Abbasi, M. S. Synthesis and Characterization of Composite Coating of Iron Oxide and Bioactive Glass, Coated by Electrophoretic co-Deposition Method for Biomedical Applications [Volume 42, Issue 2, 2023, Pages 1-13]
Abedi, M. Catalytic Application of Copper Complex Prepared by a NNN Pincer Ligand Supported on Silica Nanoparticles Using first Generation of Polyamidoamine Dendrimers [Volume 42, Issue 4, 2024, Pages 77-91]
Adel-Mehraban, F. Evaluation of the Corrosion Performance of Carbon Steel and 316 Stainless Steel in aMDEA Solution Uused in the CO2 Absorption/Desorption Process [Volume 42, Issue 3, 2023, Pages 1-15]
Aghanejad, S.M. The Effect of Pertlite Nanoparticles on the Tensile Properties of NR/HDPE Composite and Optimization of its Composition Using Response Surface Method [Volume 42, Issue 4, 2024, Pages 13-31]
Ahmadian, M. Investigating the Microstructure and Biological Properties of Baghdadite Bioceramic Nanoparticles Synthesized by Sol-Gel Process [Volume 42, Issue 2, 2023, Pages 29-39]
Aminsharei, F. Alumina Surface Coating with Zinc Oxide Nanostructures by Hydrothermal Method for Removal of Organic Pollutants from Water [Volume 42, Issue 4, 2024, Pages 33-44]
B
Baharvandi, H. R. Investigating the Effect of Chemical Composition and Sintering Temperature on Mechanical Properties of SiC-5TiB2 Nano Composite Reinforced by Graphene Quantum dot using Taguchi Test Design Method [Volume 42, Issue 2, 2023, Pages 69-84]
Bahrami, A. Synthesis and Characterization of Composite Coating of Iron Oxide and Bioactive Glass, Coated by Electrophoretic co-Deposition Method for Biomedical Applications [Volume 42, Issue 2, 2023, Pages 1-13]
Beigmoradi, R. Effect of Magnetic Field and Electrospray Combination on the Orientation of Carbon Nanotubes in Alginate Core-Shell Composite Adsorbent and Methylene Blue Adsorption [Volume 42, Issue 1, 2023, Pages 17-32]
Beygi-Khosrowshahi, Y. Evaluating the Effect of Milling Time on the Microstructural Changes and Phase Analysis of Mg-3Zn Powder Synthesized by Mechanical Alloying [Volume 42, Issue 1, 2023, Pages 45-57]
Bozorgmehr, M. The Effect of Carbon Nanotubes in Improving the Electromagnetic Behavior of W-type Hexaferrite Nanoparticles Doped With Mn and Ca Cations [Volume 42, Issue 2, 2023, Pages 53-68]
E
Ehsani, N. Investigating the Effect of Chemical Composition and Sintering Temperature on Mechanical Properties of SiC-5TiB2 Nano Composite Reinforced by Graphene Quantum dot using Taguchi Test Design Method [Volume 42, Issue 2, 2023, Pages 69-84]
Emadi, R. Investigating the Microstructure and Biological Properties of Baghdadite Bioceramic Nanoparticles Synthesized by Sol-Gel Process [Volume 42, Issue 2, 2023, Pages 29-39]
F
Feli, E. Creative Techniques on Optical Fiber to Produce Luminescence Electronic Textiles [Volume 42, Issue 3, 2023, Pages 61-72]
Forghani, M. The Effect of Pigment Material on the Optical Absorbance, Emittance, and Wear Resistance of Black Anodized Coatings: A Case Study on 7075 Aluminum Alloy [Volume 42, Issue 2, 2023, Pages 15-27]
Forough, M. R. Investigating the Microstructure and Biological Properties of Baghdadite Bioceramic Nanoparticles Synthesized by Sol-Gel Process [Volume 42, Issue 2, 2023, Pages 29-39]
G
Ghanbari, J. The Effect of Pertlite Nanoparticles on the Tensile Properties of NR/HDPE Composite and Optimization of its Composition Using Response Surface Method [Volume 42, Issue 4, 2024, Pages 13-31]
Ghasemi, A. Evaluation of the Electromagnetic Behavior of TiC/Ti3AlC2 Ceramic Matrix Composites Synthesized by in Situ Method [Volume 42, Issue 1, 2023, Pages 33-44]
Ghasemi, A. The Effect of Carbon Nanotubes in Improving the Electromagnetic Behavior of W-type Hexaferrite Nanoparticles Doped With Mn and Ca Cations [Volume 42, Issue 2, 2023, Pages 53-68]
Ghasemi, A. The Effect of Partial Addition of Silicon on the Electromagnetic Behavior of TiC/Ti3AlC2 Ceramic Matrix Composites [Volume 42, Issue 3, 2023, Pages 49-60]
Gordani, Gh. Evaluation of the Electromagnetic Behavior of TiC/Ti3AlC2 Ceramic Matrix Composites Synthesized by in Situ Method [Volume 42, Issue 1, 2023, Pages 33-44]
Gordani, Gh.R. The Effect of Carbon Nanotubes in Improving the Electromagnetic Behavior of W-type Hexaferrite Nanoparticles Doped With Mn and Ca Cations [Volume 42, Issue 2, 2023, Pages 53-68]
Gordani, G. R. The Effect of Partial Addition of Silicon on the Electromagnetic Behavior of TiC/Ti3AlC2 Ceramic Matrix Composites [Volume 42, Issue 3, 2023, Pages 49-60]
H
Haddady, H. Investigating the Effect of Ball Milling and Heating Processes on the Phase Changes of an Iranian Type of Bauxite [Volume 42, Issue 4, 2024, Pages 61-76]
Hasani, S. Synthesis and Characterization of Ca2+ and Gd3+ Doped Cobalt Ferrite Nanoparticles Coated with Chitosan and Polyethylene Glycol [Volume 42, Issue 1, 2023, Pages 1-16]
Hasani, S. Development of Vicalloy I Ultrathin Foils with Mo Addition Focusing on the Improvement of Magnetic Properties [Volume 42, Issue 4, 2024, Pages 1-12]
Hashemi Rizi, S. H. The Effect of Pigment Material on the Optical Absorbance, Emittance, and Wear Resistance of Black Anodized Coatings: A Case Study on 7075 Aluminum Alloy [Volume 42, Issue 2, 2023, Pages 15-27]
Hassanpoor, S. Synthesis of Template Free Morphology Controlled α-MnO2 Nanorod and Electrochemical Capacitive Study of its RGO Nanocomposite [Volume 42, Issue 3, 2023, Pages 31-48]
Hassanzadeh Tabrizi, S. A. Alumina Surface Coating with Zinc Oxide Nanostructures by Hydrothermal Method for Removal of Organic Pollutants from Water [Volume 42, Issue 4, 2024, Pages 33-44]
Hayati, R. Investigating the Effect of Ball Milling and Heating Processes on the Phase Changes of an Iranian Type of Bauxite [Volume 42, Issue 4, 2024, Pages 61-76]
Hedayati, F. Synthesis of Co3O4/RGO Nanocomposite and Investigation of its Electrochemical Properties for Supercapacitor Applications [Volume 42, Issue 4, 2024, Pages 45-59]
Hosseini-Abari, A.S. Synthesis and Characterization of Composite Coating of Iron Oxide and Bioactive Glass, Coated by Electrophoretic co-Deposition Method for Biomedical Applications [Volume 42, Issue 2, 2023, Pages 1-13]
J
Jalaly, M. Synthesis of Co3O4/RGO Nanocomposite and Investigation of its Electrochemical Properties for Supercapacitor Applications [Volume 42, Issue 4, 2024, Pages 45-59]
Jamali, H. Synthesis of Meso Carbon Micro Beads from Mesophase Pitch by Suspension Method [Volume 42, Issue 3, 2023, Pages 73-92]
K
Kalami, R. Effect of Vertical Magnetic Field on the Electronic and Transport Properties of Armchair Silicene Nanoribbons [Volume 42, Issue 2, 2023, Pages 41-52]
Kamali-Ardakani, M. Development of Vicalloy I Ultrathin Foils with Mo Addition Focusing on the Improvement of Magnetic Properties [Volume 42, Issue 4, 2024, Pages 1-12]
Kavanlouei, M. Evaluating the Effect of Milling Time on the Microstructural Changes and Phase Analysis of Mg-3Zn Powder Synthesized by Mechanical Alloying [Volume 42, Issue 1, 2023, Pages 45-57]
Ketabi, S. A. Effect of Vertical Magnetic Field on the Electronic and Transport Properties of Armchair Silicene Nanoribbons [Volume 42, Issue 2, 2023, Pages 41-52]
Khosravi, H. Effect of Magnetic Field and Electrospray Combination on the Orientation of Carbon Nanotubes in Alginate Core-Shell Composite Adsorbent and Methylene Blue Adsorption [Volume 42, Issue 1, 2023, Pages 17-32]
L
Loghman Estraki, M. R. Synthesis of Meso Carbon Micro Beads from Mesophase Pitch by Suspension Method [Volume 42, Issue 3, 2023, Pages 73-92]
M
Mashreghi, A.R. Synthesis and Characterization of Ca2+ and Gd3+ Doped Cobalt Ferrite Nanoparticles Coated with Chitosan and Polyethylene Glycol [Volume 42, Issue 1, 2023, Pages 1-16]
Mashreghi, A.R. Development of Vicalloy I Ultrathin Foils with Mo Addition Focusing on the Improvement of Magnetic Properties [Volume 42, Issue 4, 2024, Pages 1-12]
Meftahi, A. Creative Techniques on Optical Fiber to Produce Luminescence Electronic Textiles [Volume 42, Issue 3, 2023, Pages 61-72]
Mehrabi, M. The Effect of Acid Washing and YAG:Nd Laser Irradiation on Increasing Hydrogen Storage Capacity in Carbon Nanotubes [Volume 42, Issue 3, 2023, Pages 17-29]
Moayedfard, Y. Effect of Magnetic Field and Electrospray Combination on the Orientation of Carbon Nanotubes in Alginate Core-Shell Composite Adsorbent and Methylene Blue Adsorption [Volume 42, Issue 1, 2023, Pages 17-32]
Mohammadi, S. Synthesis of Co3O4/RGO Nanocomposite and Investigation of its Electrochemical Properties for Supercapacitor Applications [Volume 42, Issue 4, 2024, Pages 45-59]
Mohammadnezhad, G. Catalytic Application of Copper Complex Prepared by a NNN Pincer Ligand Supported on Silica Nanoparticles Using first Generation of Polyamidoamine Dendrimers [Volume 42, Issue 4, 2024, Pages 77-91]
Mohassel, A. Investigating the Effect of Ball Milling and Heating Processes on the Phase Changes of an Iranian Type of Bauxite [Volume 42, Issue 4, 2024, Pages 61-76]
Moradmand, M. Evaluation of the Corrosion Performance of Carbon Steel and 316 Stainless Steel in aMDEA Solution Uused in the CO2 Absorption/Desorption Process [Volume 42, Issue 3, 2023, Pages 1-15]
Mousavi-Khoshdel, S. M. Synthesis of Co3O4/RGO Nanocomposite and Investigation of its Electrochemical Properties for Supercapacitor Applications [Volume 42, Issue 4, 2024, Pages 45-59]
Mozaffarinia, R. Synthesis and Characterization of Copper/Silver Core-Shell Nanoparticles Synthesized by Laser Ablation Method Using a Nanosecond Nd:YAG Laser in Acetone [Volume 42, Issue 1, 2023, Pages 59-71]
N
Naderi-Samani, H. Synthesis and Characterization of Copper/Silver Core-Shell Nanoparticles Synthesized by Laser Ablation Method Using a Nanosecond Nd:YAG Laser in Acetone [Volume 42, Issue 1, 2023, Pages 59-71]
Nazari, M. Investigating the Effect of Chemical Composition and Sintering Temperature on Mechanical Properties of SiC-5TiB2 Nano Composite Reinforced by Graphene Quantum dot using Taguchi Test Design Method [Volume 42, Issue 2, 2023, Pages 69-84]
Nourmohammadi Abadchi, A. The Effect of Pigment Material on the Optical Absorbance, Emittance, and Wear Resistance of Black Anodized Coatings: A Case Study on 7075 Aluminum Alloy [Volume 42, Issue 2, 2023, Pages 15-27]
R
Raeissi, K. Evaluation of the Corrosion Performance of Carbon Steel and 316 Stainless Steel in aMDEA Solution Uused in the CO2 Absorption/Desorption Process [Volume 42, Issue 3, 2023, Pages 1-15]
Rafiee, M. Investigating the Corrosion Behavior of Roller Plates in Two Environments of C60 Water and Fresh Water in a Pelletizing Unit [Volume 42, Issue 1, 2023, Pages 73-83]
Rouhi, N. Synthesis of Template Free Morphology Controlled α-MnO2 Nanorod and Electrochemical Capacitive Study of its RGO Nanocomposite [Volume 42, Issue 3, 2023, Pages 31-48]
S
Saeidi, R. Evaluation of the Corrosion Performance of Carbon Steel and 316 Stainless Steel in aMDEA Solution Uused in the CO2 Absorption/Desorption Process [Volume 42, Issue 3, 2023, Pages 1-15]
Samimi, A.R. Effect of Magnetic Field and Electrospray Combination on the Orientation of Carbon Nanotubes in Alginate Core-Shell Composite Adsorbent and Methylene Blue Adsorption [Volume 42, Issue 1, 2023, Pages 17-32]
Setoudeh, N. Investigating the Effect of Ball Milling and Heating Processes on the Phase Changes of an Iranian Type of Bauxite [Volume 42, Issue 4, 2024, Pages 61-76]
Shafyei, A. Investigating the Corrosion Behavior of Roller Plates in Two Environments of C60 Water and Fresh Water in a Pelletizing Unit [Volume 42, Issue 1, 2023, Pages 73-83]
Shahbaz, M. Evaluating the Effect of Milling Time on the Microstructural Changes and Phase Analysis of Mg-3Zn Powder Synthesized by Mechanical Alloying [Volume 42, Issue 1, 2023, Pages 45-57]
Sheikh, H. Synthesis of Meso Carbon Micro Beads from Mesophase Pitch by Suspension Method [Volume 42, Issue 3, 2023, Pages 73-92]
Shojaee, F. The Effect of Acid Washing and YAG:Nd Laser Irradiation on Increasing Hydrogen Storage Capacity in Carbon Nanotubes [Volume 42, Issue 3, 2023, Pages 17-29]
Shoja Razavi, R. Synthesis and Characterization of Copper/Silver Core-Shell Nanoparticles Synthesized by Laser Ablation Method Using a Nanosecond Nd:YAG Laser in Acetone [Volume 42, Issue 1, 2023, Pages 59-71]
Sobhani, M. Synthesis of Meso Carbon Micro Beads from Mesophase Pitch by Suspension Method [Volume 42, Issue 3, 2023, Pages 73-92]
Soltani-Nezhad, Sh. Synthesis and Characterization of Ca2+ and Gd3+ Doped Cobalt Ferrite Nanoparticles Coated with Chitosan and Polyethylene Glycol [Volume 42, Issue 1, 2023, Pages 1-16]
T
Tavoosi, M. Evaluation of the Electromagnetic Behavior of TiC/Ti3AlC2 Ceramic Matrix Composites Synthesized by in Situ Method [Volume 42, Issue 1, 2023, Pages 33-44]
Tavoosi, M. The Effect of Carbon Nanotubes in Improving the Electromagnetic Behavior of W-type Hexaferrite Nanoparticles Doped With Mn and Ca Cations [Volume 42, Issue 2, 2023, Pages 53-68]
Tavoosi, M. The Effect of Partial Addition of Silicon on the Electromagnetic Behavior of TiC/Ti3AlC2 Ceramic Matrix Composites [Volume 42, Issue 3, 2023, Pages 49-60]
Torkian, Sh. Synthesis of Meso Carbon Micro Beads from Mesophase Pitch by Suspension Method [Volume 42, Issue 3, 2023, Pages 73-92]
Y
Yahyazameh, M. Evaluating the Effect of Milling Time on the Microstructural Changes and Phase Analysis of Mg-3Zn Powder Synthesized by Mechanical Alloying [Volume 42, Issue 1, 2023, Pages 45-57]
Yousefi, A. R. Synthesis of Meso Carbon Micro Beads from Mesophase Pitch by Suspension Method [Volume 42, Issue 3, 2023, Pages 73-92]
Yousef Saber, F. Synthesis and Characterization of Composite Coating of Iron Oxide and Bioactive Glass, Coated by Electrophoretic co-Deposition Method for Biomedical Applications [Volume 42, Issue 2, 2023, Pages 1-13]
Z
Zamani, Kh. Evaluation of the Electromagnetic Behavior of TiC/Ti3AlC2 Ceramic Matrix Composites Synthesized by in Situ Method [Volume 42, Issue 1, 2023, Pages 33-44]
Zamani, Kh. The Effect of Partial Addition of Silicon on the Electromagnetic Behavior of TiC/Ti3AlC2 Ceramic Matrix Composites [Volume 42, Issue 3, 2023, Pages 49-60]
Zhiani, M. Evaluation of the Corrosion Performance of Carbon Steel and 316 Stainless Steel in aMDEA Solution Uused in the CO2 Absorption/Desorption Process [Volume 42, Issue 3, 2023, Pages 1-15]
