Abdolahi, A. Preparation and characterization of the solâgel nano-bioactive glasses modiïed by the coupling agent 3-(Trimethoxysilyl) Propyl methacrylate [Volume 35, Issue 1, 2016, Pages 23-33]
Ahmadi, S. Effects of Nb on Increasing Glass Form Ability in Fe- based Amorphous Alloys of Fe55-xCr18Mo7B16C4Nbx (X=0, 3, 4, 5) [Volume 35, Issue 2, 2016, Pages 67-81]
Ahmadi Brooghani, S.Y. Effect of Stone-Wales Defect on Ultimate Strength of Carbon Nanotubes [Volume 35, Issue 1, 2016, Pages 83-97]
Ashrafizadeh, F. Cladding of Cr- Modified NiAl Coating on 310 Stainless Steel Weld Cladding and Evaluation of its Wear Behavior. [Volume 35, Issue 4, 2017, Pages 39-50]
Aslibeiki, B. Preparation of Cobalt Ferrite Nanocrystallites by Annealing of Alloyed Intermetallic Co-Fe and Study of Magnetic Behavior [Volume 35, Issue 4, 2017, Pages 83-89]
Assadi, M. Evaluation and Comparison of the Effects of RRA, T73 and T6 Heat Treatments on Hardness, Tensile and Bending Strengths of 7075 Aluminum Alloy [Volume 35, Issue 2, 2016, Pages 11-30]
Atapour, M. Cladding of Cr- Modified NiAl Coating on 310 Stainless Steel Weld Cladding and Evaluation of its Wear Behavior. [Volume 35, Issue 4, 2017, Pages 39-50]
Avishan, B. Effect of Dislocation Density on Deformation Behavior of Super Strong Bainitic Steel [Volume 35, Issue 4, 2017, Pages 101-111]
Azadbeh, M. An Investigation of Evolutions during Liquid Phase Sintering of Systems with Volatile Components [Volume 35, Issue 3, 2016, Pages 95-105]
B
Babakhani, A. Fabrication of AA356/SiCp Aluminum Composite Foam via In-Situ Foaming Route of Melt using CaCO3 Foaming Agent and an Investigation of its Compressive Properties [Volume 35, Issue 4, 2017, Pages 51-68]
Bahrami, M. Synthesis and Characterization of Hybrid Silica-Zirconia Coatings with Cerium Inhibitor on Aluminum 6061 [Volume 35, Issue 3, 2016, Pages 1-12]
Bakhshi, S.R. Synthesis and Characterization of Hybrid Silica-Zirconia Coatings with Cerium Inhibitor on Aluminum 6061 [Volume 35, Issue 3, 2016, Pages 1-12]
Baniadam, M. Novel Approach for Electrochemical Functionalization of Graphene with Surfactant [Volume 35, Issue 4, 2017, Pages 27-38]
Baradaran, M. Preparation and Characterization of Polycaprolactone / Layered Double Hydroxide Nanocomposite for Hard Tissue Engineering Applications [Volume 35, Issue 3, 2016, Pages 13-28]
Bestetti, M. Study on the Effect of Annealing Process on Microstructure and Electrochemical Behavior of the Binary Mn-Ni Nano-Oxide Pseudocapacitor Synthesized by Anodic Deposition [Volume 35, Issue 3, 2016, Pages 107-121]
Binesh, B. Microstructure Evolution and Mechanical Properties of TLP Bonded Joint of IN-738LC Superalloy using MBF-20 Amorphous Foil [Volume 35, Issue 3, 2016, Pages 123-137]
Borhani, G.H. Synthesis and Characterization of Hybrid Silica-Zirconia Coatings with Cerium Inhibitor on Aluminum 6061 [Volume 35, Issue 3, 2016, Pages 1-12]
Borouni, M. Effects of Friction Stir Processing and T6 Heat Treatment on Wear Properties of Weld Metal of Cast AZ91C Alloy [Volume 35, Issue 1, 2016, Pages 99-107]
D
Davar, F. Synthesis of La3+ and Nd3+ co-Doped Yttria Nanopowder by Sol-Gel Combustion Method [Volume 35, Issue 4, 2017, Pages 1-11]
Davar, F. Synthesis of La3+ and Nd3+ co-Doped Yttria Nanopowder by Sol-Gel Combustion Method [Volume 35, Issue 4, 2017, Pages 1-11]
Deljavan, S. Investigation of Tantalum Cation Doped Ba (Co0.8Fe0.2) O3âδ Perovskite Phase [Volume 35, Issue 1, 2016, Pages 47-55]
Divandari, M. Effects of Melt/Solid Volume Ratio and Rotational Speed on the Interface of Al/Mg Bimetal in Centrifugal Casting [Volume 35, Issue 2, 2016, Pages 83-94]
Doostmohammadi, A. Preparation and characterization of the solâgel nano-bioactive glasses modiïed by the coupling agent 3-(Trimethoxysilyl) Propyl methacrylate [Volume 35, Issue 1, 2016, Pages 23-33]
Doostmohammadi, A. Fabrication of Chitosan/Poly (vinyl alcohol)/Carbon Nanotube/Bioactive Glass Nanocomposite Scaffolds for Neural Tissue Engineering [Volume 35, Issue 1, 2016, Pages 35-46]
Doostmohammdi, A. A Comparative Study of the Addition Effect of Diopside and Silica Sulfuric Acid Nanoparticles on Mechanical Properties of Glass Ionomer Cements [Volume 35, Issue 2, 2016, Pages 131-144]
E
Emadi, R. Use of Optimization Algorithm for Simulation of Spark Plasma Sintering Process in Si3N4-SiO2 Composite [Volume 35, Issue 3, 2016, Pages 29-43]
Enayati, M. Effects of Friction Stir Processing and T6 Heat Treatment on Wear Properties of Weld Metal of Cast AZ91C Alloy [Volume 35, Issue 1, 2016, Pages 99-107]
Esmaeili, F. Fabrication of Chitosan/Poly (vinyl alcohol)/Carbon Nanotube/Bioactive Glass Nanocomposite Scaffolds for Neural Tissue Engineering [Volume 35, Issue 1, 2016, Pages 35-46]
Esmaeily, A.S. Elimination of Mn3Ga with Low Crystal Symmetry in Alloying Mn-Ga by Ge Addition [Volume 35, Issue 2, 2016, Pages 55-65]
F
Faqeeh, A. Preparation of Cobalt Ferrite Nanocrystallites by Annealing of Alloyed Intermetallic Co-Fe and Study of Magnetic Behavior [Volume 35, Issue 4, 2017, Pages 83-89]
Foroghi, A. R. Microstructure Evolution and Mechanical Properties of TLP Bonded Joint of IN-738LC Superalloy using MBF-20 Amorphous Foil [Volume 35, Issue 3, 2016, Pages 123-137]
G
Ghasemi, A. The Role of Annealing Temperature on Structural and Magnetic Properties of NdFeB Thin Films [Volume 35, Issue 1, 2016, Pages 109-119]
Ghasemi, A. Development of High Energy Thin Layers of Exchange Spring Magnets Originating from Rare Earth Magnets of NdFeB/FeCo [Volume 35, Issue 2, 2016, Pages 1-10]
Ghasemi, A. Synthesis and Characterization of Hybrid Silica-Zirconia Coatings with Cerium Inhibitor on Aluminum 6061 [Volume 35, Issue 3, 2016, Pages 1-12]
Ghasemi, A. Use of Optimization Algorithm for Simulation of Spark Plasma Sintering Process in Si3N4-SiO2 Composite [Volume 35, Issue 3, 2016, Pages 29-43]
Gholipour, S. Evaluation of Hydrogen Damage in Aluminum 7075 Alloy after Dissolution Annealing and Two-stage Aging [Volume 35, Issue 1, 2016, Pages 1-10]
Ghorbani, S. Synthesis of La3+ and Nd3+ co-Doped Yttria Nanopowder by Sol-Gel Combustion Method [Volume 35, Issue 4, 2017, Pages 1-11]
Golestanipour, M. Fabrication of AA356/SiCp Aluminum Composite Foam via In-Situ Foaming Route of Melt using CaCO3 Foaming Agent and an Investigation of its Compressive Properties [Volume 35, Issue 4, 2017, Pages 51-68]
Golozar, M. A. Study on the Effect of Annealing Process on Microstructure and Electrochemical Behavior of the Binary Mn-Ni Nano-Oxide Pseudocapacitor Synthesized by Anodic Deposition [Volume 35, Issue 3, 2016, Pages 107-121]
Golozar, M. A. Study on the Effect of Annealing Process on Microstructure and Electrochemical Behavior of the Binary Mn-Ni Nano-Oxide Pseudocapacitor Synthesized by Anodic Deposition [Volume 35, Issue 3, 2016, Pages 107-121]
H
Hadi, M. The Role of Annealing Temperature on Structural and Magnetic Properties of NdFeB Thin Films [Volume 35, Issue 1, 2016, Pages 109-119]
Hakimi, M. Elimination of Mn3Ga with Low Crystal Symmetry in Alloying Mn-Ga by Ge Addition [Volume 35, Issue 2, 2016, Pages 55-65]
Hakimi, M. Effect of Preparation Method on Phase Formation Process and Structural and Magnetic Properties of Mn2.5Ge Samples [Volume 35, Issue 3, 2016, Pages 45-56]
Hakimi, M. Preparation of Cobalt Ferrite Nanocrystallites by Annealing of Alloyed Intermetallic Co-Fe and Study of Magnetic Behavior [Volume 35, Issue 4, 2017, Pages 83-89]
Hasani, A. Novel Approach for Electrochemical Functionalization of Graphene with Surfactant [Volume 35, Issue 4, 2017, Pages 27-38]
Hassani, B. Effects of Friction Stir Processing and T6 Heat Treatment on Wear Properties of Weld Metal of Cast AZ91C Alloy [Volume 35, Issue 1, 2016, Pages 99-107]
Hosseini, S.R. Evaluation of Hydrogen Damage in Aluminum 7075 Alloy after Dissolution Annealing and Two-stage Aging [Volume 35, Issue 1, 2016, Pages 1-10]
Hosseini, S.R. Evaluation and Comparison of the Effects of RRA, T73 and T6 Heat Treatments on Hardness, Tensile and Bending Strengths of 7075 Aluminum Alloy [Volume 35, Issue 2, 2016, Pages 11-30]
J
Jafarian, M. The Comparison of Microstructure and Mechanical Properties of Diffusion Joints of 5754, 6061, and 7039 Aluminum Alloys to AZ31 Magnesium Alloy [Volume 35, Issue 1, 2016, Pages 11-21]
Jafarian, M. The Comparison of Microstructure and Mechanical Properties of Diffusion Joints of 5754, 6061, and 7039 Aluminum Alloys to AZ31 Magnesium Alloy [Volume 35, Issue 1, 2016, Pages 11-21]
Jafarian, M. Investigating the Effect of Co-Cr-Sn Ions Substitution on Microstructure and Magnetic Properties of M-type Barium Hexaferrites [Volume 35, Issue 3, 2016, Pages 69-80]
JazayeriGharehbagh, A. Microstructure Evolution and Mechanical Properties of TLP Bonded Joint of IN-738LC Superalloy using MBF-20 Amorphous Foil [Volume 35, Issue 3, 2016, Pages 123-137]
K
Kakroudi, M. G. Investigation of Tantalum Cation Doped Ba (Co0.8Fe0.2) O3âδ Perovskite Phase [Volume 35, Issue 1, 2016, Pages 47-55]
Kalantar, M. Investigation of Reaction Mechanism, Structure and Mechanical Properties of the In-situ Composites Fabricated in Al-V2O5-NiO System [Volume 35, Issue 4, 2017, Pages 69-81]
Kalantar, M. Investigation of Reaction Mechanism, Structure and Mechanical Properties of the In-situ Composites Fabricated in Al-V2O5-NiO System [Volume 35, Issue 4, 2017, Pages 69-81]
Kameli, P. Effect of Preparation Method on Phase Formation Process and Structural and Magnetic Properties of Mn2.5Ge Samples [Volume 35, Issue 3, 2016, Pages 45-56]
Kameli, P. Preparation of Cobalt Ferrite Nanocrystallites by Annealing of Alloyed Intermetallic Co-Fe and Study of Magnetic Behavior [Volume 35, Issue 4, 2017, Pages 83-89]
Karimzadeh, F. Effects of Friction Stir Processing and T6 Heat Treatment on Wear Properties of Weld Metal of Cast AZ91C Alloy [Volume 35, Issue 1, 2016, Pages 99-107]
Karimzadeh, F.L. Evaluation of Properties of Crofer Stainless Steel Produced by Mechanical Alloying for Using as Interconnect Plates of Solid Oxide Fuel Cells [Volume 35, Issue 2, 2016, Pages 95-113]
Khajeh Aminian, M. Effect of Preparation Method on Phase Formation Process and Structural and Magnetic Properties of Mn2.5Ge Samples [Volume 35, Issue 3, 2016, Pages 45-56]
Khanjani, A. The Role of Annealing Temperature on Structural and Magnetic Properties of NdFeB Thin Films [Volume 35, Issue 1, 2016, Pages 109-119]
Khanjani, A. R. Development of High Energy Thin Layers of Exchange Spring Magnets Originating from Rare Earth Magnets of NdFeB/FeCo [Volume 35, Issue 2, 2016, Pages 1-10]
Khorrami Mokhori, B. Evaluating the Properties of High-Temperature and Low-Temperature Wear of TiN Coatings Deposited at Different Temperatures [Volume 35, Issue 4, 2017, Pages 91-100]
L
Loghman-Estarki, M.R. Synthesis of La3+ and Nd3+ co-Doped Yttria Nanopowder by Sol-Gel Combustion Method [Volume 35, Issue 4, 2017, Pages 1-11]
Lotfi, B. Formation and Microstructural Characterization of Co-DepositedSilicon Aluminide Coating Produced by Pack Cementation Process at High Temperature [Volume 35, Issue 4, 2017, Pages 113-125]
M
Maghrebi, M. Novel Approach for Electrochemical Functionalization of Graphene with Surfactant [Volume 35, Issue 4, 2017, Pages 27-38]
Manouchehri, S. The Effect of Magnesium Substitution and Sintering Temperature on the Structural and Magnetic Properties of Manganese- Magnesium Ferrite [Volume 35, Issue 3, 2016, Pages 81-94]
Mashreghi, A. Investigation of Reaction Mechanism, Structure and Mechanical Properties of the In-situ Composites Fabricated in Al-V2O5-NiO System [Volume 35, Issue 4, 2017, Pages 69-81]
Mirarabshahi, F. Investigation of Reaction Mechanism, Structure and Mechanical Properties of the In-situ Composites Fabricated in Al-V2O5-NiO System [Volume 35, Issue 4, 2017, Pages 69-81]
Mohammadi Benehi, S.T. The Effect of Magnesium Substitution and Sintering Temperature on the Structural and Magnetic Properties of Manganese- Magnesium Ferrite [Volume 35, Issue 3, 2016, Pages 81-94]
Mohammadzadeh, A. An Investigation of Evolutions during Liquid Phase Sintering of Systems with Volatile Components [Volume 35, Issue 3, 2016, Pages 95-105]
Mokhtari, H. Elimination of Mn3Ga with Low Crystal Symmetry in Alloying Mn-Ga by Ge Addition [Volume 35, Issue 2, 2016, Pages 55-65]
Mortazavi, S.Z. Preparation and Characterization of Polycaprolactone / Layered Double Hydroxide Nanocomposite for Hard Tissue Engineering Applications [Volume 35, Issue 3, 2016, Pages 13-28]
Mosalaei, M. Investigation of Reaction Mechanism, Structure and Mechanical Properties of the In-situ Composites Fabricated in Al-V2O5-NiO System [Volume 35, Issue 4, 2017, Pages 69-81]
Mosleh, A. Characterization of Al-CNT Composite Nanoparticles Synthesized by Electrical Explosion of Wire in Acetone [Volume 35, Issue 2, 2016, Pages 47-53]
Mouchani, P. Optimization of the Silver Nanoparticles Synthesis and Printing a Conductive Pattern [Volume 35, Issue 4, 2017, Pages 13-25]
Mousapour, M. An Investigation of Evolutions during Liquid Phase Sintering of Systems with Volatile Components [Volume 35, Issue 3, 2016, Pages 95-105]
Moztarzadeh, F. Preparation and Characterization of Polycaprolactone / Layered Double Hydroxide Nanocomposite for Hard Tissue Engineering Applications [Volume 35, Issue 3, 2016, Pages 13-28]
N
Nazari, F. Elimination of Mn3Ga with Low Crystal Symmetry in Alloying Mn-Ga by Ge Addition [Volume 35, Issue 2, 2016, Pages 55-65]
Nezafati, N. Synthesis and Characterization of Silicate Calcium Phosphate Bioactive Glass Prepared by Electrospinning Method [Volume 35, Issue 1, 2016, Pages 57-69]
Nikbakht Katouli, S. Fabrication of Chitosan/Poly (vinyl alcohol)/Carbon Nanotube/Bioactive Glass Nanocomposite Scaffolds for Neural Tissue Engineering [Volume 35, Issue 1, 2016, Pages 35-46]
Niroumand, B. Effect of Structure and Surface Roughness on Wetting Angle of a Hypoeutectic Cast Iron [Volume 35, Issue 2, 2016, Pages 31-45]
Niroumand, B. Effect of Structure and Surface Roughness on Wetting Angle of a Hypoeutectic Cast Iron [Volume 35, Issue 2, 2016, Pages 31-45]
P
Paidar, M. The Comparison of Microstructure and Mechanical Properties of Diffusion Joints of 5754, 6061, and 7039 Aluminum Alloys to AZ31 Magnesium Alloy [Volume 35, Issue 1, 2016, Pages 11-21]
Pourkarimi, M. Formation and Microstructural Characterization of Co-DepositedSilicon Aluminide Coating Produced by Pack Cementation Process at High Temperature [Volume 35, Issue 4, 2017, Pages 113-125]
Pourmohamadi, S. Cladding of Cr- Modified NiAl Coating on 310 Stainless Steel Weld Cladding and Evaluation of its Wear Behavior. [Volume 35, Issue 4, 2017, Pages 39-50]
Poursalehi, R. Characterization of Al-CNT Composite Nanoparticles Synthesized by Electrical Explosion of Wire in Acetone [Volume 35, Issue 2, 2016, Pages 47-53]
R
Raeissi, K. Electrodeposition and Characterization of Nanocrystalline Nickel- Molybdenum Alloy [Volume 35, Issue 1, 2016, Pages 71-81]
Raeissi, K. Evaluation of Properties of Crofer Stainless Steel Produced by Mechanical Alloying for Using as Interconnect Plates of Solid Oxide Fuel Cells [Volume 35, Issue 2, 2016, Pages 95-113]
Raeissi, K. Study on the Effect of Annealing Process on Microstructure and Electrochemical Behavior of the Binary Mn-Ni Nano-Oxide Pseudocapacitor Synthesized by Anodic Deposition [Volume 35, Issue 3, 2016, Pages 107-121]
Rajaei, V. Electrodeposition and Characterization of Nanocrystalline Nickel- Molybdenum Alloy [Volume 35, Issue 1, 2016, Pages 71-81]
Rashtchi, H. Electrodeposition and Characterization of Nanocrystalline Nickel- Molybdenum Alloy [Volume 35, Issue 1, 2016, Pages 71-81]
Razavi, R.S. Synthesis of La3+ and Nd3+ co-Doped Yttria Nanopowder by Sol-Gel Combustion Method [Volume 35, Issue 4, 2017, Pages 1-11]
Razavi, R.S. Synthesis of La3+ and Nd3+ co-Doped Yttria Nanopowder by Sol-Gel Combustion Method [Volume 35, Issue 4, 2017, Pages 1-11]
Rezaei, F. Investigation of Tantalum Cation Doped Ba (Co0.8Fe0.2) O3âδ Perovskite Phase [Volume 35, Issue 1, 2016, Pages 47-55]
Rezaeinia, M. Use of Optimization Algorithm for Simulation of Spark Plasma Sintering Process in Si3N4-SiO2 Composite [Volume 35, Issue 3, 2016, Pages 29-43]
Rezazadeh, M. A Comparative Study of the Addition Effect of Diopside and Silica Sulfuric Acid Nanoparticles on Mechanical Properties of Glass Ionomer Cements [Volume 35, Issue 2, 2016, Pages 131-144]
Rezazadeh, M. Use of Optimization Algorithm for Simulation of Spark Plasma Sintering Process in Si3N4-SiO2 Composite [Volume 35, Issue 3, 2016, Pages 29-43]
Rezvani, M. Evaluation of Properties of Crofer Stainless Steel Produced by Mechanical Alloying for Using as Interconnect Plates of Solid Oxide Fuel Cells [Volume 35, Issue 2, 2016, Pages 95-113]
Riahi, S. Effect of Structure and Surface Roughness on Wetting Angle of a Hypoeutectic Cast Iron [Volume 35, Issue 2, 2016, Pages 31-45]
Riahi Noori, N. Optimization of the Silver Nanoparticles Synthesis and Printing a Conductive Pattern [Volume 35, Issue 4, 2017, Pages 13-25]
S
Saatchi, A. Use of Optimization Algorithm for Simulation of Spark Plasma Sintering Process in Si3N4-SiO2 Composite [Volume 35, Issue 3, 2016, Pages 29-43]
Saatchi, A. Use of Optimization Algorithm for Simulation of Spark Plasma Sintering Process in Si3N4-SiO2 Composite [Volume 35, Issue 3, 2016, Pages 29-43]
Saeri, M. R. Preparation and characterization of the solâgel nano-bioactive glasses modiïed by the coupling agent 3-(Trimethoxysilyl) Propyl methacrylate [Volume 35, Issue 1, 2016, Pages 23-33]
Saeri, M.R. A Comparative Study of the Addition Effect of Diopside and Silica Sulfuric Acid Nanoparticles on Mechanical Properties of Glass Ionomer Cements [Volume 35, Issue 2, 2016, Pages 131-144]
Safari, M. Effect of Deep Cryogenic Treatment on Hardness and Wear Behavior of 5120 AISI Steel [Volume 35, Issue 3, 2016, Pages 57-67]
Salehi, M. Investigating the Effect of Co-Cr-Sn Ions Substitution on Microstructure and Magnetic Properties of M-type Barium Hexaferrites [Volume 35, Issue 3, 2016, Pages 69-80]
Sarraf Mamoori, R. Optimization of the Silver Nanoparticles Synthesis and Printing a Conductive Pattern [Volume 35, Issue 4, 2017, Pages 13-25]
Sarvari, M. Effects of Melt/Solid Volume Ratio and Rotational Speed on the Interface of Al/Mg Bimetal in Centrifugal Casting [Volume 35, Issue 2, 2016, Pages 83-94]
Seyyed Afghahi, S. S. Investigating the Effect of Co-Cr-Sn Ions Substitution on Microstructure and Magnetic Properties of M-type Barium Hexaferrites [Volume 35, Issue 3, 2016, Pages 69-80]
Shafiei, S.S. Preparation and Characterization of Polycaprolactone / Layered Double Hydroxide Nanocomposite for Hard Tissue Engineering Applications [Volume 35, Issue 3, 2016, Pages 13-28]
Shafyei, A. Effect of Deep Cryogenic Treatment on Hardness and Wear Behavior of 5120 AISI Steel [Volume 35, Issue 3, 2016, Pages 57-67]
Shafyei, A. Effect of Deep Cryogenic Treatment on Hardness and Wear Behavior of 5120 AISI Steel [Volume 35, Issue 3, 2016, Pages 57-67]
Shafyei, A. Evaluating the Properties of High-Temperature and Low-Temperature Wear of TiN Coatings Deposited at Different Temperatures [Volume 35, Issue 4, 2017, Pages 91-100]
Shafyei, A. Evaluating the Properties of High-Temperature and Low-Temperature Wear of TiN Coatings Deposited at Different Temperatures [Volume 35, Issue 4, 2017, Pages 91-100]
Shahriari Nogorani, F. Formation and Microstructural Characterization of Co-DepositedSilicon Aluminide Coating Produced by Pack Cementation Process at High Temperature [Volume 35, Issue 4, 2017, Pages 113-125]
Shahverdi, H. Characterization of Al-CNT Composite Nanoparticles Synthesized by Electrical Explosion of Wire in Acetone [Volume 35, Issue 2, 2016, Pages 47-53]
Shahverdi, H. R. Effects of Nb on Increasing Glass Form Ability in Fe- based Amorphous Alloys of Fe55-xCr18Mo7B16C4Nbx (X=0, 3, 4, 5) [Volume 35, Issue 2, 2016, Pages 67-81]
Shamanian, M. Electrodeposition and Characterization of Nanocrystalline Nickel- Molybdenum Alloy [Volume 35, Issue 1, 2016, Pages 71-81]
Shamsi, M. Synthesis and Characterization of Silicate Calcium Phosphate Bioactive Glass Prepared by Electrospinning Method [Volume 35, Issue 1, 2016, Pages 57-69]
Sharifi, H. Preparation and characterization of the solâgel nano-bioactive glasses modiïed by the coupling agent 3-(Trimethoxysilyl) Propyl methacrylate [Volume 35, Issue 1, 2016, Pages 23-33]
Shirinparvar, S. Synthesis of La3+ and Nd3+ co-Doped Yttria Nanopowder by Sol-Gel Combustion Method [Volume 35, Issue 4, 2017, Pages 1-11]
Shoja Razavi, R. Evaluation of Hydrogen Damage in Aluminum 7075 Alloy after Dissolution Annealing and Two-stage Aging [Volume 35, Issue 1, 2016, Pages 1-10]
Sobhani, R. Effect of Preparation Method on Phase Formation Process and Structural and Magnetic Properties of Mn2.5Ge Samples [Volume 35, Issue 3, 2016, Pages 45-56]
T
Tahavvori, R. Investigating Formation of Intermetallics in Compound Casting of Al/Cu Bimetals [Volume 35, Issue 2, 2016, Pages 115-129]
Tahmasebi, M. H. Study on the Effect of Annealing Process on Microstructure and Electrochemical Behavior of the Binary Mn-Ni Nano-Oxide Pseudocapacitor Synthesized by Anodic Deposition [Volume 35, Issue 3, 2016, Pages 107-121]
Tavassoli, S. Investigating Formation of Intermetallics in Compound Casting of Al/Cu Bimetals [Volume 35, Issue 2, 2016, Pages 115-129]
Tirgir, F. Preparation and characterization of the solâgel nano-bioactive glasses modiïed by the coupling agent 3-(Trimethoxysilyl) Propyl methacrylate [Volume 35, Issue 1, 2016, Pages 23-33]
Tirgir Malkhlifeh, F. A Comparative Study of the Addition Effect of Diopside and Silica Sulfuric Acid Nanoparticles on Mechanical Properties of Glass Ionomer Cements [Volume 35, Issue 2, 2016, Pages 131-144]
Torkian, S. Effect of Deep Cryogenic Treatment on Hardness and Wear Behavior of 5120 AISI Steel [Volume 35, Issue 3, 2016, Pages 57-67]
Toroghinejad, M.R. Effect of Deep Cryogenic Treatment on Hardness and Wear Behavior of 5120 AISI Steel [Volume 35, Issue 3, 2016, Pages 57-67]
Toroghinejad, M.R. Effect of Deep Cryogenic Treatment on Hardness and Wear Behavior of 5120 AISI Steel [Volume 35, Issue 3, 2016, Pages 57-67]
V
Vicenzo, A. Study on the Effect of Annealing Process on Microstructure and Electrochemical Behavior of the Binary Mn-Ni Nano-Oxide Pseudocapacitor Synthesized by Anodic Deposition [Volume 35, Issue 3, 2016, Pages 107-121]
Y
Yazdani, D. Effect of Stone-Wales Defect on Ultimate Strength of Carbon Nanotubes [Volume 35, Issue 1, 2016, Pages 83-97]
Yousefi, M.H. The Effect of Magnesium Substitution and Sintering Temperature on the Structural and Magnetic Properties of Manganese- Magnesium Ferrite [Volume 35, Issue 3, 2016, Pages 81-94]
Z
Zamanian, A. Synthesis and Characterization of Silicate Calcium Phosphate Bioactive Glass Prepared by Electrospinning Method [Volume 35, Issue 1, 2016, Pages 57-69]
Zaroodi, J. Investigation of Tantalum Cation Doped Ba (Co0.8Fe0.2) O3âδ Perovskite Phase [Volume 35, Issue 1, 2016, Pages 47-55]
Zavareh, S. Synthesis and Characterization of Silicate Calcium Phosphate Bioactive Glass Prepared by Electrospinning Method [Volume 35, Issue 1, 2016, Pages 57-69]
Zebarjad, S.M. Fabrication of AA356/SiCp Aluminum Composite Foam via In-Situ Foaming Route of Melt using CaCO3 Foaming Agent and an Investigation of its Compressive Properties [Volume 35, Issue 4, 2017, Pages 51-68]
