Volume 35, Issue 1 (Journal of Advanced Materials-Spring 2016)                   jame 2016, 35(1): 71-81 | Back to browse issues page

XML Persian Abstract Print

Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Rajaei V, Raeissi K, Shamanian M, Rashtchi H. Electrodeposition and Characterization of Nanocrystalline Nickel- Molybdenum Alloy . jame. 2016; 35 (1) :71-81
URL: http://jame.iut.ac.ir/article-1-787-en.html
Department of Materials Engineering, Isfahan University of Technology, Isfahan, Iran , v.rajaei@ma.iut.ac.ir
Abstract:   (9849 Views)

In this study, Ni-Mo nanocrystalline alloys were prepared on steel substrates by electrodeposition method from citrate-ammonia bath by applying current densities 30, 60 and 100 mA/cm2. Results indicated that the obtained coatings were uniform and compact. Moreover, molybdenum content in the alloy and current efficiency decreased with increasing electrodeposition current density. X-ray diffraction analyses indicated that all coatings were composed of face-centered cubic solid solution of molybdenum in nickel with grain size of 9-5 nanometer. Moreover, the most intensive plane in X-ray diffragtogram was (111). On the othe hand, roughness measurements indicated that surface roughness escalated with increasing current density. Corrosion behavior study showed decrease in corrosion current density of substrate with applying Ni-Mo alloy coatings. In addition, corrosion current density reduced with increasing molybdenum content of the coating and the minimum amount was related to the coating with 13 atomic percent molybdenum.

Full-Text [PDF 1243 kb]   (1631 Downloads)    
Type of Study: Research | Subject: General
Received: 2016/06/14 | Accepted: 2016/06/14 | Published: 2016/06/14

Add your comments about this article : Your username or Email:

Send email to the article author

Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

© 2022 CC BY-NC 4.0 | Journal of Advanced Materials in Engineering (Esteghlal)

Designed & Developed by : Yektaweb