Aashuri, H. The Effect of Temperature on the Fracture Surface Morphology and Ductility of La55Al25Ni5Cu10Co5 BMG [Volume 38, Issue 2, 2019, Pages 11-24]
Abbasi, M. Fabrication of Poly(ε-Caprolactone), Hydrophilic and β-Tricalcium Phosphate Layer- by -Layer Nanofibrous Scaffolds for Tissue Engineering [Volume 38, Issue 1, 2019, Pages 23-35]
Abbasi, S. M. Flow Behavior of SP-700 Titanium Alloy During Hot Tensile Deformation in α+β and β Phase Regions [Volume 38, Issue 1, 2019, Pages 37-48]
Abbasi, S. M. Hot Deformation Behavior of Haynes 25 by the Hot Tensile Test [Volume 38, Issue 2, 2019, Pages 1-10]
Abbasi, S. M. The Effect of Platinum Layer and Aluminizing Process on Surface Roughness of Coated Superalloy by Pt-Al [Volume 38, Issue 2, 2019, Pages 35-53]
Abdollahzadeh, A. Boriding of In-738 Superalloy via the Pack Cementation Method and the Study of the Kinetic of Boride Layer Formation [Volume 38, Issue 1, 2019, Pages 76-86]
Afrashi, M. Adsorption of Fluconazole Drug on Silica Aerogelâ by Immersion Method and Investigation of the Rate and Mechanism of Drug Release [Volume 38, Issue 2, 2019, Pages 25-34]
Aghaei, A. Fabrication of MgF2-SiO2 Nanocomposite Thin Films and Investigation of Their Optical and Hydrophobic Properties [Volume 38, Issue 2, 2019, Pages 91-104]
Alhaji, A. Effect of Calcination Temperature and Li / TFA Molar Ratio on Morphology and Phase of Lithium Fluoride Nanoparticles Produced by Fluorolytic Sol-Gel Method [Volume 38, Issue 3, 2019, Pages 29-39]
Alhaji, A. Effect of Chelating Agent on Morphology and Phase Evolution of Spinel Nanoparticles Synthesized via Sol-Gel Method [Volume 38, Issue 4, 2020, Pages 33-42]
Alipour Mogadam, R. Mechanical Properties and Spring -Back Investigation in Creep Age Forming Process of 7075 Al Alloy [Volume 38, Issue 2, 2019, Pages 55-67]
Alirezaei Varnosfaderani, N. Effect of Annealing Temperature on the Structural, Magnetic and Optical Properties of SrCo2Fe16O27 Hexaferrite Nanostructure [Volume 38, Issue 3, 2019, Pages 41-55]
Amanpour, S. Investigating the Release of Methotrexate and 5-Fluorouracil Anticancer Drugs from Multi-Layered Nanofiber Structure of Polycaprolactone/Chitosan [Volume 38, Issue 4, 2020, Pages 1-17]
Amiri, P. Ab-Initio Study of Optical and Magnetic Properties of Tungsten Disulfide [Volume 38, Issue 4, 2020, Pages 43-50]
Ansar, M. M Fabrication of Poly(ε-Caprolactone), Hydrophilic and β-Tricalcium Phosphate Layer- by -Layer Nanofibrous Scaffolds for Tissue Engineering [Volume 38, Issue 1, 2019, Pages 23-35]
Asadi Khanouki, M. T. The Effect of Temperature on the Fracture Surface Morphology and Ductility of La55Al25Ni5Cu10Co5 BMG [Volume 38, Issue 2, 2019, Pages 11-24]
Ashrafizadeh, F. Corrosion Fatigue of 17-4pH Stainless Steel in a Simulated Sea Water Solution [Volume 38, Issue 2, 2019, Pages 69-81]
B
Bahrami, A. Investigating the Joining of Ni3Al Intermetallic Compound, using Transient Liquid Phase (TLP) Method with Cu Interlayer [Volume 38, Issue 4, 2020, Pages 19-31]
Barjesteh, M. The Effect of Platinum Layer and Aluminizing Process on Surface Roughness of Coated Superalloy by Pt-Al [Volume 38, Issue 2, 2019, Pages 35-53]
D
Dabir, F. Boriding of In-738 Superalloy via the Pack Cementation Method and the Study of the Kinetic of Boride Layer Formation [Volume 38, Issue 1, 2019, Pages 76-86]
Darudi, A. Preparation and Characterization of Cerium Doped Titanium Dioxide Nanoparticles by the Electrical Discharge Method [Volume 38, Issue 2, 2019, Pages 83-90]
E
Ebrahimifar, H. Oxidation and Electrical Behavior of Crofer 22APU Steel with the Co/Y2O3 Coating Produced by Direct Electroplating [Volume 38, Issue 1, 2019, Pages 87-102]
Ebrahimifar, H. Investigation on the Microstructure, Oxidation and Electrical Behavior of Ti-coated Crofer 22APU Steel for SOFC Interconnect Applications [Volume 38, Issue 3, 2019, Pages 1-13]
Ekhlaspour, F. Investigation on the Microstructure, Oxidation and Electrical Behavior of Ti-coated Crofer 22APU Steel for SOFC Interconnect Applications [Volume 38, Issue 3, 2019, Pages 1-13]
Emadi, R. Evaluation of Bioactivity and Corrosion Behavior of AZ91 Alloy with Polymer/Ceramic Composite Coating [Volume 38, Issue 3, 2019, Pages 73-85]
Emami, M. A New Method for the Experimental Evaluation of High-Temperature Erosion-Corrosion in Fluidized Bed Waste Incineration Conditions [Volume 38, Issue 3, 2019, Pages 101-113]
Esfahani, H. Boriding of In-738 Superalloy via the Pack Cementation Method and the Study of the Kinetic of Boride Layer Formation [Volume 38, Issue 1, 2019, Pages 76-86]
Eshaghi, A. Fabrication of MgF2-SiO2 Nanocomposite Thin Films and Investigation of Their Optical and Hydrophobic Properties [Volume 38, Issue 2, 2019, Pages 91-104]
Eshraghi, M. The Effect of Zn- Cr Substitution on the Structural and Magnetic Properties of Cobalt Ferrite Nanoparticles [Volume 38, Issue 1, 2019, Pages 1-11]
Eslami, A. Corrosion Fatigue of 17-4pH Stainless Steel in a Simulated Sea Water Solution [Volume 38, Issue 2, 2019, Pages 69-81]
F
Fadaeifard, F. Corrosion Fatigue of 17-4pH Stainless Steel in a Simulated Sea Water Solution [Volume 38, Issue 2, 2019, Pages 69-81]
Faeghinia, A. Investigation of Glass- Steel Slag Foam Composite Sintering in Presence of SiC [Volume 38, Issue 4, 2020, Pages 51-64]
Faghani, G. R. TIG Surface Alloying of Ti-6Al-4V with Nitrogen and Chromium for Improved Tribological Properties [Volume 38, Issue 4, 2020, Pages 65-74]
Farahmandjou, M. Preparation and Characterization of Cerium Doped Titanium Dioxide Nanoparticles by the Electrical Discharge Method [Volume 38, Issue 2, 2019, Pages 83-90]
Farmanesh, Kh. Investigation of the Effect of Pilgering Process Parameters on Deformation Behavior of an Austenitic Stainless Steel [Volume 38, Issue 3, 2019, Pages 57-71]
Fathi, M. H. Synthesis and Characterization of Mechanical Behavior and Thermal Shock Resistance of Macro-Porous SiC Solar Absorber [Volume 38, Issue 4, 2020, Pages 87-101]
G
Ghalibaf Tousi, H. Effect of Chelating Agent on Morphology and Phase Evolution of Spinel Nanoparticles Synthesized via Sol-Gel Method [Volume 38, Issue 4, 2020, Pages 33-42]
Ghasemian Malakshah, M. Corrosion Fatigue of 17-4pH Stainless Steel in a Simulated Sea Water Solution [Volume 38, Issue 2, 2019, Pages 69-81]
H
Hakimi, M. Improving the Magnetic Properties Co2FeSi Heusler Compound by Modifying the Crystalline Order in Different Manufacturing Procedures [Volume 38, Issue 1, 2019, Pages 13-21]
Hayashi, Sh. A New Method for the Experimental Evaluation of High-Temperature Erosion-Corrosion in Fluidized Bed Waste Incineration Conditions [Volume 38, Issue 3, 2019, Pages 101-113]
J
Jafari, A. Preparation and Characterization of Cerium Doped Titanium Dioxide Nanoparticles by the Electrical Discharge Method [Volume 38, Issue 2, 2019, Pages 83-90]
Jafar Tafreshi, M. Synthesis & Characterization of CaB4O7 Powder by Solid-State Reaction [Volume 38, Issue 1, 2019, Pages 65-74]
K
Karimzadeh, F. Investigating the Joining of Ni3Al Intermetallic Compound, using Transient Liquid Phase (TLP) Method with Cu Interlayer [Volume 38, Issue 4, 2020, Pages 19-31]
Khademi, S. Preparation and Characterization of Cerium Doped Titanium Dioxide Nanoparticles by the Electrical Discharge Method [Volume 38, Issue 2, 2019, Pages 83-90]
Khajeh-Amiri, A. R. TIG Surface Alloying of Ti-6Al-4V with Nitrogen and Chromium for Improved Tribological Properties [Volume 38, Issue 4, 2020, Pages 65-74]
Kharaziha, M. Influence of Cu Element on Degradation Rate and Biological Properties of Mg-Al-Cu Alloy Prepared by Spark Plasma Sintering [Volume 38, Issue 3, 2019, Pages 87-99]
Kharaziha, M. Influence of Cu Element on Degradation Rate and Biological Properties of Mg-Al-Cu Alloy Prepared by Spark Plasma Sintering [Volume 38, Issue 3, 2019, Pages 87-99]
L
Loghman Estarki, M. R. Effect of Calcination Temperature and Li / TFA Molar Ratio on Morphology and Phase of Lithium Fluoride Nanoparticles Produced by Fluorolytic Sol-Gel Method [Volume 38, Issue 3, 2019, Pages 29-39]
Loghman Estarki, M. R. Effect of Chelating Agent on Morphology and Phase Evolution of Spinel Nanoparticles Synthesized via Sol-Gel Method [Volume 38, Issue 4, 2020, Pages 33-42]
Lorak, A. Investigation of Mode I Delamination Resistance in Inter-ply and Intra-ply Hybrid Composites Reinforced with Basalt/Nylon Woven Fabrics [Volume 38, Issue 3, 2019, Pages 15-27]
M
Maniei, M. Fabrication of MgF2-SiO2 Nanocomposite Thin Films and Investigation of Their Optical and Hydrophobic Properties [Volume 38, Issue 2, 2019, Pages 91-104]
Mardi, H. Investigation of Glass- Steel Slag Foam Composite Sintering in Presence of SiC [Volume 38, Issue 4, 2020, Pages 51-64]
Mashhadi, M. Synthesis of HfB2 Powders by Carbothermal Reduction [Volume 38, Issue 4, 2020, Pages 75-85]
Mohammadi Bodaghabadi, F. Effect of Calcination Temperature and Li / TFA Molar Ratio on Morphology and Phase of Lithium Fluoride Nanoparticles Produced by Fluorolytic Sol-Gel Method [Volume 38, Issue 3, 2019, Pages 29-39]
Mohammad Sharifi, E. Investigation of the Effect of Pilgering Process Parameters on Deformation Behavior of an Austenitic Stainless Steel [Volume 38, Issue 3, 2019, Pages 57-71]
Mohammad Sharifi, E. Effect of Chelating Agent on Morphology and Phase Evolution of Spinel Nanoparticles Synthesized via Sol-Gel Method [Volume 38, Issue 4, 2020, Pages 33-42]
Morakkabati, M. Flow Behavior of SP-700 Titanium Alloy During Hot Tensile Deformation in α+β and β Phase Regions [Volume 38, Issue 1, 2019, Pages 37-48]
Mosleh, Z. The Effect of Zn- Cr Substitution on the Structural and Magnetic Properties of Cobalt Ferrite Nanoparticles [Volume 38, Issue 1, 2019, Pages 1-11]
Mousavi Ghahfarokhi, S. E. Effect of Annealing Temperature on the Structural, Magnetic and Optical Properties of SrCo2Fe16O27 Hexaferrite Nanostructure [Volume 38, Issue 3, 2019, Pages 41-55]
Musazadeh, M. H. Investigation of the Effect of Pilgering Process Parameters on Deformation Behavior of an Austenitic Stainless Steel [Volume 38, Issue 3, 2019, Pages 57-71]
N
Nosraty, H. Investigation of Mode I Delamination Resistance in Inter-ply and Intra-ply Hybrid Composites Reinforced with Basalt/Nylon Woven Fabrics [Volume 38, Issue 3, 2019, Pages 15-27]
P
Parvanian, A. R. Synthesis and Characterization of Mechanical Behavior and Thermal Shock Resistance of Macro-Porous SiC Solar Absorber [Volume 38, Issue 4, 2020, Pages 87-101]
Poursharifi, N. Investigating the Release of Methotrexate and 5-Fluorouracil Anticancer Drugs from Multi-Layered Nanofiber Structure of Polycaprolactone/Chitosan [Volume 38, Issue 4, 2020, Pages 1-17]
R
Rahimi, M. The Effect of Zn- Cr Substitution on the Structural and Magnetic Properties of Cobalt Ferrite Nanoparticles [Volume 38, Issue 1, 2019, Pages 1-11]
Ramazani, M. Effect of Calcination Temperature and Li / TFA Molar Ratio on Morphology and Phase of Lithium Fluoride Nanoparticles Produced by Fluorolytic Sol-Gel Method [Volume 38, Issue 3, 2019, Pages 29-39]
Ranjbar, Khalil The Effect of Heat Treatment on the Microstructure and Mechanical Properties of Al/Al3Zr + Al3Ti In-situ Hybrid Composite Fabricated by Friction Stir Processing [Volume 38, Issue 1, 2019, Pages 49-64]
Rasouli Samar, M. Boriding of In-738 Superalloy via the Pack Cementation Method and the Study of the Kinetic of Boride Layer Formation [Volume 38, Issue 1, 2019, Pages 76-86]
Rasuli, R. Preparation and Characterization of Cerium Doped Titanium Dioxide Nanoparticles by the Electrical Discharge Method [Volume 38, Issue 2, 2019, Pages 83-90]
S
Saeedi, V. Influence of Cu Element on Degradation Rate and Biological Properties of Mg-Al-Cu Alloy Prepared by Spark Plasma Sintering [Volume 38, Issue 3, 2019, Pages 87-99]
Saeidpour, F. Oxidation and Electrical Behavior of Crofer 22APU Steel with the Co/Y2O3 Coating Produced by Direct Electroplating [Volume 38, Issue 1, 2019, Pages 87-102]
Safari, M. Improving the Magnetic Properties Co2FeSi Heusler Compound by Modifying the Crystalline Order in Different Manufacturing Procedures [Volume 38, Issue 1, 2019, Pages 13-21]
Safari, N. Influence of Cu Element on Degradation Rate and Biological Properties of Mg-Al-Cu Alloy Prepared by Spark Plasma Sintering [Volume 38, Issue 3, 2019, Pages 87-99]
Salehi, H. Ab-Initio Study of Optical and Magnetic Properties of Tungsten Disulfide [Volume 38, Issue 4, 2020, Pages 43-50]
Salimijazi, H. R. Synthesis and Characterization of Mechanical Behavior and Thermal Shock Resistance of Macro-Porous SiC Solar Absorber [Volume 38, Issue 4, 2020, Pages 87-101]
Samii Zafarghandi, M. Hot Deformation Behavior of Haynes 25 by the Hot Tensile Test [Volume 38, Issue 2, 2019, Pages 1-10]
Sasani qhamsari, M. Synthesis & Characterization of CaB4O7 Powder by Solid-State Reaction [Volume 38, Issue 1, 2019, Pages 65-74]
Semnani, D. Adsorption of Fluconazole Drug on Silica Aerogelâ by Immersion Method and Investigation of the Rate and Mechanism of Drug Release [Volume 38, Issue 2, 2019, Pages 25-34]
Semnani, D. Investigating the Release of Methotrexate and 5-Fluorouracil Anticancer Drugs from Multi-Layered Nanofiber Structure of Polycaprolactone/Chitosan [Volume 38, Issue 4, 2020, Pages 1-17]
Shahverdi, H. R. Mechanical Properties and Spring -Back Investigation in Creep Age Forming Process of 7075 Al Alloy [Volume 38, Issue 2, 2019, Pages 55-67]
Sheikh, H. Effect of Chelating Agent on Morphology and Phase Evolution of Spinel Nanoparticles Synthesized via Sol-Gel Method [Volume 38, Issue 4, 2020, Pages 33-42]
Sheikhali, A. Flow Behavior of SP-700 Titanium Alloy During Hot Tensile Deformation in α+β and β Phase Regions [Volume 38, Issue 1, 2019, Pages 37-48]
Shirvani, K. The Effect of Platinum Layer and Aluminizing Process on Surface Roughness of Coated Superalloy by Pt-Al [Volume 38, Issue 2, 2019, Pages 35-53]
Shirvani, M. Synthesis of HfB2 Powders by Carbothermal Reduction [Volume 38, Issue 4, 2020, Pages 75-85]
Sohrabi, M. Fabrication of Poly(ε-Caprolactone), Hydrophilic and β-Tricalcium Phosphate Layer- by -Layer Nanofibrous Scaffolds for Tissue Engineering [Volume 38, Issue 1, 2019, Pages 23-35]
Soleimani, F. Evaluation of Bioactivity and Corrosion Behavior of AZ91 Alloy with Polymer/Ceramic Composite Coating [Volume 38, Issue 3, 2019, Pages 73-85]
Solgi, S. Synthesis & Characterization of CaB4O7 Powder by Solid-State Reaction [Volume 38, Issue 1, 2019, Pages 65-74]
Soltani, P. Investigating the Release of Methotrexate and 5-Fluorouracil Anticancer Drugs from Multi-Layered Nanofiber Structure of Polycaprolactone/Chitosan [Volume 38, Issue 4, 2020, Pages 1-17]
Soltani Samani, M. Investigating the Joining of Ni3Al Intermetallic Compound, using Transient Liquid Phase (TLP) Method with Cu Interlayer [Volume 38, Issue 4, 2020, Pages 19-31]
T
Talebi, Z. Adsorption of Fluconazole Drug on Silica Aerogelâ by Immersion Method and Investigation of the Rate and Mechanism of Drug Release [Volume 38, Issue 2, 2019, Pages 25-34]
Tavakoli, R. The Effect of Temperature on the Fracture Surface Morphology and Ductility of La55Al25Ni5Cu10Co5 BMG [Volume 38, Issue 2, 2019, Pages 11-24]
Tehrani, M. Investigation of Mode I Delamination Resistance in Inter-ply and Intra-ply Hybrid Composites Reinforced with Basalt/Nylon Woven Fabrics [Volume 38, Issue 3, 2019, Pages 15-27]
Toroghinejad, M. Influence of Cu Element on Degradation Rate and Biological Properties of Mg-Al-Cu Alloy Prepared by Spark Plasma Sintering [Volume 38, Issue 3, 2019, Pages 87-99]
V
Vafaei, R. Investigation of the Effect of Pilgering Process Parameters on Deformation Behavior of an Austenitic Stainless Steel [Volume 38, Issue 3, 2019, Pages 57-71]
Y
Yosofi, M. Synthesis of HfB2 Powders by Carbothermal Reduction [Volume 38, Issue 4, 2020, Pages 75-85]
Z
Zadali Mohammad Kotiyani, M. The Effect of Heat Treatment on the Microstructure and Mechanical Properties of Al/Al3Zr + Al3Ti In-situ Hybrid Composite Fabricated by Friction Stir Processing [Volume 38, Issue 1, 2019, Pages 49-64]
Zandrahimi, M. Oxidation and Electrical Behavior of Crofer 22APU Steel with the Co/Y2O3 Coating Produced by Direct Electroplating [Volume 38, Issue 1, 2019, Pages 87-102]
Zandrahimi, M. Investigation on the Microstructure, Oxidation and Electrical Behavior of Ti-coated Crofer 22APU Steel for SOFC Interconnect Applications [Volume 38, Issue 3, 2019, Pages 1-13]
Zangeneh Madar, K. The Effect of Platinum Layer and Aluminizing Process on Surface Roughness of Coated Superalloy by Pt-Al [Volume 38, Issue 2, 2019, Pages 35-53]
Zargar Shoushtari, M. Effect of Annealing Temperature on the Structural, Magnetic and Optical Properties of SrCo2Fe16O27 Hexaferrite Nanostructure [Volume 38, Issue 3, 2019, Pages 41-55]
Zhulayi Bakhoda, N. Ab-Initio Study of Optical and Magnetic Properties of Tungsten Disulfide [Volume 38, Issue 4, 2020, Pages 43-50]
