Abbasi, S. M. The Effect of Mg on Microstructure and High Temperature Mechanical Properties of Hasteloy X Superalloy [Volume 37, Issue 2, 2018, Pages 29-37]
Adeli, M. Investigating the Effect of Ethanol and Ascorbic Acid on Titanium Dioxide Extraction from Ilmenite by Oxalic Acid [Volume 37, Issue 1, 2018, Pages 11-25]
Aghaei, A. Fabrication and Characterization of an Optical Nano-hybrid Sol-gel Derived Thin Film on the PMMA Substrate [Volume 37, Issue 4, 2019, Pages 101-112]
Akbari, B. Structural and Mechanical Evaluation of Polycaprolactone Scaffold with the Gradient Porous Microstructure for Bone Tissue Engineering [Volume 37, Issue 3, 2018, Pages 75-86]
Akbari, Gh. Evaluation of the Microstructure of Ni-Nb-Si Alloy During Mechanical Alloying [Volume 37, Issue 1, 2018, Pages 1-9]
Akbari Taemeh, M. Structural and Mechanical Evaluation of Polycaprolactone Scaffold with the Gradient Porous Microstructure for Bone Tissue Engineering [Volume 37, Issue 3, 2018, Pages 75-86]
Akbarzadeh, M. An Investigation Into the Properties of MoS2-Cr Coatings Produced by DC Magnetron Sputtering [Volume 37, Issue 4, 2019, Pages 25-41]
Alizadeh, M. The Effect of Al2O3 Particles Concentration on the Properties of Ni-Mo-Al2O3 Composite Coatings Fabricated by Electrodeposition [Volume 37, Issue 2, 2018, Pages 49-58]
Allahkaram, S. R. A Comparative Investigation into Corrosion and Wear Properties of Zn-Ni and Zn-Ni/PTFE Coatings [Volume 37, Issue 3, 2018, Pages 49-62]
Amiri, P. First Principeles Initio Study of the Electronic and Optical Properties of Bulk TiC and Its Narrow Nanowires by Density Functional Theory [Volume 37, Issue 1, 2018, Pages 83-96]
Amoohadi, M. An Investigation of the Magnetic Properties of Iron-based Soft Magnetic Composites Coated by Sodium Silicate Insulator [Volume 37, Issue 1, 2018, Pages 97-104]
Arjmand, S. The Formation of Al3Ti Intermetallic compound at the junction interface of Titanium-Aluminum diffusional Coupling by Means of Diffusional Annealing Process [Volume 37, Issue 1, 2018, Pages 37-44]
Ashrafizadeh, F. Investigation of Adhesion and the Load Bearing of CrN-CrAlN Nanostructured Coating by Physical Vapor Deposition [Volume 37, Issue 2, 2018, Pages 81-93]
Askari, M. The Effect of Temperature on the Magnetic Properties of Hard Magnet Nd2Fe14B Produced by Hot Press Method [Volume 37, Issue 2, 2018, Pages 13-27]
B
Baradaran, A. Investigation of the Optical Properties of GeO2-PbO-CaO-SrO Glass System in the Presence of Different Amounts of CaO and SrO [Volume 37, Issue 3, 2018, Pages 107-119]
Barounian, M. H. The Effect of Indomethacin on the Calcium Phosphate/polymer Light-Cured Nanobiocomposites âBehavior [Volume 37, Issue 1, 2018, Pages 45-54]
Bozorgmehr, M. The Effect of Temperature on the Magnetic Properties of Hard Magnet Nd2Fe14B Produced by Hot Press Method [Volume 37, Issue 2, 2018, Pages 13-27]
C
Cheshmpish, A. The Effect of Al2O3 Particles Concentration on the Properties of Ni-Mo-Al2O3 Composite Coatings Fabricated by Electrodeposition [Volume 37, Issue 2, 2018, Pages 49-58]
D
Daneshvar e Asl, S. Two-Phase Rutile/Anatase TiO2 Nanoleafed Nanorod Arrays for Photoelectrochemical Applications [Volume 37, Issue 2, 2018, Pages 69-79]
Darvishi, S. Preparation and Characterization of PDMS-SiO2-CuO Nanocomposite Coating on Stainless Steel and Its Super-hydrophobicity Property [Volume 37, Issue 3, 2018, Pages 1-12]
Dini, Gh. The Effect of pH and Duration of Hydrothermal Process on the Synthesis of Manganese Ferrite Nanoparticles [Volume 37, Issue 1, 2018, Pages 105-111]
E
Ebrahimian-Hosseinabadi, M. Modeling and Mechanical Analysis of Biphasic Calcium Phosphate/Silk Composite Bone Plate for Fractured Tibia Healing [Volume 37, Issue 2, 2018, Pages 59-67]
Ebrahimi far, H. Investigation of Isothermal and Cyclic Oxidation Behavior of Codeposited 430 Ferritic Stainless Steel with Aluminum and Titanium [Volume 37, Issue 3, 2018, Pages 13-23]
Emadi, R. Fabrication and Evaluation of the Mechanical and Bioactivity Properties of a Nano Structure-hardystonite Scaffold by the Space Holder Method [Volume 37, Issue 1, 2018, Pages 55-67]
Emami, N. Modification of Superhydrophilic, Anti-bacterial Polyurethane Polymer with TiO2 Nanoparticles for Medical Devices [Volume 37, Issue 4, 2019, Pages 73-89]
Emamy, M. Grain Growth Kinetics of Magnesium Alloys Containing Aluminum and Rare-Earth Element Gadolinium [Volume 37, Issue 4, 2019, Pages 1-11]
Enayati, M. H. Evaluation of the Microstructure of Ni-Nb-Si Alloy During Mechanical Alloying [Volume 37, Issue 1, 2018, Pages 1-9]
Erfan Niya, H. A study on the Adsorption of Graphene/Graphene Oxideâreinforced Polymer âNanocomposites using Reactive Molecular Dynamics [Volume 37, Issue 3, 2018, Pages 25-47]
Eshaghi, A. Fabrication and Characterization of an Optical Nano-hybrid Sol-gel Derived Thin Film on the PMMA Substrate [Volume 37, Issue 4, 2019, Pages 101-112]
F
Falsafein, M. Investigation of Adhesion and the Load Bearing of CrN-CrAlN Nanostructured Coating by Physical Vapor Deposition [Volume 37, Issue 2, 2018, Pages 81-93]
Faraji, S. The Effect of pH and Duration of Hydrothermal Process on the Synthesis of Manganese Ferrite Nanoparticles [Volume 37, Issue 1, 2018, Pages 105-111]
Firoozi, S. The Effect of Tartrate Ion on the Separation Behavior of Zinc and Cadmium in the Sulfate Solution [Volume 37, Issue 3, 2018, Pages 63-73]
G
Ghadiri, S. Synthesis and Characterization of Nanoporous Calcium Magnesium Silicate and Assessment of the Calcination Temperature Effect on Its Drug Delivery Behavior [Volume 37, Issue 1, 2018, Pages 69-82]
Ghanbari, M. The Effect of Boron and Zirconium on the Microstructure and Mechanical Properties of Cast Fe3Al-Based Alloys [Volume 37, Issue 4, 2019, Pages 43-57]
Gharaati, A. R. An Investigation of the Magnetic Properties of Iron-based Soft Magnetic Composites Coated by Sodium Silicate Insulator [Volume 37, Issue 1, 2018, Pages 97-104]
Ghasemi, A. The Effect of Temperature on the Magnetic Properties of Hard Magnet Nd2Fe14B Produced by Hot Press Method [Volume 37, Issue 2, 2018, Pages 13-27]
Ghorbanzadeh, M. Optimization of the Selective Dissolution of Li from the Spent Li-ion Batteries using Oxalic Acid by a Response Surface Methodology [Volume 37, Issue 3, 2018, Pages 87-105]
Golestanifard, F. The Effect of Rheological Parameters on the Behavior of Silicon Nitride-Starch Slurry Used in Gelcasting Porous Silicon Nitride [Volume 37, Issue 4, 2019, Pages 13-23]
H
Habibi, A. Deposition of Diamond-like Carbon and Carbyne Thin Film by Cathodic Plasma Electrolysis Process [Volume 37, Issue 2, 2018, Pages 39-48]
Habibi, Negar The Effect of Catalyst and Water Content of the Hydrolysis Step on the Physical Properties of Silica Aerogel Dried at the Ambient Pressure [Volume 37, Issue 1, 2018, Pages 27-35]
Haghshenas Fatmesari, D. The Effect of Tartrate Ion on the Separation Behavior of Zinc and Cadmium in the Sulfate Solution [Volume 37, Issue 3, 2018, Pages 63-73]
Haghshenas Gorgani, M. The Effect of Rheological Parameters on the Behavior of Silicon Nitride-Starch Slurry Used in Gelcasting Porous Silicon Nitride [Volume 37, Issue 4, 2019, Pages 13-23]
Hajfarajzadeh, M. Fabrication and Characterization of an Optical Nano-hybrid Sol-gel Derived Thin Film on the PMMA Substrate [Volume 37, Issue 4, 2019, Pages 101-112]
Hassanzadeh-Tabrizi, A. Synthesis and Characterization of Nanoporous Calcium Magnesium Silicate and Assessment of the Calcination Temperature Effect on Its Drug Delivery Behavior [Volume 37, Issue 1, 2018, Pages 69-82]
Hesaraki, S. The Effect of Indomethacin on the Calcium Phosphate/polymer Light-Cured Nanobiocomposites âBehavior [Volume 37, Issue 1, 2018, Pages 45-54]
Hosseinzadeh, M. The Effect of Temperature on the Magnetic Properties of Hard Magnet Nd2Fe14B Produced by Hot Press Method [Volume 37, Issue 2, 2018, Pages 13-27]
J
Jarrahi, Z. The Effect of Boron Addition on the Microstructure, Hardness and Characteristic Temperatures of Cu-12Al-4Ni Memory Alloy Prepared by Mechanical Alloying, Pressing and Rolling [Volume 37, Issue 4, 2019, Pages 59-72]
K
Karimi, Mahin The Effect of Catalyst and Water Content of the Hydrolysis Step on the Physical Properties of Silica Aerogel Dried at the Ambient Pressure [Volume 37, Issue 1, 2018, Pages 27-35]
Karimzadeh, F. Synthesis of Three-dimensional Graphene and Optimization of Its Morphology [Volume 37, Issue 2, 2018, Pages 1-12]
Kazemzadeh, A. The Effect of Indomethacin on the Calcium Phosphate/polymer Light-Cured Nanobiocomposites âBehavior [Volume 37, Issue 1, 2018, Pages 45-54]
Kharaziha, M. Synthesis of Three-dimensional Graphene and Optimization of Its Morphology [Volume 37, Issue 2, 2018, Pages 1-12]
Kharaziha, M. Preparation and Characterization of PDMS-SiO2-CuO Nanocomposite Coating on Stainless Steel and Its Super-hydrophobicity Property [Volume 37, Issue 3, 2018, Pages 1-12]
Kharaziha, M. Preparation and Characterization of PDMS-SiO2-CuO Nanocomposite Coating on Stainless Steel and Its Super-hydrophobicity Property [Volume 37, Issue 3, 2018, Pages 1-12]
Khosroshahi, Z. Synthesis of Three-dimensional Graphene and Optimization of Its Morphology [Volume 37, Issue 2, 2018, Pages 1-12]
L
Lashani Zand, M. Determination of the Modified Hall-Petch Equation Constants and the Relationship Between the Microstructure and Mechanical Properties of AS7U3G Alloy [Volume 37, Issue 4, 2019, Pages 91-100]
M
Mahboubi, F. Deposition of Diamond-like Carbon and Carbyne Thin Film by Cathodic Plasma Electrolysis Process [Volume 37, Issue 2, 2018, Pages 39-48]
Mahdavi, S. A Comparative Investigation into Corrosion and Wear Properties of Zn-Ni and Zn-Ni/PTFE Coatings [Volume 37, Issue 3, 2018, Pages 49-62]
Mahmoudi Saleh Abad, M. Investigation of Isothermal and Cyclic Oxidation Behavior of Codeposited 430 Ferritic Stainless Steel with Aluminum and Titanium [Volume 37, Issue 3, 2018, Pages 13-23]
Maleki, A. Determination of the Modified Hall-Petch Equation Constants and the Relationship Between the Microstructure and Mechanical Properties of AS7U3G Alloy [Volume 37, Issue 4, 2019, Pages 91-100]
Minouei, H. Evaluation of the Microstructure of Ni-Nb-Si Alloy During Mechanical Alloying [Volume 37, Issue 1, 2018, Pages 1-9]
Mirdamadi, Sh. Optimization of the Selective Dissolution of Li from the Spent Li-ion Batteries using Oxalic Acid by a Response Surface Methodology [Volume 37, Issue 3, 2018, Pages 87-105]
Mirkazemi, M. The Effect of Rheological Parameters on the Behavior of Silicon Nitride-Starch Slurry Used in Gelcasting Porous Silicon Nitride [Volume 37, Issue 4, 2019, Pages 13-23]
Mirzaaei ghasabe, H. Optimization of the Selective Dissolution of Li from the Spent Li-ion Batteries using Oxalic Acid by a Response Surface Methodology [Volume 37, Issue 3, 2018, Pages 87-105]
Mirzadeh, H. Grain Growth Kinetics of Magnesium Alloys Containing Aluminum and Rare-Earth Element Gadolinium [Volume 37, Issue 4, 2019, Pages 1-11]
Mohammadpour, V. Investigating the Effect of Ethanol and Ascorbic Acid on Titanium Dioxide Extraction from Ilmenite by Oxalic Acid [Volume 37, Issue 1, 2018, Pages 11-25]
Moradpour, E. An Investigation Into the Properties of MoS2-Cr Coatings Produced by DC Magnetron Sputtering [Volume 37, Issue 4, 2019, Pages 25-41]
Mousavi Khoie, S.M. Deposition of Diamond-like Carbon and Carbyne Thin Film by Cathodic Plasma Electrolysis Process [Volume 37, Issue 2, 2018, Pages 39-48]
Mozaffari, M. An Investigation of the Magnetic Properties of Iron-based Soft Magnetic Composites Coated by Sodium Silicate Insulator [Volume 37, Issue 1, 2018, Pages 97-104]
N
Nadimi, H. The Effect of Tartrate Ion on the Separation Behavior of Zinc and Cadmium in the Sulfate Solution [Volume 37, Issue 3, 2018, Pages 63-73]
Nemati, Sh. Preparation and Characterization of PDMS-SiO2-CuO Nanocomposite Coating on Stainless Steel and Its Super-hydrophobicity Property [Volume 37, Issue 3, 2018, Pages 1-12]
Niroumand, B. Determination of the Modified Hall-Petch Equation Constants and the Relationship Between the Microstructure and Mechanical Properties of AS7U3G Alloy [Volume 37, Issue 4, 2019, Pages 91-100]
Niroumand, B. Determination of the Modified Hall-Petch Equation Constants and the Relationship Between the Microstructure and Mechanical Properties of AS7U3G Alloy [Volume 37, Issue 4, 2019, Pages 91-100]
Noorisafa, F. Modification of Superhydrophilic, Anti-bacterial Polyurethane Polymer with TiO2 Nanoparticles for Medical Devices [Volume 37, Issue 4, 2019, Pages 73-89]
Nourmohammadi, J. Structural and Mechanical Evaluation of Polycaprolactone Scaffold with the Gradient Porous Microstructure for Bone Tissue Engineering [Volume 37, Issue 3, 2018, Pages 75-86]
P
Panahi Moghadam, A. The Effect of Mg on Microstructure and High Temperature Mechanical Properties of Hasteloy X Superalloy [Volume 37, Issue 2, 2018, Pages 29-37]
Pishevarz, G. A study on the Adsorption of Graphene/Graphene Oxideâreinforced Polymer âNanocomposites using Reactive Molecular Dynamics [Volume 37, Issue 3, 2018, Pages 25-47]
Pourabdoli, M. The Effect of Boron Addition on the Microstructure, Hardness and Characteristic Temperatures of Cu-12Al-4Ni Memory Alloy Prepared by Mechanical Alloying, Pressing and Rolling [Volume 37, Issue 4, 2019, Pages 59-72]
Pourbahari, B. Grain Growth Kinetics of Magnesium Alloys Containing Aluminum and Rare-Earth Element Gadolinium [Volume 37, Issue 4, 2019, Pages 1-11]
R
Rajabi, M. The Effect of Boron and Zirconium on the Microstructure and Mechanical Properties of Cast Fe3Al-Based Alloys [Volume 37, Issue 4, 2019, Pages 43-57]
Raygan, Sh. The Effect of Boron Addition on the Microstructure, Hardness and Characteristic Temperatures of Cu-12Al-4Ni Memory Alloy Prepared by Mechanical Alloying, Pressing and Rolling [Volume 37, Issue 4, 2019, Pages 59-72]
Razmjou, A. Modification of Superhydrophilic, Anti-bacterial Polyurethane Polymer with TiO2 Nanoparticles for Medical Devices [Volume 37, Issue 4, 2019, Pages 73-89]
Rezazadeh, M. An Investigation of the Magnetic Properties of Iron-based Soft Magnetic Composites Coated by Sodium Silicate Insulator [Volume 37, Issue 1, 2018, Pages 97-104]
S
Sadeghzade, S. Fabrication and Evaluation of the Mechanical and Bioactivity Properties of a Nano Structure-hardystonite Scaffold by the Space Holder Method [Volume 37, Issue 1, 2018, Pages 55-67]
Sadrnezhaad, S. Kh. Two-Phase Rutile/Anatase TiO2 Nanoleafed Nanorod Arrays for Photoelectrochemical Applications [Volume 37, Issue 2, 2018, Pages 69-79]
Salehi, H. First Principeles Initio Study of the Electronic and Optical Properties of Bulk TiC and Its Narrow Nanowires by Density Functional Theory [Volume 37, Issue 1, 2018, Pages 83-96]
Seifollahi, M. The Effect of Mg on Microstructure and High Temperature Mechanical Properties of Hasteloy X Superalloy [Volume 37, Issue 2, 2018, Pages 29-37]
Shahmiri, M. The Effect of Boron and Zirconium on the Microstructure and Mechanical Properties of Cast Fe3Al-Based Alloys [Volume 37, Issue 4, 2019, Pages 43-57]
Shams, S. F. Modeling and Mechanical Analysis of Biphasic Calcium Phosphate/Silk Composite Bone Plate for Fractured Tibia Healing [Volume 37, Issue 2, 2018, Pages 59-67]
Soltanieh, M. Investigating the Effect of Ethanol and Ascorbic Acid on Titanium Dioxide Extraction from Ilmenite by Oxalic Acid [Volume 37, Issue 1, 2018, Pages 11-25]
T
Tafreshi, M. A Comparative Investigation into Corrosion and Wear Properties of Zn-Ni and Zn-Ni/PTFE Coatings [Volume 37, Issue 3, 2018, Pages 49-62]
Talebi, Z. The Effect of Catalyst and Water Content of the Hydrolysis Step on the Physical Properties of Silica Aerogel Dried at the Ambient Pressure [Volume 37, Issue 1, 2018, Pages 27-35]
Tavakoli dehaghi, Sh. Preparation and Characterization of PDMS-SiO2-CuO Nanocomposite Coating on Stainless Steel and Its Super-hydrophobicity Property [Volume 37, Issue 3, 2018, Pages 1-12]
Tavoosi, M. The Formation of Al3Ti Intermetallic compound at the junction interface of Titanium-Aluminum diffusional Coupling by Means of Diffusional Annealing Process [Volume 37, Issue 1, 2018, Pages 37-44]
Tavoosi, M. Investigation of the Optical Properties of GeO2-PbO-CaO-SrO Glass System in the Presence of Different Amounts of CaO and SrO [Volume 37, Issue 3, 2018, Pages 107-119]
V
Vahedi, A. The Effect of Tartrate Ion on the Separation Behavior of Zinc and Cadmium in the Sulfate Solution [Volume 37, Issue 3, 2018, Pages 63-73]
Z
Zahraei, M. The Effect of pH and Duration of Hydrothermal Process on the Synthesis of Manganese Ferrite Nanoparticles [Volume 37, Issue 1, 2018, Pages 105-111]
Zakeri, A. Optimization of the Selective Dissolution of Li from the Spent Li-ion Batteries using Oxalic Acid by a Response Surface Methodology [Volume 37, Issue 3, 2018, Pages 87-105]
Zaminpayma, E. A study on the Adsorption of Graphene/Graphene Oxideâreinforced Polymer âNanocomposites using Reactive Molecular Dynamics [Volume 37, Issue 3, 2018, Pages 25-47]
Zandrahimi, M. Investigation of Isothermal and Cyclic Oxidation Behavior of Codeposited 430 Ferritic Stainless Steel with Aluminum and Titanium [Volume 37, Issue 3, 2018, Pages 13-23]
Zandrahimi, M. An Investigation Into the Properties of MoS2-Cr Coatings Produced by DC Magnetron Sputtering [Volume 37, Issue 4, 2019, Pages 25-41]
