Ahl Sarmadi, M. Friction Stir Welding of Super Duplex Stainless Steel of UNS S32750, Its Microstructure Evaluation, Mechanical and Corrosion Properties [Volume 36, Issue 1, 2017, Pages 97-120]
Ahmadi, H. The Effect of Nano-magnesia Addition on the Properties of Magnesite-hercynite Refractory Bricks Made with the Use of Convertor Mud [Volume 36, Issue 2, 2017, Pages 95-106]
Ahmadian, M. The Wear Behavior of WC-Co and WC-FeAl-B Composites at Temperatures of Ambient and 300 ÌC [Volume 36, Issue 1, 2017, Pages 1-12]
Akbari, A. R. Kinetics of Austenite Layer Growth on the Surface of Fe-23Cr-2.4Mo Ferritic Stainless Steel During Solution Nitriding [Volume 36, Issue 2, 2017, Pages 55-66]
Akbari, G. H. Evaluation of Synthesizing Al2O3 Nano Particles in Copper Matrix by Mechanical Alloying of Cu-1% Al and Copper Oxide [Volume 36, Issue 1, 2017, Pages 71-85]
Akbari, G. H. Evaluation of Synthesizing Al2O3 Nano Particles in Copper Matrix by Mechanical Alloying of Cu-1% Al and Copper Oxide [Volume 36, Issue 1, 2017, Pages 71-85]
Akbari, M. Synthesis and Characterization of FeAl/Al2O3 Nanocomposite Coating on Carbon Steel Plate by High Energy Mechanical Alloying [Volume 36, Issue 2, 2017, Pages 107-117]
Akbarzadeh, F. Z. Effect of Milling Time and 25Ce-75Ni Addition on Hydrogen Desorption Properties of Magnesium Hydride-based Composite Produced by Mechanical Alloying [Volume 36, Issue 4, 2018, Pages 31-43]
Alamolhoda, S. Evaluating Phase Constituents, Magnetic Properties and Microstructure of Nickel Ferrite Nanoparticles Synthesized by Sol-Gel Auto-Combustion [Volume 36, Issue 2, 2017, Pages 47-54]
Alizadeh, A. Synthesis and Characterisation of Al-Zn-Mg /3 wt. %Al2O3 Nanostructured Composite using a Pre-milled Matrix Through Mechanical Alloying [Volume 36, Issue 2, 2017, Pages 1-13]
Alizadeh, M. Synthesis and Characterisation of Al-Zn-Mg /3 wt. %Al2O3 Nanostructured Composite using a Pre-milled Matrix Through Mechanical Alloying [Volume 36, Issue 2, 2017, Pages 1-13]
Amiri Moghaddam, A. In-situ Synthesis of WC-Co Composite in WO3- Co3O4- C System by Carbothermic Reduction Method [Volume 36, Issue 1, 2017, Pages 121-130]
Amirjani, A. Polyol as a Tunable Method for Synthesizing Null and One-dimensional Ag and Ag-Cu Nanostructures [Volume 36, Issue 4, 2018, Pages 117-126]
Asadrokht, M. Kinetics of Copper Cementation by Aluminum Powder from Sulfate Solution under Ball Milling Conditions [Volume 36, Issue 1, 2017, Pages 87-96]
Asghari, A. Study of Structural, Morphological and Optical Properties of Magnesium Hydroxide Nanoplates Synthesized by Precipitation Route [Volume 36, Issue 4, 2018, Pages 59-67]
Asghari, S. Analysis of Pulsed Laser Welding Parameters Effect on Weld Geometry of 316L Stainless Steel using DOE [Volume 36, Issue 4, 2018, Pages 105-116]
Ashrafizade, F. Preparation and Optimization of Alumina Templates for Synthesis of Strontium Ferrite Nanowires and Comparing them with Strontium Ferrite Nanopowders Synthesized with Sol Gel Method [Volume 36, Issue 3, 2017, Pages 11-22]
Ashrafizadeh, S. F. Analysis of the Aging Process and Fatigue Behavior of 17-4 PH Stainless Steel [Volume 36, Issue 2, 2017, Pages 81-93]
Askari, M. Evaluation of Microstructure and Magnetic Properties of Cobalt-based Amorphous Alloy Co70B20Si5Fe4Mo1 Produced by Melt Spinning and Mechanical Alloying [Volume 36, Issue 1, 2017, Pages 131-144]
Atapoor, M. Friction Stir Welding of Super Duplex Stainless Steel of UNS S32750, Its Microstructure Evaluation, Mechanical and Corrosion Properties [Volume 36, Issue 1, 2017, Pages 97-120]
Azadrooy, D. The Microstructural Study of in Situ Al Alloy 319 Based Composite Reinforced by Iron-Based Intermetallic Produced by Stir Casting Process [Volume 36, Issue 3, 2017, Pages 111-126]
B
Bakhshi, M. H. Electrowinning of Nickel from Dilute Sulfate Solution [Volume 36, Issue 4, 2018, Pages 89-103]
Bakhshi, S. R. Preparation and Optimization of Alumina Templates for Synthesis of Strontium Ferrite Nanowires and Comparing them with Strontium Ferrite Nanopowders Synthesized with Sol Gel Method [Volume 36, Issue 3, 2017, Pages 11-22]
Bakhtiari, H. Effect of Standoff Distance and Explosive Material Thickness on Properties of Explosively Welded Copper and 304 Stainless Steel [Volume 36, Issue 3, 2017, Pages 35-50]
Barati, M. Evaluation of Temperature Distribution in Thermal Forming Process of Steel Plate by Oxy-gas Source Line Heating [Volume 36, Issue 1, 2017, Pages 53-70]
Bazdar, F. The Effect of Annealing Temperature on the Structural, Magnetic and Dielectric Properties of PbFe11.8Ni0.2O19 Nanoparticles [Volume 36, Issue 2, 2017, Pages 67-80]
Behjat, A. Friction Stir Welding of Super Duplex Stainless Steel of UNS S32750, Its Microstructure Evaluation, Mechanical and Corrosion Properties [Volume 36, Issue 1, 2017, Pages 97-120]
Benvidi, N. Evaluating Phase Constituents, Magnetic Properties and Microstructure of Nickel Ferrite Nanoparticles Synthesized by Sol-Gel Auto-Combustion [Volume 36, Issue 2, 2017, Pages 47-54]
Borhani, G. H. The Function of Al2O3-TiB2/Fe Composite Reinforcements in Aluminum Matrix Composites [Volume 36, Issue 1, 2017, Pages 23-35]
Bozorgmehr, M. Evaluation of Microstructure and Magnetic Properties of Cobalt-based Amorphous Alloy Co70B20Si5Fe4Mo1 Produced by Melt Spinning and Mechanical Alloying [Volume 36, Issue 1, 2017, Pages 131-144]
C
Chavilian, H. Investigation of Hot Deformation Behavior of 321 Stainless Steel using Hot Compression Test and Modeling with Constitutive Equations [Volume 36, Issue 3, 2017, Pages 63-72]
D
Daneshvar e Asl, S. Structural and Physical Properties of TiO2/CNT Nanocomposite Thin Films Synthesized by Sol-Gel Dip Coating Method for Using in Dye-Sensitized Solar Cell [Volume 36, Issue 3, 2017, Pages 101-109]
Dehghani Varnamkhasti, A. The Effect of Nano-magnesia Addition on the Properties of Magnesite-hercynite Refractory Bricks Made with the Use of Convertor Mud [Volume 36, Issue 2, 2017, Pages 95-106]
E
Ebrahimi, F. Preparation and Optimization of Alumina Templates for Synthesis of Strontium Ferrite Nanowires and Comparing them with Strontium Ferrite Nanopowders Synthesized with Sol Gel Method [Volume 36, Issue 3, 2017, Pages 11-22]
Edris, H. Friction Stir Welding of Super Duplex Stainless Steel of UNS S32750, Its Microstructure Evaluation, Mechanical and Corrosion Properties [Volume 36, Issue 1, 2017, Pages 97-120]
Enayati, M. H. Synthesis and Characterization of FeAl/Al2O3 Nanocomposite Coating on Carbon Steel Plate by High Energy Mechanical Alloying [Volume 36, Issue 2, 2017, Pages 107-117]
Esmaeilzadeh, M. K. Static and Dynamic Magnetic Properties of La0.8Sr0.2MnO3 Nanoparticles [Volume 36, Issue 3, 2017, Pages 23-34]
F
Farjam Hajiagha, Kh. Kinetics of Austenite Layer Growth on the Surface of Fe-23Cr-2.4Mo Ferritic Stainless Steel During Solution Nitriding [Volume 36, Issue 2, 2017, Pages 55-66]
Farmanesh, K. Investigation of Hot Deformation Behavior of 321 Stainless Steel using Hot Compression Test and Modeling with Constitutive Equations [Volume 36, Issue 3, 2017, Pages 63-72]
Fathi, M. Poly (hydroxybutyrate co hydroxyvalerate) Nanofibrous Scaffold Containing HydroxyapatiteBredigite Nanoparticles: Characterization and Biological Evaluation [Volume 36, Issue 3, 2017, Pages 87-99]
Fazlali, A. R. Preparation of Lithium Ion Conductor Glass-Ceramic with High Conductivity for Producing Lithium-Air and all-Solid-State Lithium-Ion Batteries [Volume 36, Issue 1, 2017, Pages 37-52]
G
Ghasemi, B. Study of Structural, Morphological and Optical Properties of Magnesium Hydroxide Nanoplates Synthesized by Precipitation Route [Volume 36, Issue 4, 2018, Pages 59-67]
Goodarzi, M. Thermodynamic Description of the TiâO System using the Ionic Liquid Model for the Liquid Phase [Volume 36, Issue 3, 2017, Pages 73-85]
H
Haghshenas, D. Polyol as a Tunable Method for Synthesizing Null and One-dimensional Ag and Ag-Cu Nanostructures [Volume 36, Issue 4, 2018, Pages 117-126]
Hajizamani, M. Synthesis and Characterisation of Al-Zn-Mg /3 wt. %Al2O3 Nanostructured Composite using a Pre-milled Matrix Through Mechanical Alloying [Volume 36, Issue 2, 2017, Pages 1-13]
Hosseini, S. R. Evaluation of Temperature Distribution in Thermal Forming Process of Steel Plate by Oxy-gas Source Line Heating [Volume 36, Issue 1, 2017, Pages 53-70]
Hosseinzadeh, M. Evaluation of Microstructure and Magnetic Properties of Cobalt-based Amorphous Alloy Co70B20Si5Fe4Mo1 Produced by Melt Spinning and Mechanical Alloying [Volume 36, Issue 1, 2017, Pages 131-144]
I
Illbeigi, M. Preparation of Lithium Ion Conductor Glass-Ceramic with High Conductivity for Producing Lithium-Air and all-Solid-State Lithium-Ion Batteries [Volume 36, Issue 1, 2017, Pages 37-52]
J
Jafarian, M. Influence of Fe/Ba Molar Ratio on Phase Composition, Synthesis Temperature, Microstructure and Magnetic Properties of Barium Hexaferrite [Volume 36, Issue 1, 2017, Pages 13-22]
Jenabali-Jahromi, S.A. Synthesis and Characterisation of Al-Zn-Mg /3 wt. %Al2O3 Nanostructured Composite using a Pre-milled Matrix Through Mechanical Alloying [Volume 36, Issue 2, 2017, Pages 1-13]
K
Kafili, G. Optimization of Slip Casting Parameters of Alumina Yttria Nanocomposite Powder for Obtaining Transparent Yttrium Aluminum Garnet Ceramics [Volume 36, Issue 3, 2017, Pages 51-62]
Karimzadeh, F. Synthesis and Characterization of FeAl/Al2O3 Nanocomposite Coating on Carbon Steel Plate by High Energy Mechanical Alloying [Volume 36, Issue 2, 2017, Pages 107-117]
Kazazi, M. Preparation of Lithium Ion Conductor Glass-Ceramic with High Conductivity for Producing Lithium-Air and all-Solid-State Lithium-Ion Batteries [Volume 36, Issue 1, 2017, Pages 37-52]
Khanzadeh Gharah Shiran, M.R. Effect of Standoff Distance and Explosive Material Thickness on Properties of Explosively Welded Copper and 304 Stainless Steel [Volume 36, Issue 3, 2017, Pages 35-50]
Khoobroo, M. Improving the Surface Properties of Gray Cast Iron through In-Situ Alloying [Volume 36, Issue 3, 2017, Pages 1-10]
Kouhi, M. Poly (hydroxybutyrate co hydroxyvalerate) Nanofibrous Scaffold Containing HydroxyapatiteBredigite Nanoparticles: Characterization and Biological Evaluation [Volume 36, Issue 3, 2017, Pages 87-99]
M
Maghsoudi, E. Evaluation of Temperature Distribution in Thermal Forming Process of Steel Plate by Oxy-gas Source Line Heating [Volume 36, Issue 1, 2017, Pages 53-70]
Maghsoudi, E. Investigation of Hot Deformation Behavior of 321 Stainless Steel using Hot Compression Test and Modeling with Constitutive Equations [Volume 36, Issue 3, 2017, Pages 63-72]
Mahmoodi, M. Effect of Hydroxyapatite Nanoparticles on Properties of Keratin/Poly Caprolactone Nanofibers for Tissue Engineering [Volume 36, Issue 4, 2018, Pages 45-57]
Maleki, A. Improving the Surface Properties of Gray Cast Iron through In-Situ Alloying [Volume 36, Issue 3, 2017, Pages 1-10]
Meratian, M. Investigating the Effect of Equal Channel Angular Extrusion on Microstructure and Mechanical Properties of the 60-40 Two-phase Brass Alloy [Volume 36, Issue 4, 2018, Pages 21-29]
Milani, M. Effect of Ion Concentration on Viscosity of Doped Alumina Suspensions for Electrophoretic Deposition [Volume 36, Issue 2, 2017, Pages 119-130]
Milani, M. Optimization of Slip Casting Parameters of Alumina Yttria Nanocomposite Powder for Obtaining Transparent Yttrium Aluminum Garnet Ceramics [Volume 36, Issue 3, 2017, Pages 51-62]
Mirhaj, M. Effect of Hydroxyapatite Nanoparticles on Properties of Keratin/Poly Caprolactone Nanofibers for Tissue Engineering [Volume 36, Issue 4, 2018, Pages 45-57]
Mirkazemi, S. M. Evaluating Phase Constituents, Magnetic Properties and Microstructure of Nickel Ferrite Nanoparticles Synthesized by Sol-Gel Auto-Combustion [Volume 36, Issue 2, 2017, Pages 47-54]
Mirkazemi, S. M. Effect of Ion Concentration on Viscosity of Doped Alumina Suspensions for Electrophoretic Deposition [Volume 36, Issue 2, 2017, Pages 119-130]
Mohammadi, A. H. Preparation of Lithium Ion Conductor Glass-Ceramic with High Conductivity for Producing Lithium-Air and all-Solid-State Lithium-Ion Batteries [Volume 36, Issue 1, 2017, Pages 37-52]
Mohammad Javadi, M. Effect of Standoff Distance and Explosive Material Thickness on Properties of Explosively Welded Copper and 304 Stainless Steel [Volume 36, Issue 3, 2017, Pages 35-50]
MohammadPoor, P. Thermodynamic Description of the TiâO System using the Ionic Liquid Model for the Liquid Phase [Volume 36, Issue 3, 2017, Pages 73-85]
Mohammadzadeh, R. Kinetics of Austenite Layer Growth on the Surface of Fe-23Cr-2.4Mo Ferritic Stainless Steel During Solution Nitriding [Volume 36, Issue 2, 2017, Pages 55-66]
Mohtadi Bonab, M. Friction Stir Welding of Super Duplex Stainless Steel of UNS S32750, Its Microstructure Evaluation, Mechanical and Corrosion Properties [Volume 36, Issue 1, 2017, Pages 97-120]
Mostaan, H. The Effect of Filler Metal on Properties of AISI 4130 to AISI 316L Dissimilar Joint [Volume 36, Issue 2, 2017, Pages 33-46]
Mottaghi, M. The Wear Behavior of WC-Co and WC-FeAl-B Composites at Temperatures of Ambient and 300 ÌC [Volume 36, Issue 1, 2017, Pages 1-12]
Mousavi, S. E. Investigating the Effect of Equal Channel Angular Extrusion on Microstructure and Mechanical Properties of the 60-40 Two-phase Brass Alloy [Volume 36, Issue 4, 2018, Pages 21-29]
Mousavi Ghahfarokhi, S. E. The Effect of Annealing Temperature on the Structural, Magnetic and Dielectric Properties of PbFe11.8Ni0.2O19 Nanoparticles [Volume 36, Issue 2, 2017, Pages 67-80]
Movahedi, B. Optimization of Slip Casting Parameters of Alumina Yttria Nanocomposite Powder for Obtaining Transparent Yttrium Aluminum Garnet Ceramics [Volume 36, Issue 3, 2017, Pages 51-62]
N
Nilforushan, M. R. The Effect of Nano-magnesia Addition on the Properties of Magnesite-hercynite Refractory Bricks Made with the Use of Convertor Mud [Volume 36, Issue 2, 2017, Pages 95-106]
Niroumand, B. Optimization of Surface Mechanical Properties and Characterization of AZ31B/CNT Nano-composite through Friction Stir Processing (FSP) using Response Surface Methodology (RSM) Design of Experiment [Volume 36, Issue 2, 2017, Pages 15-32]
Niroumand, B. Optimization of Surface Mechanical Properties and Characterization of AZ31B/CNT Nano-composite through Friction Stir Processing (FSP) using Response Surface Methodology (RSM) Design of Experiment [Volume 36, Issue 2, 2017, Pages 15-32]
Niroumand, B. Improving the Surface Properties of Gray Cast Iron through In-Situ Alloying [Volume 36, Issue 3, 2017, Pages 1-10]
Norouzbeigi, R. Evaluation of the Effect of Polyethylene Glycol Addition on the Wetting Properties of ZnO Superhydrophobic Surfaces Prepared via Chemical Bath Deposition Method [Volume 36, Issue 4, 2018, Pages 69-88]
O
Otroj, S. The Effect of Nano-magnesia Addition on the Properties of Magnesite-hercynite Refractory Bricks Made with the Use of Convertor Mud [Volume 36, Issue 2, 2017, Pages 95-106]
P
Pakmanesh, M. R. Analysis of Pulsed Laser Welding Parameters Effect on Weld Geometry of 316L Stainless Steel using DOE [Volume 36, Issue 4, 2018, Pages 105-116]
Poorkabirian, M. The Effect of Filler Metal on Properties of AISI 4130 to AISI 316L Dissimilar Joint [Volume 36, Issue 2, 2017, Pages 33-46]
Raeissi, K. Electroplating of Ni-Mo Coating on Stainless Steel for Application in Proton Exchange Membrane Fuel Cell Bipolar Plate [Volume 36, Issue 4, 2018, Pages 1-20]
Raeissi, K. Electroplating of Ni-Mo Coating on Stainless Steel for Application in Proton Exchange Membrane Fuel Cell Bipolar Plate [Volume 36, Issue 4, 2018, Pages 1-20]
Rafiei, M. The Effect of Filler Metal on Properties of AISI 4130 to AISI 316L Dissimilar Joint [Volume 36, Issue 2, 2017, Pages 33-46]
Rajabi, M. Effect of Milling Time and 25Ce-75Ni Addition on Hydrogen Desorption Properties of Magnesium Hydride-based Composite Produced by Mechanical Alloying [Volume 36, Issue 4, 2018, Pages 31-43]
Rashtchi, H. Electroplating of Ni-Mo Coating on Stainless Steel for Application in Proton Exchange Membrane Fuel Cell Bipolar Plate [Volume 36, Issue 4, 2018, Pages 1-20]
Razavi, S. A. Analysis of the Aging Process and Fatigue Behavior of 17-4 PH Stainless Steel [Volume 36, Issue 2, 2017, Pages 81-93]
Razmjou, A. Improvement of Polypropylene Biological Interactions by using Superhydrophobic Surface Modification [Volume 36, Issue 4, 2018, Pages 127-140]
Rezaeian, A. Investigating the Effect of Equal Channel Angular Extrusion on Microstructure and Mechanical Properties of the 60-40 Two-phase Brass Alloy [Volume 36, Issue 4, 2018, Pages 21-29]
Rizaneh, S. The Function of Al2O3-TiB2/Fe Composite Reinforcements in Aluminum Matrix Composites [Volume 36, Issue 1, 2017, Pages 23-35]
Rostamnejadi, A. Static and Dynamic Magnetic Properties of La0.8Sr0.2MnO3 Nanoparticles [Volume 36, Issue 3, 2017, Pages 23-34]
S
Sabooni, S. Synthesis and Characterization of FeAl/Al2O3 Nanocomposite Coating on Carbon Steel Plate by High Energy Mechanical Alloying [Volume 36, Issue 2, 2017, Pages 107-117]
Sadrnezhaad, S. K. Structural and Physical Properties of TiO2/CNT Nanocomposite Thin Films Synthesized by Sol-Gel Dip Coating Method for Using in Dye-Sensitized Solar Cell [Volume 36, Issue 3, 2017, Pages 101-109]
Safi, S. Evaluation of Synthesizing Al2O3 Nano Particles in Copper Matrix by Mechanical Alloying of Cu-1% Al and Copper Oxide [Volume 36, Issue 1, 2017, Pages 71-85]
Saghafian, H. The Microstructural Study of in Situ Al Alloy 319 Based Composite Reinforced by Iron-Based Intermetallic Produced by Stir Casting Process [Volume 36, Issue 3, 2017, Pages 111-126]
Seyyed Afghahi, S. S. Influence of Fe/Ba Molar Ratio on Phase Composition, Synthesis Temperature, Microstructure and Magnetic Properties of Barium Hexaferrite [Volume 36, Issue 1, 2017, Pages 13-22]
Shahjooyi, T. Evaluating Phase Constituents, Magnetic Properties and Microstructure of Nickel Ferrite Nanoparticles Synthesized by Sol-Gel Auto-Combustion [Volume 36, Issue 2, 2017, Pages 47-54]
Shamanian, M. Friction Stir Welding of Super Duplex Stainless Steel of UNS S32750, Its Microstructure Evaluation, Mechanical and Corrosion Properties [Volume 36, Issue 1, 2017, Pages 97-120]
Shamanian, M. Optimization of Surface Mechanical Properties and Characterization of AZ31B/CNT Nano-composite through Friction Stir Processing (FSP) using Response Surface Methodology (RSM) Design of Experiment [Volume 36, Issue 2, 2017, Pages 15-32]
Shamanian, M. Poly (hydroxybutyrate co hydroxyvalerate) Nanofibrous Scaffold Containing HydroxyapatiteBredigite Nanoparticles: Characterization and Biological Evaluation [Volume 36, Issue 3, 2017, Pages 87-99]
Shamanian, M. Electroplating of Ni-Mo Coating on Stainless Steel for Application in Proton Exchange Membrane Fuel Cell Bipolar Plate [Volume 36, Issue 4, 2018, Pages 1-20]
Shamanian, M. Analysis of Pulsed Laser Welding Parameters Effect on Weld Geometry of 316L Stainless Steel using DOE [Volume 36, Issue 4, 2018, Pages 105-116]
Shirani, E. Improvement of Polypropylene Biological Interactions by using Superhydrophobic Surface Modification [Volume 36, Issue 4, 2018, Pages 127-140]
Shybani, A. Effect of Hydroxyapatite Nanoparticles on Properties of Keratin/Poly Caprolactone Nanofibers for Tissue Engineering [Volume 36, Issue 4, 2018, Pages 45-57]
Soltani, M. Optimization of Surface Mechanical Properties and Characterization of AZ31B/CNT Nano-composite through Friction Stir Processing (FSP) using Response Surface Methodology (RSM) Design of Experiment [Volume 36, Issue 2, 2017, Pages 15-32]
Soltanipour, A. Investigation of Hot Deformation Behavior of 321 Stainless Steel using Hot Compression Test and Modeling with Constitutive Equations [Volume 36, Issue 3, 2017, Pages 63-72]
Szpunar, J. Friction Stir Welding of Super Duplex Stainless Steel of UNS S32750, Its Microstructure Evaluation, Mechanical and Corrosion Properties [Volume 36, Issue 1, 2017, Pages 97-120]
T
Tajalli, M. Study of Structural, Morphological and Optical Properties of Magnesium Hydroxide Nanoplates Synthesized by Precipitation Route [Volume 36, Issue 4, 2018, Pages 59-67]
Tavoosi, M. The Function of Al2O3-TiB2/Fe Composite Reinforcements in Aluminum Matrix Composites [Volume 36, Issue 1, 2017, Pages 23-35]
V
Velayi, E. Evaluation of the Effect of Polyethylene Glycol Addition on the Wetting Properties of ZnO Superhydrophobic Surfaces Prepared via Chemical Bath Deposition Method [Volume 36, Issue 4, 2018, Pages 69-88]
Z
Zahraee, S. M. Effect of Ion Concentration on Viscosity of Doped Alumina Suspensions for Electrophoretic Deposition [Volume 36, Issue 2, 2017, Pages 119-130]
Zakeri, A. Electrowinning of Nickel from Dilute Sulfate Solution [Volume 36, Issue 4, 2018, Pages 89-103]
Zakeri, A. R. Kinetics of Copper Cementation by Aluminum Powder from Sulfate Solution under Ball Milling Conditions [Volume 36, Issue 1, 2017, Pages 87-96]
