Volume 37, Issue 1 (Journal of Advanced Materials-Spring 2018)                   jame 2018, 37(1): 37-44 | Back to browse issues page


XML Persian Abstract Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Tavoosi M, Arjmand S. The Formation of Al3Ti Intermetallic compound at the junction interface of Titanium-Aluminum diffusional Coupling by Means of Diffusional Annealing Process. jame. 2018; 37 (1) :37-44
URL: http://jame.iut.ac.ir/article-1-865-en.html
Department of Materials Engineering, Malek-Ashtar University of Technology (MUT), Shahin-Shahr, Isfahan, Iran.
Abstract:   (1201 Views)

In this study, the formation of the Al3Ti intermetallic compound at the junction interface of aluminum-titanium was investigated during deposition and annealing. The results illustrated that during the deposition process, one thin layer of Ti3Al2 intermetallic compound was created at the junction interface. During the annealing at 550 °C, this layer was transformed to the  Al3Ti intermetallic phase and the layer growth occurred. By performing annealing at higher temperatures, the growth rate of Al3Ti intermetallic layer was increased; at the same time, the formation of Kirkendall cavities and  coupling in the cavities and fragmentation of diffusional coupling from the junction with aluminum were observed

Full-Text [PDF 646 kb]   (130 Downloads)    
Type of Study: Research | Subject: Advanced Synthesis and production processes
Received: 2017/01/8 | Accepted: 2017/12/4 | Published: 2018/05/30

Add your comments about this article : Your username or Email:
CAPTCHA code

Send email to the article author


© 2018 All Rights Reserved | Journal of Advanced Materials in Engineering (Esteghlal)

Designed & Developed by : Yektaweb