Abbasi, M. H. Synthesis of MoSi2-TiB2 Nanocomposite by Mechanical Alloying through Two Methods and Comparison of Their Properties for Use in Thermal Spraying Process [Volume 34, Issue 2, 2015, Pages 1-17]
Aghajani, H. Effect of Aluminium Injection into the Crystalizator on Type, Composition and Activity of Inclusions in Low Carbon Steel [Volume 34, Issue 1, 2015, Pages 9-23]
Ahmadi, S. Investigation of Crystallization Kinetics of Fe36Cr12Mo10 and α-Fe Phases in Devitrification of Fe51Cr18Mo7B16C4Nb4 Amorphous Alloy [Volume 34, Issue 1, 2015, Pages 45-53]
Alamolhoda, S. Effect of Excess Al in TiO2-Al Powder Mixture and Susceptor Material on Microwave Synthesis of TiAl/Al2O3 Composite [Volume 34, Issue 4, 2016, Pages 53-60]
Alizadeh, M. Effect of Al2O3 Particles on Mechanical Properties of Al-(0-40%)Al2O3 Composite Foams Produced by Low Energy Mechanical Alloying [Volume 34, Issue 1, 2015, Pages 1-8]
Alizadeh, M. Effect of Grain Size Reduction by Sodium Molybdate on Mechanical Properties of Al-0.7Fe Alloy [Volume 34, Issue 3, 2015, Pages 39-48]
Amiri, H. Synthesizing CoFe2O4 by Glass-Ceramic Method and Characterizing its Magnetic Properties in Na2O-Fe2O3-CoO-B2O3-SiO2 System [Volume 34, Issue 2, 2015, Pages 61-69]
Amooaghaie, R. Effets of Silver Salt Concentrations on Green Synthesis of Silver Nanoparticles Using the Plant Nigella Saliva [Volume 34, Issue 4, 2016, Pages 33-41]
Arabi Jeshvaghani, R. Investigation of Crystallization Kinetics of Fe36Cr12Mo10 and α-Fe Phases in Devitrification of Fe51Cr18Mo7B16C4Nb4 Amorphous Alloy [Volume 34, Issue 1, 2015, Pages 45-53]
Ashrafizadeh, F. Synthesis of MoSi2-TiB2 Nanocomposite by Mechanical Alloying through Two Methods and Comparison of Their Properties for Use in Thermal Spraying Process [Volume 34, Issue 2, 2015, Pages 1-17]
Ashrafizadeh, F. Effect of Discontinuous Ultrasonic Treatment on Mechanical Properties and Microstructure of Cast Al413-SiCnp Nanocomposites [Volume 34, Issue 1, 2015, Pages 87-103]
Ashrafizadeh, F. Effect of Grain Size on the Corrosion Behavior of 304L Stainless Steel [Volume 34, Issue 4, 2016, Pages 61-72]
Ashrafizadeh, F. Comparison of Super-Hydrophobicity and Corrosion Resistance of Micro-Nano Structured Nickel and Nickel- Cobalt Alloy Coatings on Copper Substrate [Volume 34, Issue 4, 2016, Pages 87-105]
Asjadi, F. Analysis of Structural and Magnetic Characteristics of Nickel Ferrite Nanoparticles Prepared by Hydrothermal Method [Volume 34, Issue 1, 2015, Pages 35-43]
Atapour, M. Investigation of the Mechanical Properties of AISI 316 Austenitic Stainless Steel and St 37 Low Carbon Steel Dissimilar Joint by Friction Stir Welding [Volume 34, Issue 2, 2015, Pages 89-101]
Atapour, M. Microstructure and Corrosion Behavior Investigation of Al5083-H321 GMAW Weldment in Sea Water [Volume 34, Issue 3, 2015, Pages 107-115]
Atapour, M. Effect of Grain Size on the Corrosion Behavior of 304L Stainless Steel [Volume 34, Issue 4, 2016, Pages 61-72]
Azizi1, M. Effets of Silver Salt Concentrations on Green Synthesis of Silver Nanoparticles Using the Plant Nigella Saliva [Volume 34, Issue 4, 2016, Pages 33-41]
B
Bahramian, A. Influence of Gr and MoS2 Particles on High Temperature Tribological Properties of Ni-SiC Composite Coating [Volume 34, Issue 1, 2015, Pages 105-121]
Bahramzadeh, S. Influence of Gr and MoS2 Particles on High Temperature Tribological Properties of Ni-SiC Composite Coating [Volume 34, Issue 1, 2015, Pages 105-121]
Bakhshi, S. R. Synthesis of Silicon Nitride by Mechanical Alloying and Heat Treatment [Volume 34, Issue 4, 2016, Pages 9-18]
Bakhshi, S.R. Influence of Gr and MoS2 Particles on High Temperature Tribological Properties of Ni-SiC Composite Coating [Volume 34, Issue 1, 2015, Pages 105-121]
Barekat, S.M. Fabrication of Yttria Nanopowder by Precipitation Method Using Micro Meter Powder [Volume 34, Issue 3, 2015, Pages 97-106]
Bassaki, S. Investigation of Photocatalytic Properties of NiO/TiO2 Layers Grown via PEO/EPD Method [Volume 34, Issue 3, 2015, Pages 87-95]
Bazzaz Bonabi, S. Influence of Parameters of Quenching and Partitioning Process on Microstructure and Fraction of Retained Austenite [Volume 34, Issue 2, 2015, Pages 79-87]
Beitollahi, A. Synthesizing CoFe2O4 by Glass-Ceramic Method and Characterizing its Magnetic Properties in Na2O-Fe2O3-CoO-B2O3-SiO2 System [Volume 34, Issue 2, 2015, Pages 61-69]
Bodaghi, F. Microstructure and Corrosion Behavior Investigation of Al5083-H321 GMAW Weldment in Sea Water [Volume 34, Issue 3, 2015, Pages 107-115]
Borhani, G.H. Synthesis of Silicon Nitride by Mechanical Alloying and Heat Treatment [Volume 34, Issue 4, 2016, Pages 9-18]
D
Dana, M.M. Effect of Grain Size on the Corrosion Behavior of 304L Stainless Steel [Volume 34, Issue 4, 2016, Pages 61-72]
Dashtbayazi, M.R. Optimizing Properties of Aluminum-Based Nanocomposites by Genetic Algorithm Method [Volume 34, Issue 2, 2015, Pages 19-30]
Dashtbayazi, M.R. Simulation of Elastic Properties of Polymer- Clay Nanocomposite [Volume 34, Issue 3, 2015, Pages 69-86]
Dehestani, M. Density Functional Theory Calculation on Improving the Photocatalytic Properties of Zinc Oxide and Cadmium Sulfide by Hybridization with Metal-Organic Framework [Volume 34, Issue 4, 2016, Pages 107-113]
Dehnavi, M.R. Effect of Discontinuous Ultrasonic Treatment on Mechanical Properties and Microstructure of Cast Al413-SiCnp Nanocomposites [Volume 34, Issue 1, 2015, Pages 87-103]
Doostmohammadi, A. Fabrication and Characterization of Novel Willemite Nanobioceramic for Bone Defect Repair [Volume 34, Issue 1, 2015, Pages 79-86]
Doostmohammadi, A. Preparation, Characterization and Comparative Study of Antibacterial Properties of Ag-TiO2 and ZnO-TiO2 Nanoparticles [Volume 34, Issue 4, 2016, Pages 43-52]
E
Esmaeili, R. Optimizing Properties of Aluminum-Based Nanocomposites by Genetic Algorithm Method [Volume 34, Issue 2, 2015, Pages 19-30]
F
Fazel, M. Influence of Gr and MoS2 Particles on High Temperature Tribological Properties of Ni-SiC Composite Coating [Volume 34, Issue 1, 2015, Pages 105-121]
G
Garsivaz jazi1, M.R. Influence of Gr and MoS2 Particles on High Temperature Tribological Properties of Ni-SiC Composite Coating [Volume 34, Issue 1, 2015, Pages 105-121]
Ghasemi, A. Investigating the Effect of Microstructure on Oxidation Behavior of Ti47Al48Mn5 Alloy Synthesized by Mechanical Alloying [Volume 34, Issue 2, 2015, Pages 31-48]
Ghasemi, A. Effect of Mg, Co and Ti Cations on Magnetic and Microwave Properties of SrFe12O19 Nanoparticles [Volume 34, Issue 4, 2016, Pages 19-31]
Ghasemi, S.S. Fabrication of Mullite-Alumina-SiC Composites by In-Situ Reaction during Carbothermal Reduction of Inorganic Materials [Volume 34, Issue 3, 2015, Pages 1-11]
Ghayebloo, M. Effect of Al-5Ti-B Inoculant Addition on the Graded Microstructure of Centrifugally Cast Al-13.8 wt.% Mg2Si Composite [Volume 34, Issue 2, 2015, Pages 49-59]
Ghotbi varzaneh, A. Effect of Isothermal Ageing on Structural and Magnetic Properties of Ni47Mn40Sn13 Ferromagnetic Shape Memory Alloy [Volume 34, Issue 3, 2015, Pages 29-38]
Golestani Fard, F. Investigation of Photocatalytic Properties of NiO/TiO2 Layers Grown via PEO/EPD Method [Volume 34, Issue 3, 2015, Pages 87-95]
Gordani, G. Effect of Mg, Co and Ti Cations on Magnetic and Microwave Properties of SrFe12O19 Nanoparticles [Volume 34, Issue 4, 2016, Pages 19-31]
H
Hadi, M. Investigating the Effect of Microstructure on Oxidation Behavior of Ti47Al48Mn5 Alloy Synthesized by Mechanical Alloying [Volume 34, Issue 2, 2015, Pages 31-48]
Haerifar, M. Effect of Current Density on Microstructure of Mn-Cu Thin Films produced by Electroplating Coating Technique [Volume 34, Issue 1, 2015, Pages 25-33]
Haghdoost, F. Preparation of Fabric Sensor for Heart Signal Acquisition Using Printing and Electroless Plating of Copper on Polyester Fabric [Volume 34, Issue 2, 2015, Pages 115-124]
Hajizamani, M. Effect of Grain Size Reduction by Sodium Molybdate on Mechanical Properties of Al-0.7Fe Alloy [Volume 34, Issue 3, 2015, Pages 39-48]
Honarbakhsh Raouf, A. Influence of Parameters of Quenching and Partitioning Process on Microstructure and Fraction of Retained Austenite [Volume 34, Issue 2, 2015, Pages 79-87]
J
Jafarpour, M. Effect of Aluminium Injection into the Crystalizator on Type, Composition and Activity of Inclusions in Low Carbon Steel [Volume 34, Issue 1, 2015, Pages 9-23]
K
Kalantar, M. Fabrication of Mullite-Alumina-SiC Composites by In-Situ Reaction during Carbothermal Reduction of Inorganic Materials [Volume 34, Issue 3, 2015, Pages 1-11]
Kalantar, M. Fabrication of Mullite-Alumina-SiC Composites by In-Situ Reaction during Carbothermal Reduction of Inorganic Materials [Volume 34, Issue 3, 2015, Pages 1-11]
Kameli, P. Effect of Isothermal Ageing on Structural and Magnetic Properties of Ni47Mn40Sn13 Ferromagnetic Shape Memory Alloy [Volume 34, Issue 3, 2015, Pages 29-38]
Karimi, H. Investigating the Effect of Microstructure on Oxidation Behavior of Ti47Al48Mn5 Alloy Synthesized by Mechanical Alloying [Volume 34, Issue 2, 2015, Pages 31-48]
Karimzadeh, F. Effect of Isothermal Ageing on Structural and Magnetic Properties of Ni47Mn40Sn13 Ferromagnetic Shape Memory Alloy [Volume 34, Issue 3, 2015, Pages 29-38]
Keshavarz Alamdari, E. Purification of Gold from Chloride Leach Liquor of Copper Anode Slime by Octanol-Kerosene Organic Extractant [Volume 34, Issue 2, 2015, Pages 71-78]
Khajelakzay, M. Fabrication of Yttria Nanopowder by Precipitation Method Using Micro Meter Powder [Volume 34, Issue 3, 2015, Pages 97-106]
Khajelakzay, M. Synthesis of Silicon Nitride by Mechanical Alloying and Heat Treatment [Volume 34, Issue 4, 2016, Pages 9-18]
Khayati, G. Effect of Al2O3 Addition as Diluent on Combustion Synthesis of Al2O3-ZrB2 Composite [Volume 34, Issue 4, 2016, Pages 1-8]
Khorsand, S. Comparison of Super-Hydrophobicity and Corrosion Resistance of Micro-Nano Structured Nickel and Nickel- Cobalt Alloy Coatings on Copper Substrate [Volume 34, Issue 4, 2016, Pages 87-105]
Khoshandam, B. Evaluation of Ability of Hydrogen Absorption in SAB-16/Pd Nanostructure Composite [Volume 34, Issue 3, 2015, Pages 13-27]
Khosrovaninezhad, A.H. Investigation of the Mechanical Properties of AISI 316 Austenitic Stainless Steel and St 37 Low Carbon Steel Dissimilar Joint by Friction Stir Welding [Volume 34, Issue 2, 2015, Pages 89-101]
M
Mahmoudi Meymand, M. Simulation of Elastic Properties of Polymer- Clay Nanocomposite [Volume 34, Issue 3, 2015, Pages 69-86]
Mashhadi, M. The Effects of NH4Cl and Particle Size of Al Powder in AlN Whiskers Synthesis by Direct Nitridation [Volume 34, Issue 1, 2015, Pages 55-66]
Mashreghi, A. Fabrication of Mullite-Alumina-SiC Composites by In-Situ Reaction during Carbothermal Reduction of Inorganic Materials [Volume 34, Issue 3, 2015, Pages 1-11]
Meraji, F. The Effects of NH4Cl and Particle Size of Al Powder in AlN Whiskers Synthesis by Direct Nitridation [Volume 34, Issue 1, 2015, Pages 55-66]
Mirkazemi, S. M. Synthesizing CoFe2O4 by Glass-Ceramic Method and Characterizing its Magnetic Properties in Na2O-Fe2O3-CoO-B2O3-SiO2 System [Volume 34, Issue 2, 2015, Pages 61-69]
Mirkazemi, S. M. Effect of PVP Additive on Properties of Cobalt Ferrite Nanoparticles Prepared by Hydrothermal Method [Volume 34, Issue 1, 2015, Pages 67-77]
Mirzaei, M. Effect of Al2O3 Particles on Mechanical Properties of Al-(0-40%)Al2O3 Composite Foams Produced by Low Energy Mechanical Alloying [Volume 34, Issue 1, 2015, Pages 1-8]
Mohammadi, S. Fabrication and Characterization of Novel Willemite Nanobioceramic for Bone Defect Repair [Volume 34, Issue 1, 2015, Pages 79-86]
Monshi, A. Preparation, Characterization and Comparative Study of Antibacterial Properties of Ag-TiO2 and ZnO-TiO2 Nanoparticles [Volume 34, Issue 4, 2016, Pages 43-52]
Mottaghitalab, V. Preparation of Fabric Sensor for Heart Signal Acquisition Using Printing and Electroless Plating of Copper on Polyester Fabric [Volume 34, Issue 2, 2015, Pages 115-124]
N
Naghizadeh, R. Investigation of Photocatalytic Properties of NiO/TiO2 Layers Grown via PEO/EPD Method [Volume 34, Issue 3, 2015, Pages 87-95]
Nayerhoda, R. Analysis of Structural and Magnetic Characteristics of Nickel Ferrite Nanoparticles Prepared by Hydrothermal Method [Volume 34, Issue 1, 2015, Pages 35-43]
Nemati, A. The Effects of NH4Cl and Particle Size of Al Powder in AlN Whiskers Synthesis by Direct Nitridation [Volume 34, Issue 1, 2015, Pages 55-66]
Niroumand, B. Effect of Discontinuous Ultrasonic Treatment on Mechanical Properties and Microstructure of Cast Al413-SiCnp Nanocomposites [Volume 34, Issue 1, 2015, Pages 87-103]
O
Otroj, S. Study of Nano-Titania Addition on Mechanical Strength of Mullite-Bonded Alumina-Silicon Carbide Nano-Composites [Volume 34, Issue 3, 2015, Pages 49-58]
P
Pezeshki, D. Effect of Al2O3 Addition as Diluent on Combustion Synthesis of Al2O3-ZrB2 Composite [Volume 34, Issue 4, 2016, Pages 1-8]
Pourestarabadi, S. Density Functional Theory Calculation on Improving the Photocatalytic Properties of Zinc Oxide and Cadmium Sulfide by Hybridization with Metal-Organic Framework [Volume 34, Issue 4, 2016, Pages 107-113]
R
Rabiee, S. M. Characterization of Nanonanocrystalline Mg-6Al-1Zn-1Si Alloy Powder During Mechanical Alloying and Subsequent Annealing [Volume 34, Issue 2, 2015, Pages 103-113]
Rabiee, S.M. Effect of Al2O3 Addition as Diluent on Combustion Synthesis of Al2O3-ZrB2 Composite [Volume 34, Issue 4, 2016, Pages 1-8]
Radmehr, P. Effect of Excess Al in TiO2-Al Powder Mixture and Susceptor Material on Microwave Synthesis of TiAl/Al2O3 Composite [Volume 34, Issue 4, 2016, Pages 53-60]
Raeissi, K. Comparison of Super-Hydrophobicity and Corrosion Resistance of Micro-Nano Structured Nickel and Nickel- Cobalt Alloy Coatings on Copper Substrate [Volume 34, Issue 4, 2016, Pages 87-105]
Rajabi, M. Characterization of Nanonanocrystalline Mg-6Al-1Zn-1Si Alloy Powder During Mechanical Alloying and Subsequent Annealing [Volume 34, Issue 2, 2015, Pages 103-113]
Rajabi, M. Effect of Al2O3 Addition as Diluent on Combustion Synthesis of Al2O3-ZrB2 Composite [Volume 34, Issue 4, 2016, Pages 1-8]
Ramazani, M. Influence of Gr and MoS2 Particles on High Temperature Tribological Properties of Ni-SiC Composite Coating [Volume 34, Issue 1, 2015, Pages 105-121]
Rashidzadeh, M. Investigation of Photocatalytic Properties of NiO/TiO2 Layers Grown via PEO/EPD Method [Volume 34, Issue 3, 2015, Pages 87-95]
Razmjouee, P. Effect of PVP Additive on Properties of Cobalt Ferrite Nanoparticles Prepared by Hydrothermal Method [Volume 34, Issue 1, 2015, Pages 67-77]
Rezaeian, A. Investigation of the Mechanical Properties of AISI 316 Austenitic Stainless Steel and St 37 Low Carbon Steel Dissimilar Joint by Friction Stir Welding [Volume 34, Issue 2, 2015, Pages 89-101]
Rostamizadeh, E. Synthesis of MoSi2-TiB2 Nanocomposite by Mechanical Alloying through Two Methods and Comparison of Their Properties for Use in Thermal Spraying Process [Volume 34, Issue 2, 2015, Pages 1-17]
S
Sadeghi, M. Investigating the Effect of Microstructure on Oxidation Behavior of Ti47Al48Mn5 Alloy Synthesized by Mechanical Alloying [Volume 34, Issue 2, 2015, Pages 31-48]
Sadeghi, N. Purification of Gold from Chloride Leach Liquor of Copper Anode Slime by Octanol-Kerosene Organic Extractant [Volume 34, Issue 2, 2015, Pages 71-78]
Saeri, M.R. Fabrication and Characterization of Novel Willemite Nanobioceramic for Bone Defect Repair [Volume 34, Issue 1, 2015, Pages 79-86]
Saeri, M.R. Study of Nano-Titania Addition on Mechanical Strength of Mullite-Bonded Alumina-Silicon Carbide Nano-Composites [Volume 34, Issue 3, 2015, Pages 49-58]
Saeri, M.R. Effets of Silver Salt Concentrations on Green Synthesis of Silver Nanoparticles Using the Plant Nigella Saliva [Volume 34, Issue 4, 2016, Pages 33-41]
Safari Kooshali, F. Evaluation of Ability of Hydrogen Absorption in SAB-16/Pd Nanostructure Composite [Volume 34, Issue 3, 2015, Pages 13-27]
Saidi, A. Effect of Mg, Co and Ti Cations on Magnetic and Microwave Properties of SrFe12O19 Nanoparticles [Volume 34, Issue 4, 2016, Pages 19-31]
Salamati, H. Effect of Isothermal Ageing on Structural and Magnetic Properties of Ni47Mn40Sn13 Ferromagnetic Shape Memory Alloy [Volume 34, Issue 3, 2015, Pages 29-38]
Salimi, M. Analysis of Structural and Magnetic Characteristics of Nickel Ferrite Nanoparticles Prepared by Hydrothermal Method [Volume 34, Issue 1, 2015, Pages 35-43]
Samadi, A. Effect of Al-5Ti-B Inoculant Addition on the Graded Microstructure of Centrifugally Cast Al-13.8 wt.% Mg2Si Composite [Volume 34, Issue 2, 2015, Pages 49-59]
Sedighi, R. A. Characterization of Nanonanocrystalline Mg-6Al-1Zn-1Si Alloy Powder During Mechanical Alloying and Subsequent Annealing [Volume 34, Issue 2, 2015, Pages 103-113]
Seifi, P. Analysis of Structural and Magnetic Characteristics of Nickel Ferrite Nanoparticles Prepared by Hydrothermal Method [Volume 34, Issue 1, 2015, Pages 35-43]
Seifollahzadeh, P. Fabrication of Mullite-Alumina-SiC Composites by In-Situ Reaction during Carbothermal Reduction of Inorganic Materials [Volume 34, Issue 3, 2015, Pages 1-11]
Shaban Ghazani, M. Fabrication of Ultra-Fine Grained Plain Low Carbon Steel through Dynamic Strain Induced Transformation during Integrated Extrusion Equal Channel Angular Pressing [Volume 34, Issue 4, 2016, Pages 73-85]
Shahverdi, H.R. Investigation of Crystallization Kinetics of Fe36Cr12Mo10 and α-Fe Phases in Devitrification of Fe51Cr18Mo7B16C4Nb4 Amorphous Alloy [Volume 34, Issue 1, 2015, Pages 45-53]
Shamanian, M. Investigation of the Mechanical Properties of AISI 316 Austenitic Stainless Steel and St 37 Low Carbon Steel Dissimilar Joint by Friction Stir Welding [Volume 34, Issue 2, 2015, Pages 89-101]
Shamanian, M. Microstructure and Corrosion Behavior Investigation of Al5083-H321 GMAW Weldment in Sea Water [Volume 34, Issue 3, 2015, Pages 107-115]
Sharifi, N. Transparency Effect of Electrolyte on Light Back-Scattering in Dye-Sensitized Solar Cells [Volume 34, Issue 3, 2015, Pages 59-67]
Shirali, A. Influence of Parameters of Quenching and Partitioning Process on Microstructure and Fraction of Retained Austenite [Volume 34, Issue 2, 2015, Pages 79-87]
Shoja Razavi, R. Fabrication of Yttria Nanopowder by Precipitation Method Using Micro Meter Powder [Volume 34, Issue 3, 2015, Pages 97-106]
Shoja Razavi, R. Fabrication of Yttria Nanopowder by Precipitation Method Using Micro Meter Powder [Volume 34, Issue 3, 2015, Pages 97-106]
Shokrvash, H. Fabrication of Ultra-Fine Grained Plain Low Carbon Steel through Dynamic Strain Induced Transformation during Integrated Extrusion Equal Channel Angular Pressing [Volume 34, Issue 4, 2016, Pages 73-85]
Soltanieh, M. Effect of Aluminium Injection into the Crystalizator on Type, Composition and Activity of Inclusions in Low Carbon Steel [Volume 34, Issue 1, 2015, Pages 9-23]
T
Tamizifar, M. The Effects of NH4Cl and Particle Size of Al Powder in AlN Whiskers Synthesis by Direct Nitridation [Volume 34, Issue 1, 2015, Pages 55-66]
Tavakoli, H. Effect of Aluminium Injection into the Crystalizator on Type, Composition and Activity of Inclusions in Low Carbon Steel [Volume 34, Issue 1, 2015, Pages 9-23]
V
Vajd, A. Fabrication of Ultra-Fine Grained Plain Low Carbon Steel through Dynamic Strain Induced Transformation during Integrated Extrusion Equal Channel Angular Pressing [Volume 34, Issue 4, 2016, Pages 73-85]
Y
Yazdkhasti, S. Preparation, Characterization and Comparative Study of Antibacterial Properties of Ag-TiO2 and ZnO-TiO2 Nanoparticles [Volume 34, Issue 4, 2016, Pages 43-52]
Yousefpour, M.A. Evaluation of Ability of Hydrogen Absorption in SAB-16/Pd Nanostructure Composite [Volume 34, Issue 3, 2015, Pages 13-27]
Z
Zakeri, A. Effect of Excess Al in TiO2-Al Powder Mixture and Susceptor Material on Microwave Synthesis of TiAl/Al2O3 Composite [Volume 34, Issue 4, 2016, Pages 53-60]
Zakeri, N. Study of Nano-Titania Addition on Mechanical Strength of Mullite-Bonded Alumina-Silicon Carbide Nano-Composites [Volume 34, Issue 3, 2015, Pages 49-58]
Zandrahimi, M. Effect of Current Density on Microstructure of Mn-Cu Thin Films produced by Electroplating Coating Technique [Volume 34, Issue 1, 2015, Pages 25-33]
Zare, A. Investigating the Effect of Microstructure on Oxidation Behavior of Ti47Al48Mn5 Alloy Synthesized by Mechanical Alloying [Volume 34, Issue 2, 2015, Pages 31-48]
Zeidabadinejad, L. Density Functional Theory Calculation on Improving the Photocatalytic Properties of Zinc Oxide and Cadmium Sulfide by Hybridization with Metal-Organic Framework [Volume 34, Issue 4, 2016, Pages 107-113]
