A. Abdollahi, Investigation of Molybdenum Disilicide, Boron Carbide and Silicon Carbide Particles on Flexural Strength and Pressureless Sintering Behavior of ZrB2-HfB2 Ultra High Temperature Composite [Volume 33, Issue 2, 2015, Pages 85-97]
A. Doostmohamadi, Synthesis and Characterization of Glass IonomerâForsterite Nanocomposites and Study of the Effect of Adding Forsterite Nanoparticles on Mechanical Properties and Bioactivity [Volume 33, Issue 3, 2015, Pages 21-35]
Akbar Khodaparast Haghi, The Development of Textile Based Microstrip Antenna Using Inkjet Printing [Volume 33, Issue 3, 2015, Pages 61-78]
Ali Ghasemi, Effect of Mechanical Milling Treatment and Reaction Temperature on the Fabrication of Silicon Nitride [Volume 33, Issue 3, 2015, Pages 51-59]
A. Mashreghi, Fabrication and Characterization of Nickel Ferrite Based Inert Anodes for Aluminum Electrolysis [Volume 33, Issue 3, 2015, Pages 125-140]
A.Mirhabibi, Evaluating Mechanical Properties of Two Directional Carbon-Carbon Composites Based on Texture of Wood [Volume 33, Issue 1, 2014, Pages 1-9]
A. Sadeghzadeh Attar, Synthesis and Evaluation of Corrosion Behavior of Al2O3/MgO/TiO2 Mixed-Metal Oxides Coating by Sol-Gel Method on Al Substrate [Volume 33, Issue 2, 2015, Pages 17-30]
A. Saidi, Effect of Milling Time on TixAly/Al2O3 Ceramic Matrix Nanocomposite Synthesis Using the Mechanochemical Method [Volume 33, Issue 2, 2015, Pages 55-64]
B
B. Eftekhari Yekta, Survey on the Influence of Temperature and Holding Time on Synthesis of Hercynite by Molten Salt Method [Volume 33, Issue 2, 2015, Pages 75-84]
D
D. Ghasemi, Characterization and Formation Mechanism of Aluminum Based Nanocomposites Reinforced with TiO2 Particles by Mechanical Milling [Volume 33, Issue 2, 2015, Pages 99-106]
F
F. Agend, Investigation of Sensory Properties of Nanostructure Tin Oxide Layers Deposited by Thermal Evaporation and Sputtering Methods Compared to Ethanol [Volume 33, Issue 2, 2015, Pages 65-74]
Fatemeh Mohtaram, The Development of Textile Based Microstrip Antenna Using Inkjet Printing [Volume 33, Issue 3, 2015, Pages 61-78]
F. Karimzadeh., Analyzing Mechanical Properties of Transient Liquid Phase Bonding of Al2O3p/Al Nanocomposite Using Copper Interlayer [Volume 33, Issue 1, 2014, Pages 63-76]
F. Mohammadi, Effect of MgCl2 Addition on the Kinetics of MA Spinel Formation [Volume 33, Issue 1, 2014, Pages 93-103]
F. Shirani, Synthesis and Characterization of Glass IonomerâForsterite Nanocomposites and Study of the Effect of Adding Forsterite Nanoparticles on Mechanical Properties and Bioactivity [Volume 33, Issue 3, 2015, Pages 21-35]
F.S. Sayyedan, Synthesis and Characterization of Glass IonomerâForsterite Nanocomposites and Study of the Effect of Adding Forsterite Nanoparticles on Mechanical Properties and Bioactivity [Volume 33, Issue 3, 2015, Pages 21-35]
G
G. H. Borhani, Phase Evaluation of Alloyed and Composed Molybdenum disilicide by Al and TiC [Volume 33, Issue 1, 2014, Pages 21-31]
Gholamreza Baghersalimi, The Development of Textile Based Microstrip Antenna Using Inkjet Printing [Volume 33, Issue 3, 2015, Pages 61-78]
H
H. Abbaszadeh, The Effect of Different Activation Methods on Microstructure, Hardness and Densification Behavior of Sintered Mo Powder [Volume 33, Issue 1, 2014, Pages 11-20]
H. Abdizadeh, Synthesis of Nano Powder Zirconium Carbide (ZrC) Using Self-Propagating High Temperature [Volume 33, Issue 3, 2015, Pages 79-89]
H. Baharvandee, Synthesis of Nano Powder Zirconium Carbide (ZrC) Using Self-Propagating High Temperature [Volume 33, Issue 3, 2015, Pages 79-89]
H. Edris, Synthesis and Characterization of Glass IonomerâForsterite Nanocomposites and Study of the Effect of Adding Forsterite Nanoparticles on Mechanical Properties and Bioactivity [Volume 33, Issue 3, 2015, Pages 21-35]
H. Ghassai, Investigation of Key Factors on Manufacture of Fused Silica Parts by Gel-Casting Method [Volume 33, Issue 1, 2014, Pages 117-126]
H. R. Jahedmotlagh, Effect of Equal Channel Angular Pressing on Microstructure of AM30 Magnesium Alloy [Volume 33, Issue 3, 2015, Pages 13-20]
H.R. SalimiJazi, Analyzing Mechanical Properties of Transient Liquid Phase Bonding of Al2O3p/Al Nanocomposite Using Copper Interlayer [Volume 33, Issue 1, 2014, Pages 63-76]
H. Salami Jazi, Evaluation of Electric Current Effect on the Microstructure and Wear Behavior of Cast Al Base Alloys [Volume 33, Issue 1, 2014, Pages 77-92]
H. Sarpoolaki, Investigation of Key Factors on Manufacture of Fused Silica Parts by Gel-Casting Method [Volume 33, Issue 1, 2014, Pages 117-126]
K
K. Janghorban, Evaluating the Effect of Yittria Addition on the Mullite-Zirconia Composites Manufactured by Slip Casting Method [Volume 33, Issue 1, 2014, Pages 49-61]
K.Janghorban, Erratum to: Effect of Yittria Addition on the Mullite-Zirconia Composites Manufactured by Slip Casting Method [Volume 33, Issue 2, 2015, Pages 121-122]
K. Raeissi, The Influence of Anodising Voltage on Tribocorrosion Behavior of Anodized Ti-6Al-4V Alloy [Volume 33, Issue 3, 2015, Pages 37-49]
K. Raeissi, The Influence of Anodising Voltage on Tribocorrosion Behavior of Anodized Ti-6Al-4V Alloy [Volume 33, Issue 3, 2015, Pages 37-49]
K. Sheybani, A Kinetic Study on the Carbothermic Reduction of Molybdenite in the Presence of Sodium Carbonate [Volume 33, Issue 2, 2015, Pages 107-120]
K. Zangeneh-madar, The Effect of Different Activation Methods on Microstructure, Hardness and Densification Behavior of Sintered Mo Powder [Volume 33, Issue 1, 2014, Pages 11-20]
L
L. Akbarshahi, Investigation of Key Factors on Manufacture of Fused Silica Parts by Gel-Casting Method [Volume 33, Issue 1, 2014, Pages 117-126]
M
M.A. Golozar, The Influence of Anodising Voltage on Tribocorrosion Behavior of Anodized Ti-6Al-4V Alloy [Volume 33, Issue 3, 2015, Pages 37-49]
M.A. Golozar, The Influence of Anodising Voltage on Tribocorrosion Behavior of Anodized Ti-6Al-4V Alloy [Volume 33, Issue 3, 2015, Pages 37-49]
M. Ahmadi, Effect of Carbon Nanotube Content on Cell Morphology of Nanocomposite Microcellular PC/EPDM Foams [Volume 33, Issue 2, 2015, Pages 31-42]
M. Ahmadi, Effect of Carbon Nanotube Content on Cell Morphology of Nanocomposite Microcellular PC/EPDM Foams [Volume 33, Issue 2, 2015, Pages 31-42]
M. Alizadeh, An Investigation of the Effects of Cold Rolling and Annealing on the Corrosion and Tensile Behaviors of Al/Steel Multilayer Composite [Volume 33, Issue 2, 2015, Pages 1-15]
M. Alizadeh, Synthesis and Evaluation of Corrosion Behavior of Al2O3/MgO/TiO2 Mixed-Metal Oxides Coating by Sol-Gel Method on Al Substrate [Volume 33, Issue 2, 2015, Pages 17-30]
M. Daneshmand, Effect of Cellular Structure of A356-10 vol.%SiC Composite Aluminum Foam on Progressive Quasi-Static Axial Buckling Behavior of Brass Crush-Box [Volume 33, Issue 3, 2015, Pages 105-124]
M. Ehteshamzadeh, An Investigation of the Effects of Cold Rolling and Annealing on the Corrosion and Tensile Behaviors of Al/Steel Multilayer Composite [Volume 33, Issue 2, 2015, Pages 1-15]
M. Esmaeeli, Evaluating Mechanical Properties of Two Directional Carbon-Carbon Composites Based on Texture of Wood [Volume 33, Issue 1, 2014, Pages 1-9]
M.Golzar, Ultimate Strain and Anisotropic Behavior in Corrugated Composites [Volume 33, Issue 1, 2014, Pages 33-48]
M.H. Abbasi, A Kinetic Study on the Carbothermic Reduction of Molybdenite in the Presence of Sodium Carbonate [Volume 33, Issue 2, 2015, Pages 107-120]
M.H. Fathi, Synthesis and Characterization of Glass IonomerâForsterite Nanocomposites and Study of the Effect of Adding Forsterite Nanoparticles on Mechanical Properties and Bioactivity [Volume 33, Issue 3, 2015, Pages 21-35]
M. H. Ghezel ayagh, Investigation of Sensory Properties of Nanostructure Tin Oxide Layers Deposited by Thermal Evaporation and Sputtering Methods Compared to Ethanol [Volume 33, Issue 2, 2015, Pages 65-74]
M. Kalantar, Fabrication and Characterization of Nickel Ferrite Based Inert Anodes for Aluminum Electrolysis [Volume 33, Issue 3, 2015, Pages 125-140]
M. Mashhadi, Investigation of Molybdenum Disilicide, Boron Carbide and Silicon Carbide Particles on Flexural Strength and Pressureless Sintering Behavior of ZrB2-HfB2 Ultra High Temperature Composite [Volume 33, Issue 2, 2015, Pages 85-97]
M. Mosallaeepour, Fabrication and Characterization of Nickel Ferrite Based Inert Anodes for Aluminum Electrolysis [Volume 33, Issue 3, 2015, Pages 125-140]
M. Rahmani, Evaluating the Effect of Yittria Addition on the Mullite-Zirconia Composites Manufactured by Slip Casting Method [Volume 33, Issue 1, 2014, Pages 49-61]
M. Rahmani, Erratum to: Effect of Yittria Addition on the Mullite-Zirconia Composites Manufactured by Slip Casting Method [Volume 33, Issue 2, 2015, Pages 121-122]
M.R. Garsivaz jazi, The Influence of Anodising Voltage on Tribocorrosion Behavior of Anodized Ti-6Al-4V Alloy [Volume 33, Issue 3, 2015, Pages 37-49]
M.R. Nilforushan, Effect of MgCl2 Addition on the Kinetics of MA Spinel Formation [Volume 33, Issue 1, 2014, Pages 93-103]
M.R. Toroghinejad, Analyzing Mechanical Properties of Transient Liquid Phase Bonding of Al2O3p/Al Nanocomposite Using Copper Interlayer [Volume 33, Issue 1, 2014, Pages 63-76]
M. Sedighi, Effect of Equal Channel Angular Pressing on Microstructure of AM30 Magnesium Alloy [Volume 33, Issue 3, 2015, Pages 13-20]
M. Shamanian, A Kinetic Study on the Carbothermic Reduction of Molybdenite in the Presence of Sodium Carbonate [Volume 33, Issue 2, 2015, Pages 107-120]
M. Soltanieh, Survey on the Influence of Temperature and Holding Time on Synthesis of Hercynite by Molten Salt Method [Volume 33, Issue 2, 2015, Pages 75-84]
M. Talebian, An Investigation of the Effects of Cold Rolling and Annealing on the Corrosion and Tensile Behaviors of Al/Steel Multilayer Composite [Volume 33, Issue 2, 2015, Pages 1-15]
M. Tehrani Dehkordi, Effect of Different Parameters on Charpy Impact Properties of Quasi-Isotropic Epoxy Composites Reinforced with Basalt and Glass Fibers [Volume 33, Issue 3, 2015, Pages 91-103]
M. Yousefi, Structural and Magnetic Characterization of (Fe65-Co35)100-xSix Alloy Obtained by Mechanical Alloying [Volume 33, Issue 1, 2014, Pages 105-116]
P
P.Ghabezi, Ultimate Strain and Anisotropic Behavior in Corrugated Composites [Volume 33, Issue 1, 2014, Pages 33-48]
P. Safaie, Phase Evaluation of Alloyed and Composed Molybdenum disilicide by Al and TiC [Volume 33, Issue 1, 2014, Pages 21-31]
P. Zarrabian, Fabrication and Characterization of Nickel Ferrite Based Inert Anodes for Aluminum Electrolysis [Volume 33, Issue 3, 2015, Pages 125-140]
R
R. Emadi, Evaluation of Electric Current Effect on the Microstructure and Wear Behavior of Cast Al Base Alloys [Volume 33, Issue 1, 2014, Pages 77-92]
R. Jahadi Naeini, Effect of Equal Channel Angular Pressing on Microstructure of AM30 Magnesium Alloy [Volume 33, Issue 3, 2015, Pages 13-20]
R. Nategi Jahromi, Effect of Different Parameters on Charpy Impact Properties of Quasi-Isotropic Epoxy Composites Reinforced with Basalt and Glass Fibers [Volume 33, Issue 3, 2015, Pages 91-103]
R. Tajalli, Synthesis of Nano Powder Zirconium Carbide (ZrC) Using Self-Propagating High Temperature [Volume 33, Issue 3, 2015, Pages 79-89]
S
Saeed Reza Bakhshi, Effect of Mechanical Milling Treatment and Reaction Temperature on the Fabrication of Silicon Nitride [Volume 33, Issue 3, 2015, Pages 51-59]
Sarpoolaky, Hosein Survey on the Influence of Temperature and Holding Time on Synthesis of Hercynite by Molten Salt Method [Volume 33, Issue 2, 2015, Pages 75-84]
S. Borji, The Effect of Different Activation Methods on Microstructure, Hardness and Densification Behavior of Sintered Mo Powder [Volume 33, Issue 1, 2014, Pages 11-20]
S. H. Bahrami, Effect of Different Parameters on Charpy Impact Properties of Quasi-Isotropic Epoxy Composites Reinforced with Basalt and Glass Fibers [Volume 33, Issue 3, 2015, Pages 91-103]
Sh. Ebrahimi, Effect of Carbon Nanotube Content on Cell Morphology of Nanocomposite Microcellular PC/EPDM Foams [Volume 33, Issue 2, 2015, Pages 31-42]
SH. Masoumi, Survey on the Influence of Temperature and Holding Time on Synthesis of Hercynite by Molten Salt Method [Volume 33, Issue 2, 2015, Pages 75-84]
Sh. Seyyedin, Investigation of Sensory Properties of Nanostructure Tin Oxide Layers Deposited by Thermal Evaporation and Sputtering Methods Compared to Ethanol [Volume 33, Issue 2, 2015, Pages 65-74]
S. Katiraei, Mechanical Behavior of Porous Ni-Ti Alloy Produced by Bulk Combustion Synthesis Method for Bone Surgery [Volume 33, Issue 2, 2015, Pages 43-54]
S.M.H. Mirbagheri, Effect of Cellular Structure of A356-10 vol.%SiC Composite Aluminum Foam on Progressive Quasi-Static Axial Buckling Behavior of Brass Crush-Box [Volume 33, Issue 3, 2015, Pages 105-124]
S. M. Hosseini-Golgoo, Investigation of Sensory Properties of Nanostructure Tin Oxide Layers Deposited by Thermal Evaporation and Sputtering Methods Compared to Ethanol [Volume 33, Issue 2, 2015, Pages 65-74]
S. Mirtalebi, Characterization and Formation Mechanism of Aluminum Based Nanocomposites Reinforced with TiO2 Particles by Mechanical Milling [Volume 33, Issue 2, 2015, Pages 99-106]
S. Otroj, Evaluating the Effect of Yittria Addition on the Mullite-Zirconia Composites Manufactured by Slip Casting Method [Volume 33, Issue 1, 2014, Pages 49-61]
S. Otroj, Effect of MgCl2 Addition on the Kinetics of MA Spinel Formation [Volume 33, Issue 1, 2014, Pages 93-103]
S. Otroj, Erratum to: Effect of Yittria Addition on the Mullite-Zirconia Composites Manufactured by Slip Casting Method [Volume 33, Issue 2, 2015, Pages 121-122]
S. R. Bakhshi, Phase Evaluation of Alloyed and Composed Molybdenum disilicide by Al and TiC [Volume 33, Issue 1, 2014, Pages 21-31]
S. Seyyedin, The Effect of Different Activation Methods on Microstructure, Hardness and Densification Behavior of Sintered Mo Powder [Volume 33, Issue 1, 2014, Pages 11-20]
S. Sharafi, Structural and Magnetic Characterization of (Fe65-Co35)100-xSix Alloy Obtained by Mechanical Alloying [Volume 33, Issue 1, 2014, Pages 105-116]
S.S. Sayyedain, Analyzing Mechanical Properties of Transient Liquid Phase Bonding of Al2O3p/Al Nanocomposite Using Copper Interlayer [Volume 33, Issue 1, 2014, Pages 63-76]
V
Vahid Mottaghitalab, The Development of Textile Based Microstrip Antenna Using Inkjet Printing [Volume 33, Issue 3, 2015, Pages 61-78]
V. Omrani Dizajyekan, Evaluation of Electric Current Effect on the Microstructure and Wear Behavior of Cast Al Base Alloys [Volume 33, Issue 1, 2014, Pages 77-92]
V.S., Mortazavi, Synthesis and Characterization of Glass IonomerâForsterite Nanocomposites and Study of the Effect of Adding Forsterite Nanoparticles on Mechanical Properties and Bioactivity [Volume 33, Issue 3, 2015, Pages 21-35]
Y
Y. Tabatabaie, Effect of Cellular Structure of A356-10 vol.%SiC Composite Aluminum Foam on Progressive Quasi-Static Axial Buckling Behavior of Brass Crush-Box [Volume 33, Issue 3, 2015, Pages 105-124]
Z
Zahra Omidi, Effect of Mechanical Milling Treatment and Reaction Temperature on the Fabrication of Silicon Nitride [Volume 33, Issue 3, 2015, Pages 51-59]
Z. Ansari, Synthesis and Evaluation of Corrosion Behavior of Al2O3/MgO/TiO2 Mixed-Metal Oxides Coating by Sol-Gel Method on Al Substrate [Volume 33, Issue 2, 2015, Pages 17-30]
Z. Asghary, The Effect of Different Activation Methods on Microstructure, Hardness and Densification Behavior of Sintered Mo Powder [Volume 33, Issue 1, 2014, Pages 11-20]
Z. Nasiri, Investigation of Molybdenum Disilicide, Boron Carbide and Silicon Carbide Particles on Flexural Strength and Pressureless Sintering Behavior of ZrB2-HfB2 Ultra High Temperature Composite [Volume 33, Issue 2, 2015, Pages 85-97]
