobalt-based electrolyte is recommended from the view point of optical properties as due to the light absorption in electrolytes, the current density losses are 2.9mA/cm2 and 4.2 mA/cm2 in cobalt- and iodide-based electrolytes, respectively, and the transmission of 100% is observed for cobalt-based electrolyte in 500-600 nm in spite of iodide-based electrolyte. Use of light back-scattering layer, unlike iodide-based cell, causes external quantum efficiency in cobalt-base cell to increase for the wavelengths lower than 350 nm since cobalt-base electrolyte has transparency in this region. In addition, optical calculations demonstrate that in the range 400-500 nm, in which dye has a noticeable absorption, absorption loss is 40% and 30% for iodide- and cobalt-based electrolytes, respectively.

Full-Text [PDF 1212 kb]   (814 Downloads)    
Type of Study: Research | Subject: General
Received: 2015/12/16 | Accepted: 2015/12/16 | Published: 2015/12/16

Add your comments about this article : Your username or Email:

Send email to the article author

© 2019 All Rights Reserved | Journal of Advanced Materials in Engineering (Esteghlal)

Designed & Developed by : Yektaweb