Abbasi, M. Production of W-Cu-Ni Alloy and Cu Bimetal by SPS Process and Analysis of Process Parameters [Volume 39, Issue 4, 2021, Pages 61-76]
Ahangarani, Sh. The Role of Annealing on Properties of Silicon Films Deposited By EB-PVD [Volume 39, Issue 1, 2020, Pages 99-103]
Al-Haji, A. Influence of Temperature, Time, pH, Capping Agent Concentration and Zn/Se Molar Ratio on Morphology and Phase Evolution of Zinc Selenide Nanoparticles Synthesized by Hydrothermal Method [Volume 39, Issue 3, 2020, Pages 19-39]
Arayesh, M. A. Synthesis, Characterization and Investigation of Magnetic Properties of Co3O4/CoFe2O4 Nanocomposite Prepared by Calcination of [CO(SALEN)(PPH3)(H2O)]4[Fe(CN)6] and [Co(Salophen)(PPH3)(H2O)]4[Fe(CN)6] Binary Complex Salts [Volume 39, Issue 2, 2020, Pages 81-101]
Arjmand, S. Development of Al-Ti-N Composite Coatings on Commercially Pure Ti Surface by Tungsten Inert Gas Process [Volume 39, Issue 3, 2020, Pages 73-98]
Arjmand, S. Evaluating the Effect of the Number of Welding Passes on Microstructure, Hardness and Residual Stress of Ti-Al-Si Composite Coatings [Volume 39, Issue 4, 2021, Pages 1-21]
Asadi Khanouki, M. T. Effect of Temperature and Strain Rate on Plastic Deformation Behavior of Zr46(Cu4.5/5.5Ag1/5.5)46Al8 Bulk Metallic Glass [Volume 39, Issue 3, 2020, Pages 129-140]
Asghari, S. Effect of Weld Heat Input on Microstructure and Mechanical Properties of Dissimilar Joints of API-B and API-X42 Pipeline Steels [Volume 39, Issue 3, 2020, Pages 55-72]
Atefi, A. Formation and Evaluation of Oxidation Behavior of Zirconia- Aluminide Coating on Nickel- Based Alloy [Volume 39, Issue 1, 2020, Pages 1-12]
B
Badri, H. Determining the Hot Deformation Temperature Range of Medium Carbon Ni-Cr-Mo Low Alloy Steels using Hot Tensile and
Hot Torsion Tests [Volume 39, Issue 3, 2020, Pages 99-115]
Bahremandi Tolou, N. Fabrication of Nerve Guide Conduit Based on 3D Graphene/ Polymer for Nerve Tissue Engineering [Volume 39, Issue 1, 2020, Pages 61-73]
Borouni, A. Evaluating the Effect of Ta/W Ratio on Microstructure and Stress Rupture Properties of Ni-Based Single Crystal Superalloy PWA1483 [Volume 39, Issue 3, 2020, Pages 1-18]
D
Davar, F. Effect of Different Concentrations of Rosemary Extract on the Phase and Morphology of Zno Nanoparticles and Its Efficiency on Degradation of Methylene Blue Dye [Volume 39, Issue 1, 2020, Pages 89-98]
E
Emami, M. High Temperature Erosion- Oxidation Behavior of Nickel- Based Alloys Containing Mo in Fluidized Bed Waste Incineration [Volume 39, Issue 3, 2020, Pages 41-54]
Enayati, M. H. Development of Copper-Ferrite Spinel Coating on AISI 430 Steel Used as Solid Oxide Fuel Cell [Volume 39, Issue 4, 2021, Pages 23-44]
Enteshari, Z. Effect of Different Concentrations of Rosemary Extract on the Phase and Morphology of Zno Nanoparticles and Its Efficiency on Degradation of Methylene Blue Dye [Volume 39, Issue 1, 2020, Pages 89-98]
Eskandari, N. Synthesis, Characterization and Investigation of Magnetic Properties of Co3O4/CoFe2O4 Nanocomposite Prepared by Calcination of [CO(SALEN)(PPH3)(H2O)]4[Fe(CN)6] and [Co(Salophen)(PPH3)(H2O)]4[Fe(CN)6] Binary Complex Salts [Volume 39, Issue 2, 2020, Pages 81-101]
Eslami, A. M. Effect of Weld Heat Input on Microstructure and Mechanical Properties of Dissimilar Joints of API-B and API-X42 Pipeline Steels [Volume 39, Issue 3, 2020, Pages 55-72]
Etminan, M. Investigation of the Effect of Homogenization Treatment on Distribution of Alloying Elements, Microstructure and Hardness of Co-Al-W-Ti-Ta-Base Superalloy [Volume 39, Issue 2, 2020, Pages 103-119]
F
Faggio, G. Fabrication of Nerve Guide Conduit Based on 3D Graphene/ Polymer for Nerve Tissue Engineering [Volume 39, Issue 1, 2020, Pages 61-73]
Farhadian, M. Effect of Amorphous Silica Addition on Martensitic Phase Transformation of Zirconia and Investigation of its Tetragonal Structure Stability Mechanisms [Volume 39, Issue 2, 2020, Pages 49-63]
Forooghi, I. Pressureless Sintering & Mechanical & Thermal Properties of ZrB2-ZrC-SiC Nanocomposite [Volume 39, Issue 4, 2021, Pages 115-129]
G
Ghasemi, A. Effect of Neodymium Dopping on Morphology, Phase and Magnetic Properties of Ni0.7Zn0.3NdxFe2-xO4 Ferrite Nanoparticles Synthesized by Complexing Sol-Gel Method [Volume 39, Issue 2, 2020, Pages 121-136]
Ghasemi, A. The Effect of Si and B Addition on the Structural and Magnetic Properties of AlCoCrMnNi High Entropy Alloys [Volume 39, Issue 4, 2021, Pages 131-144]
Golozar, M. A. Effect of Amorphous Silica Addition on Martensitic Phase Transformation of Zirconia and Investigation of its Tetragonal Structure Stability Mechanisms [Volume 39, Issue 2, 2020, Pages 49-63]
Golozar, M. A. Effect of Amorphous Silica Addition on Martensitic Phase Transformation of Zirconia and Investigation of its Tetragonal Structure Stability Mechanisms [Volume 39, Issue 2, 2020, Pages 49-63]
Gordani, G. R. Effect of Neodymium Dopping on Morphology, Phase and Magnetic Properties of Ni0.7Zn0.3NdxFe2-xO4 Ferrite Nanoparticles Synthesized by Complexing Sol-Gel Method [Volume 39, Issue 2, 2020, Pages 121-136]
H
Haddad Sabzevar, M. Morphological and Thermal Flux Analysis in as-Cast Al Alloy after Swarf Addition [Volume 39, Issue 4, 2021, Pages 95-113]
Hadian, H. Morphological and Thermal Flux Analysis in as-Cast Al Alloy after Swarf Addition [Volume 39, Issue 4, 2021, Pages 95-113]
Hasani, S. Oxidation Kinetics of Magnesium Powder Particles in Non-Isothermal Condition [Volume 39, Issue 1, 2020, Pages 75-87]
Hayashi, S. High Temperature Erosion- Oxidation Behavior of Nickel- Based Alloys Containing Mo in Fluidized Bed Waste Incineration [Volume 39, Issue 3, 2020, Pages 41-54]
Hosseini, S. N. Development of Copper-Ferrite Spinel Coating on AISI 430 Steel Used as Solid Oxide Fuel Cell [Volume 39, Issue 4, 2021, Pages 23-44]
Hosseini, S. R. Influence of Temperature, Time, pH, Capping Agent Concentration and Zn/Se Molar Ratio on Morphology and Phase Evolution of Zinc Selenide Nanoparticles Synthesized by Hydrothermal Method [Volume 39, Issue 3, 2020, Pages 19-39]
J
Jafari, M. Effect of Temperature and Time on the Joint Properties of AISI420 Steel to SAF2507 Steel Produced by Transient Liquid Phase Process [Volume 39, Issue 2, 2020, Pages 65-80]
Javadpour, J. Fabrication and Characterization of Polycaprolactone â Zeolite Y Nanocomposite for Bone Tissue Engineering [Volume 39, Issue 4, 2021, Pages 77-94]
K
Kalantar, M. Structural, Magnetic and Acetone Sensing Properties of Barium- Calcium Hexaferrite Synthesized by Sol- Gel Auto Combustion Method [Volume 39, Issue 1, 2020, Pages 13-27]
Karimian, A. Structural, Magnetic and Acetone Sensing Properties of Barium- Calcium Hexaferrite Synthesized by Sol- Gel Auto Combustion Method [Volume 39, Issue 1, 2020, Pages 13-27]
Karimzadeh, F. Development of Copper-Ferrite Spinel Coating on AISI 430 Steel Used as Solid Oxide Fuel Cell [Volume 39, Issue 4, 2021, Pages 23-44]
Karkhaneh, A. Fabrication of Poly (Lactic Acid) Nanofiber Carrier Loaded with Dexamethasone Drug [Volume 39, Issue 2, 2020, Pages 21-34]
Kermanpur, A. Evaluating the Effect of Ta/W Ratio on Microstructure and Stress Rupture Properties of Ni-Based Single Crystal Superalloy PWA1483 [Volume 39, Issue 3, 2020, Pages 1-18]
Kermanpur, A. Evaluating the Effect of Ta/W Ratio on Microstructure and Stress Rupture Properties of Ni-Based Single Crystal Superalloy PWA1483 [Volume 39, Issue 3, 2020, Pages 1-18]
Kharaziha, M. Fabrication of Nerve Guide Conduit Based on 3D Graphene/ Polymer for Nerve Tissue Engineering [Volume 39, Issue 1, 2020, Pages 61-73]
Kharaziha, M. Fabrication and Characterization of Polycaprolactone â Zeolite Y Nanocomposite for Bone Tissue Engineering [Volume 39, Issue 4, 2021, Pages 77-94]
Kharaziha, M. Fabrication and Characterization of Polycaprolactone â Zeolite Y Nanocomposite for Bone Tissue Engineering [Volume 39, Issue 4, 2021, Pages 77-94]
Khorshidi, S. Fabrication of Poly (Lactic Acid) Nanofiber Carrier Loaded with Dexamethasone Drug [Volume 39, Issue 2, 2020, Pages 21-34]
Khosravi, M. Synthesis of Hard Carbon- Silicon Nanocomposite as Anode Active Material for Lithium-Ion Batteries [Volume 39, Issue 2, 2020, Pages 1-19]
Kianfar, A. H. Synthesis, Characterization and Investigation of Magnetic Properties of Co3O4/CoFe2O4 Nanocomposite Prepared by Calcination of [CO(SALEN)(PPH3)(H2O)]4[Fe(CN)6] and [Co(Salophen)(PPH3)(H2O)]4[Fe(CN)6] Binary Complex Salts [Volume 39, Issue 2, 2020, Pages 81-101]
L
Lisi, N. Fabrication of Nerve Guide Conduit Based on 3D Graphene/ Polymer for Nerve Tissue Engineering [Volume 39, Issue 1, 2020, Pages 61-73]
Loghman Estarki, M. R. Effect of Neodymium Dopping on Morphology, Phase and Magnetic Properties of Ni0.7Zn0.3NdxFe2-xO4 Ferrite Nanoparticles Synthesized by Complexing Sol-Gel Method [Volume 39, Issue 2, 2020, Pages 121-136]
Loghman Estraki, M. R. Influence of Temperature, Time, pH, Capping Agent Concentration and Zn/Se Molar Ratio on Morphology and Phase Evolution of Zinc Selenide Nanoparticles Synthesized by Hydrothermal Method [Volume 39, Issue 3, 2020, Pages 19-39]
M
Mahallati, M. Synthesis of Hard Carbon- Silicon Nanocomposite as Anode Active Material for Lithium-Ion Batteries [Volume 39, Issue 2, 2020, Pages 1-19]
Mashhadi, M. Pressureless Sintering & Mechanical & Thermal Properties of ZrB2-ZrC-SiC Nanocomposite [Volume 39, Issue 4, 2021, Pages 115-129]
Masoomi Ganjgah, S. Production of W-Cu-Ni Alloy and Cu Bimetal by SPS Process and Analysis of Process Parameters [Volume 39, Issue 4, 2021, Pages 61-76]
Mazinani, M. Morphological and Thermal Flux Analysis in as-Cast Al Alloy after Swarf Addition [Volume 39, Issue 4, 2021, Pages 95-113]
Mehran, M. Synthesis of the Silicon Inverted Nano- Pyramids and Study of Their Self- Cleaning Behavior [Volume 39, Issue 1, 2020, Pages 47-59]
Morakabati, M. Investigation of the Effect of Homogenization Treatment on Distribution of Alloying Elements, Microstructure and Hardness of Co-Al-W-Ti-Ta-Base Superalloy [Volume 39, Issue 2, 2020, Pages 103-119]
Morakabati, M. Determining the Hot Deformation Temperature Range of Medium Carbon Ni-Cr-Mo Low Alloy Steels using Hot Tensile and
Hot Torsion Tests [Volume 39, Issue 3, 2020, Pages 99-115]
Mostaan, H. Effect of Temperature and Time on the Joint Properties of AISI420 Steel to SAF2507 Steel Produced by Transient Liquid Phase Process [Volume 39, Issue 2, 2020, Pages 65-80]
Mostafaee Heydarloo, F. Determining the Hot Deformation Temperature Range of Medium Carbon Ni-Cr-Mo Low Alloy Steels using Hot Tensile and
Hot Torsion Tests [Volume 39, Issue 3, 2020, Pages 99-115]
N
Navazani, S. Investigation of the Effect of Adding Aluminum Trihydrate (ATH) Particles on Electrical and Hydrophobic Properties of Two-Part RTV Silicon Rubber [Volume 39, Issue 3, 2020, Pages 117-128]
Nickakhtar, Y. Effect of Nanoclay Addition on the Properties of Polycaprolactone Nanocomposite Scaffolds Containing Adipose Derived Mesenchymal Stem Cells used in Soft Tissue Engineering [Volume 39, Issue 4, 2021, Pages 45-59]
Q
Qazi mir saeid, S. M. Investigation of the Effect of Homogenization Treatment on Distribution of Alloying Elements, Microstructure and Hardness of Co-Al-W-Ti-Ta-Base Superalloy [Volume 39, Issue 2, 2020, Pages 103-119]
R
Raeissi, K. Effect of Amorphous Silica Addition on Martensitic Phase Transformation of Zirconia and Investigation of its Tetragonal Structure Stability Mechanisms [Volume 39, Issue 2, 2020, Pages 49-63]
Rafiei, M. Effect of Temperature and Time on the Joint Properties of AISI420 Steel to SAF2507 Steel Produced by Transient Liquid Phase Process [Volume 39, Issue 2, 2020, Pages 65-80]
Rajabi, T. Synthesis of Zinc/Zinc Oxide Nanoparticles by Electric Discharge Method in Distilled-Water and Argon-Gas Environments [Volume 39, Issue 2, 2020, Pages 35-48]
Ramezani, M. Influence of Temperature, Time, pH, Capping Agent Concentration and Zn/Se Molar Ratio on Morphology and Phase Evolution of Zinc Selenide Nanoparticles Synthesized by Hydrothermal Method [Volume 39, Issue 3, 2020, Pages 19-39]
Rezaei Abdadchi, M. Investigation of the Effect of Adding Aluminum Trihydrate (ATH) Particles on Electrical and Hydrophobic Properties of Two-Part RTV Silicon Rubber [Volume 39, Issue 3, 2020, Pages 117-128]
Rezaie, H.R. Fabrication and Characterization of Polycaprolactone â Zeolite Y Nanocomposite for Bone Tissue Engineering [Volume 39, Issue 4, 2021, Pages 77-94]
Riahi Noori, N. Investigation of the Effect of Adding Aluminum Trihydrate (ATH) Particles on Electrical and Hydrophobic Properties of Two-Part RTV Silicon Rubber [Volume 39, Issue 3, 2020, Pages 117-128]
S
Sadrnezhaad, S. K. Synthesis of Zinc/Zinc Oxide Nanoparticles by Electric Discharge Method in Distilled-Water and Argon-Gas Environments [Volume 39, Issue 2, 2020, Pages 35-48]
Saeidi, N. Effect of Weld Heat Input on Microstructure and Mechanical Properties of Dissimilar Joints of API-B and API-X42 Pipeline Steels [Volume 39, Issue 3, 2020, Pages 55-72]
Salimi Jazi, H. R. Fabrication of Nerve Guide Conduit Based on 3D Graphene/ Polymer for Nerve Tissue Engineering [Volume 39, Issue 1, 2020, Pages 61-73]
Seifoddini, A. Oxidation Kinetics of Magnesium Powder Particles in Non-Isothermal Condition [Volume 39, Issue 1, 2020, Pages 75-87]
Shafiei, S. S. Effect of Nanoclay Addition on the Properties of Polycaprolactone Nanocomposite Scaffolds Containing Adipose Derived Mesenchymal Stem Cells used in Soft Tissue Engineering [Volume 39, Issue 4, 2021, Pages 45-59]
Shahriari Nogorani, F. Formation and Evaluation of Oxidation Behavior of Zirconia- Aluminide Coating on Nickel- Based Alloy [Volume 39, Issue 1, 2020, Pages 1-12]
Shavandi, M. Effect of Nanoclay Addition on the Properties of Polycaprolactone Nanocomposite Scaffolds Containing Adipose Derived Mesenchymal Stem Cells used in Soft Tissue Engineering [Volume 39, Issue 4, 2021, Pages 45-59]
Soltani, M. Oxidation Kinetics of Magnesium Powder Particles in Non-Isothermal Condition [Volume 39, Issue 1, 2020, Pages 75-87]
T
Taghipoor, M. A. Formation and Evaluation of Oxidation Behavior of Zirconia- Aluminide Coating on Nickel- Based Alloy [Volume 39, Issue 1, 2020, Pages 1-12]
Taheri Zadeh, A. Effect of Weld Heat Input on Microstructure and Mechanical Properties of Dissimilar Joints of API-B and API-X42 Pipeline Steels [Volume 39, Issue 3, 2020, Pages 55-72]
Tamburrano, A. Fabrication of Nerve Guide Conduit Based on 3D Graphene/ Polymer for Nerve Tissue Engineering [Volume 39, Issue 1, 2020, Pages 61-73]
Tavoosi, M. Development of Al-Ti-N Composite Coatings on Commercially Pure Ti Surface by Tungsten Inert Gas Process [Volume 39, Issue 3, 2020, Pages 73-98]
Tavoosi, M. The Effect of Si and B Addition on the Structural and Magnetic Properties of AlCoCrMnNi High Entropy Alloys [Volume 39, Issue 4, 2021, Pages 131-144]
Toorani Farani, M. Effect of Plasma Electrolytic Oxidation Process as a Pretreatment on Corrosion Resistance of Polymeric Coatings Applied on Mg Alloy [Volume 39, Issue 1, 2020, Pages 29-45]
Torabi, S. Fabrication of Poly (Lactic Acid) Nanofiber Carrier Loaded with Dexamethasone Drug [Volume 39, Issue 2, 2020, Pages 21-34]
Torkian, S. Effect of Neodymium Dopping on Morphology, Phase and Magnetic Properties of Ni0.7Zn0.3NdxFe2-xO4 Ferrite Nanoparticles Synthesized by Complexing Sol-Gel Method [Volume 39, Issue 2, 2020, Pages 121-136]
V
Vahedi, M. Synthesis of Zinc/Zinc Oxide Nanoparticles by Electric Discharge Method in Distilled-Water and Argon-Gas Environments [Volume 39, Issue 2, 2020, Pages 35-48]
Z
Zakeri, N. Fabrication and Characterization of Polycaprolactone â Zeolite Y Nanocomposite for Bone Tissue Engineering [Volume 39, Issue 4, 2021, Pages 77-94]
Zamani, A. Influence of Temperature, Time, pH, Capping Agent Concentration and Zn/Se Molar Ratio on Morphology and Phase Evolution of Zinc Selenide Nanoparticles Synthesized by Hydrothermal Method [Volume 39, Issue 3, 2020, Pages 19-39]
Zamani, Kh. The Effect of Si and B Addition on the Structural and Magnetic Properties of AlCoCrMnNi High Entropy Alloys [Volume 39, Issue 4, 2021, Pages 131-144]
Zarchi, M. The Role of Annealing on Properties of Silicon Films Deposited By EB-PVD [Volume 39, Issue 1, 2020, Pages 99-103]
Zolriasatein, A. Investigation of the Effect of Adding Aluminum Trihydrate (ATH) Particles on Electrical and Hydrophobic Properties of Two-Part RTV Silicon Rubber [Volume 39, Issue 3, 2020, Pages 117-128]
