Abdollah-Zadeh, Amir Effect of Gas Pressure and Stand-Off Distance on the Properties of Cold Sprayed Zinc on Steel Substrate [Volume 44, Issue 2, 2025, Pages 37-48]
Aghaie, Farnoush Effect of Calcination Temperature on the Properties of Cobalt Ferrite Nanoparticles Synthesized by the Auto-Combustion Sol-Gel Method in the Presence of Albumin [Volume 44, Issue 3, 2025, Pages 21-40]
Ahmadi, Farhad Preparation and Characterization of Hyaluronic Acid-based Composite Films for Wound Dressing Applications [Volume 44, Issue 4, 2025, Pages 55-73]
Alirezaei, Shahram The Effect of Blackening Treatment on the Corrosion Behavior of Ni-P-CNT Nanocomposite Coatings [Volume 44, Issue 4, 2025, Pages 123-138]
Alizadeh, Mohsen A Study on the Influence of Titanium Addition on the Phase Transformations and Magnetic Properties of FeCrCoNiMn High-Entropy Alloy Powder Prepared by Mechanical Alloying [Volume 44, Issue 3, 2025, Pages 135-149]
Atapoor, Masoud Investigating the Effect of Tempering Temperature on the Microstructure, Hardness and Burst Pressure of 34CrMo4 Steel [Volume 44, Issue 3, 2025, Pages 41-60]
Atapour, Masoud The Effect of Lignin Concentration on the Morphology and Structure of Silk Fibroin Nanofibers [Volume 44, Issue 4, 2025, Pages 1-14]
Azadi, Abolfazl Microstructure and Hardness of Ti-6242 Alloy Fabricated by Electron Beam Powder Bed Fusion and Laser Powder Bed Fusion Methods [Volume 44, Issue 2, 2025, Pages 1-17]
Azimi Roeen, Gh. Investigating the Properties and Behavior of Ag-Cu-Ti-Sn-%5.1 Zr Filler Metal in Dissimilar Bonding of Alumina to Copper [Volume 44, Issue 1, 2025, Pages 15-30]
B
Bagheri, Mehdi The Effect of Blackening Treatment on the Corrosion Behavior of Ni-P-CNT Nanocomposite Coatings [Volume 44, Issue 4, 2025, Pages 123-138]
Bagheri, Mohammad Hossein Study on Thermomechanical Behavior and Extraction of Arrhenius Model and Processing Map for Al-7.5Mg Sheets [Volume 44, Issue 3, 2025, Pages 115-134]
Bagheri, R. Creation of Beta Crystal Structure in Random Polypropylene with the Help of Pimelic Acid-Based Nucleator: the Role of Nucleator Addition Method and the Presence of Isotactic Polypropylene in the Composition [Volume 44, Issue 1, 2025, Pages 31-41]
Baharvandi, H. R. Investigating the Effect of Temperature and Time of the Process of Producing Graphene Quantum Dots by Carbonization on Structural, Microstructural, and Optical Properties [Volume 44, Issue 1, 2025, Pages 71-82]
Bahrami, A. Investigating the Properties and Behavior of Ag-Cu-Ti-Sn-%5.1 Zr Filler Metal in Dissimilar Bonding of Alumina to Copper [Volume 44, Issue 1, 2025, Pages 15-30]
Bakhshi, Saeed-Reza A Study on the Influence of Titanium Addition on the Phase Transformations and Magnetic Properties of FeCrCoNiMn High-Entropy Alloy Powder Prepared by Mechanical Alloying [Volume 44, Issue 3, 2025, Pages 135-149]
Balak, Zohre Investigating the Oxidation Resistance of HfCZrCTiC Composite at 1200 °C: The Role of Nano Carbon Black and Silicon [Volume 44, Issue 3, 2025, Pages 87-99]
Barkat, Masood Statistical-Experimental Investigation of the Effect of Focal Length and Displacement on Laser Drilling of Hastelloy-X Superalloy Sheet using Single Pulse Fiber Laser [Volume 44, Issue 2, 2025, Pages 49-66]
Borhani, Gholam-Hossein A Study on the Influence of Titanium Addition on the Phase Transformations and Magnetic Properties of FeCrCoNiMn High-Entropy Alloy Powder Prepared by Mechanical Alloying [Volume 44, Issue 3, 2025, Pages 135-149]
Borhnai, Mohammad Reza Investigating the Effect of Environment on the Synthesis of Nickel and Nickel Oxide Nanoparticles Using the Laser Ablation Method with a Nanosecond Fiber Laser [Volume 44, Issue 2, 2025, Pages 105-118]
D
Darabi, Mahdi Effect of Amorphous Si₃N₄ Nanoparticles on the Infrared Transmittance of α-Al₂O₃ [Volume 44, Issue 2, 2025, Pages 79-92]
Dehghani, A. The influence of electrode geometry on depth indentation of the resistance spot welding in the joining of steel and magnesium sheets in the car body [Volume 44, Issue 1, 2025, Pages 43-54]
Dehnavi, Mohammad-Reza A Study on the Influence of Titanium Addition on the Phase Transformations and Magnetic Properties of FeCrCoNiMn High-Entropy Alloy Powder Prepared by Mechanical Alloying [Volume 44, Issue 3, 2025, Pages 135-149]
Dorrani, Z. Optimization of Photonic Nanocrystals for Invisibility Using Artificial Intelligence [Volume 44, Issue 1, 2025, Pages 55-70]
E
Ehsani, N. Investigating the Effect of Temperature and Time of the Process of Producing Graphene Quantum Dots by Carbonization on Structural, Microstructural, and Optical Properties [Volume 44, Issue 1, 2025, Pages 71-82]
Emami Ghalehghasemi, Amir Hossein Microstructure and Hardness of Ti-6242 Alloy Fabricated by Electron Beam Powder Bed Fusion and Laser Powder Bed Fusion Methods [Volume 44, Issue 2, 2025, Pages 1-17]
Erfanmanesh, Mohammad Statistical-Experimental Investigation of the Effect of Focal Length and Displacement on Laser Drilling of Hastelloy-X Superalloy Sheet using Single Pulse Fiber Laser [Volume 44, Issue 2, 2025, Pages 49-66]
Eshaghi, Akbar Effect of Amorphous Si₃N₄ Nanoparticles on the Infrared Transmittance of α-Al₂O₃ [Volume 44, Issue 2, 2025, Pages 79-92]
Eskandarinezhad, Sara Investigating the Effect of Deformation Temperature on the Structure and Mechanical Properties of AISI 304 Stainless Steel [Volume 44, Issue 4, 2025, Pages 15-31]
Esmaeilzadeh, Mojtaba Investigating the Adsorption Mechanism of Paracetamol as a Corrosion Inhibitor on the Iron (110) Plane Using First-Principles Calculations [Volume 44, Issue 2, 2025, Pages 93-103]
G
Galati, Manuela Microstructure and Hardness of Ti-6242 Alloy Fabricated by Electron Beam Powder Bed Fusion and Laser Powder Bed Fusion Methods [Volume 44, Issue 2, 2025, Pages 1-17]
Gavahian Jahromi, Mohammad Investigating the Effect of Environment on the Synthesis of Nickel and Nickel Oxide Nanoparticles Using the Laser Ablation Method with a Nanosecond Fiber Laser [Volume 44, Issue 2, 2025, Pages 105-118]
Ghadimi Dafrazi, Mostafa Statistical-Experimental Investigation of the Effect of Focal Length and Displacement on Laser Drilling of Hastelloy-X Superalloy Sheet using Single Pulse Fiber Laser [Volume 44, Issue 2, 2025, Pages 49-66]
Ghadiri, Abolfazl Investigating the Effect of Bentonite Heat Treatment Cycle on the Properties of Iron Ore Pellets [Volume 44, Issue 4, 2025, Pages 33-53]
Ghazvinloo, Hamid Reza Study on Thermomechanical Behavior and Extraction of Arrhenius Model and Processing Map for Al-7.5Mg Sheets [Volume 44, Issue 3, 2025, Pages 115-134]
Ghorbani, H. Creation of Beta Crystal Structure in Random Polypropylene with the Help of Pimelic Acid-Based Nucleator: the Role of Nucleator Addition Method and the Presence of Isotactic Polypropylene in the Composition [Volume 44, Issue 1, 2025, Pages 31-41]
H
Hamidi, Hoda Investigating the Adsorption Mechanism of Paracetamol as a Corrosion Inhibitor on the Iron (110) Plane Using First-Principles Calculations [Volume 44, Issue 2, 2025, Pages 93-103]
Hasani, Saeed Effect of Calcination Temperature on the Properties of Cobalt Ferrite Nanoparticles Synthesized by the Auto-Combustion Sol-Gel Method in the Presence of Albumin [Volume 44, Issue 3, 2025, Pages 21-40]
Hasani, Saeed Investigating the Effect of Deformation Temperature on the Structure and Mechanical Properties of AISI 304 Stainless Steel [Volume 44, Issue 4, 2025, Pages 15-31]
Hasheminiasari, Masoud Investigating the Electrochemical Characteristics of Lithium Vanadium Phosphate Cathode Synthesized by the Solution Combustion Method Utilizing Cetyltrimethylammonium Bromide as a Fuel for Lithium-Ion Batteries Applications [Volume 44, Issue 3, 2025, Pages 101-114]
Heidarian, Atefeh Investigating the Effect of Environment on the Synthesis of Nickel and Nickel Oxide Nanoparticles Using the Laser Ablation Method with a Nanosecond Fiber Laser [Volume 44, Issue 2, 2025, Pages 105-118]
Hosseini Fard, Seyed Mojtaba Preparation and Characterization of Hyaluronic Acid-based Composite Films for Wound Dressing Applications [Volume 44, Issue 4, 2025, Pages 55-73]
J
Jamali, Hossein The Effect of Addition of Mesocarbon Microbeads (MCMB) on the Microstructure, Mechanical Properties, and Friction Coefficient of
MCMB-Cf/SiC Composites Prepared by Spark Plasma Sintering Method [Volume 44, Issue 3, 2025, Pages 61-86]
Johari, Narges Preparation and Evaluation of Hydrogel Wound Dressings Containing Polyvinyl Alcohol, Chitosan, Flax, and Zinc Particles for Chronic Wound Healing [Volume 44, Issue 4, 2025, Pages 75-91]
K
Khalil-Allafi, Jafar Atmospheric Influence on the Structural and Mechanical Properties of TiN Coating Deposited on NiTi Shape Memory Alloy via Mather-Type Dense Plasma Focus [Volume 44, Issue 3, 2025, Pages 1-19]
Khanbabaee Saatloo, Mohammad Hadi Effect of Gas Pressure and Stand-Off Distance on the Properties of Cold Sprayed Zinc on Steel Substrate [Volume 44, Issue 2, 2025, Pages 37-48]
Kharaziha, Mahshid Fabrication and Characterization of Modified Silk Fibroin/Zinc-Based Metal-Organic Framework Composite Hydrogel Using Fenton Reaction for Medical Applications [Volume 44, Issue 2, 2025, Pages 19-35]
Kharaziha, Mahshid The Effect of Lignin Concentration on the Morphology and Structure of Silk Fibroin Nanofibers [Volume 44, Issue 4, 2025, Pages 1-14]
Khoram, Ali Statistical-Experimental Investigation of the Effect of Focal Length and Displacement on Laser Drilling of Hastelloy-X Superalloy Sheet using Single Pulse Fiber Laser [Volume 44, Issue 2, 2025, Pages 49-66]
Khosravi, Hamed Investigation of Positron Annihilation Lifetime Spectroscopy and Tensile Behavior of Graphene Oxide/Epoxy Nanocomposites [Volume 44, Issue 2, 2025, Pages 67-78]
Koohkan, Mohammad Investigation of Positron Annihilation Lifetime Spectroscopy and Tensile Behavior of Graphene Oxide/Epoxy Nanocomposites [Volume 44, Issue 2, 2025, Pages 67-78]
L
Loghman Estraki, Mohammad Reza Effect of Amorphous Si₃N₄ Nanoparticles on the Infrared Transmittance of α-Al₂O₃ [Volume 44, Issue 2, 2025, Pages 79-92]
Loghman Estraki, Mohammad Reza The Effect of Addition of Mesocarbon Microbeads (MCMB) on the Microstructure, Mechanical Properties, and Friction Coefficient of
MCMB-Cf/SiC Composites Prepared by Spark Plasma Sintering Method [Volume 44, Issue 3, 2025, Pages 61-86]
M
Malae Hezarvandi, Shahroukh Investigating the Oxidation Resistance of HfCZrCTiC Composite at 1200 °C: The Role of Nano Carbon Black and Silicon [Volume 44, Issue 3, 2025, Pages 87-99]
Mashreghi, Alireza Investigating the Effect of Deformation Temperature on the Structure and Mechanical Properties of AISI 304 Stainless Steel [Volume 44, Issue 4, 2025, Pages 15-31]
Masoudpanah, Seyed Morteza Investigating the Electrochemical Characteristics of Lithium Vanadium Phosphate Cathode Synthesized by the Solution Combustion Method Utilizing Cetyltrimethylammonium Bromide as a Fuel for Lithium-Ion Batteries Applications [Volume 44, Issue 3, 2025, Pages 101-114]
Mazaheri, Ali Investigating the Effect of Bentonite Heat Treatment Cycle on the Properties of Iron Ore Pellets [Volume 44, Issue 4, 2025, Pages 33-53]
Mehmandoost-Khajeh-Dad, Ali Akbar Investigation of Positron Annihilation Lifetime Spectroscopy and Tensile Behavior of Graphene Oxide/Epoxy Nanocomposites [Volume 44, Issue 2, 2025, Pages 67-78]
Mirzaei, Ali Investigating the Effect of Bentonite Heat Treatment Cycle on the Properties of Iron Ore Pellets [Volume 44, Issue 4, 2025, Pages 33-53]
Moghanian, Amirhossein Study of the Chemical Composition of Two-Component Bioactive Glass 50SiO2-50CaO on an Atomic Scale Using Molecular Dynamics Simulation for Bone Tissue Engineering Applications [Volume 44, Issue 4, 2025, Pages 109-122]
Mohagheghian, Kiana Fabrication and Characterization of Modified Silk Fibroin/Zinc-Based Metal-Organic Framework Composite Hydrogel Using Fenton Reaction for Medical Applications [Volume 44, Issue 2, 2025, Pages 19-35]
Mohammadi, Leila Preparation and Characterization of Hyaluronic Acid-based Composite Films for Wound Dressing Applications [Volume 44, Issue 4, 2025, Pages 55-73]
Mohammadifard, Amirhosein The Effect of Lignin Concentration on the Morphology and Structure of Silk Fibroin Nanofibers [Volume 44, Issue 4, 2025, Pages 1-14]
Mohammad Sharifi, Ehsan Effect of Amorphous Si₃N₄ Nanoparticles on the Infrared Transmittance of α-Al₂O₃ [Volume 44, Issue 2, 2025, Pages 79-92]
N
Naderi-Samani, Ehsan Investigating the Effect of Environment on the Synthesis of Nickel and Nickel Oxide Nanoparticles Using the Laser Ablation Method with a Nanosecond Fiber Laser [Volume 44, Issue 2, 2025, Pages 105-118]
Naderi-Samani, Hamed Investigating the Effect of Environment on the Synthesis of Nickel and Nickel Oxide Nanoparticles Using the Laser Ablation Method with a Nanosecond Fiber Laser [Volume 44, Issue 2, 2025, Pages 105-118]
Nazari, M. Investigating the Effect of Temperature and Time of the Process of Producing Graphene Quantum Dots by Carbonization on Structural, Microstructural, and Optical Properties [Volume 44, Issue 1, 2025, Pages 71-82]
Nilforoushzadeh, Mohammad Ali Preparation and Characterization of Hyaluronic Acid-based Composite Films for Wound Dressing Applications [Volume 44, Issue 4, 2025, Pages 55-73]
Niroumand, Behzad Microstructure and Hardness of Ti-6242 Alloy Fabricated by Electron Beam Powder Bed Fusion and Laser Powder Bed Fusion Methods [Volume 44, Issue 2, 2025, Pages 1-17]
P
Piran, Mohammad Mahdi Investigating the Effect of Tempering Temperature on the Microstructure, Hardness and Burst Pressure of 34CrMo4 Steel [Volume 44, Issue 3, 2025, Pages 41-60]
Pourfath, Mahdi Investigating the Adsorption Mechanism of Paracetamol as a Corrosion Inhibitor on the Iron (110) Plane Using First-Principles Calculations [Volume 44, Issue 2, 2025, Pages 93-103]
R
Raeissi, K. The Effect of Tungsten Addition on Characteristics and Corrosion Performance of Plasma Electrolytic Oxidation Coating Created on Titanium [Volume 44, Issue 1, 2025, Pages 1-13]
Ramazani, Mazaher The Effect of Addition of Mesocarbon Microbeads (MCMB) on the Microstructure, Mechanical Properties, and Friction Coefficient of
MCMB-Cf/SiC Composites Prepared by Spark Plasma Sintering Method [Volume 44, Issue 3, 2025, Pages 61-86]
Rastegar, Azam Preparation and Evaluation of Hydrogel Wound Dressings Containing Polyvinyl Alcohol, Chitosan, Flax, and Zinc Particles for Chronic Wound Healing [Volume 44, Issue 4, 2025, Pages 75-91]
Rasti, Javad Study on Thermomechanical Behavior and Extraction of Arrhenius Model and Processing Map for Al-7.5Mg Sheets [Volume 44, Issue 3, 2025, Pages 115-134]
Rezazadeh, Mohammad The Effect of Addition of Mesocarbon Microbeads (MCMB) on the Microstructure, Mechanical Properties, and Friction Coefficient of
MCMB-Cf/SiC Composites Prepared by Spark Plasma Sintering Method [Volume 44, Issue 3, 2025, Pages 61-86]
S
Saboori, Abdollah Microstructure and Hardness of Ti-6242 Alloy Fabricated by Electron Beam Powder Bed Fusion and Laser Powder Bed Fusion Methods [Volume 44, Issue 2, 2025, Pages 1-17]
Sadeghhi, Mohsen The Effect of Addition of Mesocarbon Microbeads (MCMB) on the Microstructure, Mechanical Properties, and Friction Coefficient of
MCMB-Cf/SiC Composites Prepared by Spark Plasma Sintering Method [Volume 44, Issue 3, 2025, Pages 61-86]
Sedighi, M. The influence of electrode geometry on depth indentation of the resistance spot welding in the joining of steel and magnesium sheets in the car body [Volume 44, Issue 1, 2025, Pages 43-54]
Seraj, Rajab Ali Effect of Gas Pressure and Stand-Off Distance on the Properties of Cold Sprayed Zinc on Steel Substrate [Volume 44, Issue 2, 2025, Pages 37-48]
Shojaei, Fazel Investigating the Adsorption Mechanism of Paracetamol as a Corrosion Inhibitor on the Iron (110) Plane Using First-Principles Calculations [Volume 44, Issue 2, 2025, Pages 93-103]
Shoja Razavi, Reza Statistical-Experimental Investigation of the Effect of Focal Length and Displacement on Laser Drilling of Hastelloy-X Superalloy Sheet using Single Pulse Fiber Laser [Volume 44, Issue 2, 2025, Pages 49-66]
Shoja Razavi, Reza Investigating the Effect of Environment on the Synthesis of Nickel and Nickel Oxide Nanoparticles Using the Laser Ablation Method with a Nanosecond Fiber Laser [Volume 44, Issue 2, 2025, Pages 105-118]
Soltanalipour, Mahdiyeh Atmospheric Influence on the Structural and Mechanical Properties of TiN Coating Deposited on NiTi Shape Memory Alloy via Mather-Type Dense Plasma Focus [Volume 44, Issue 3, 2025, Pages 1-19]
Soltani-Nezhad, Shima Effect of Calcination Temperature on the Properties of Cobalt Ferrite Nanoparticles Synthesized by the Auto-Combustion Sol-Gel Method in the Presence of Albumin [Volume 44, Issue 3, 2025, Pages 21-40]
T
Tabatabaei, Farideh The Effect of Blackening Treatment on the Corrosion Behavior of Ni-P-CNT Nanocomposite Coatings [Volume 44, Issue 4, 2025, Pages 123-138]
Taheri, M. Investigating the Properties and Behavior of Ag-Cu-Ti-Sn-%5.1 Zr Filler Metal in Dissimilar Bonding of Alumina to Copper [Volume 44, Issue 1, 2025, Pages 15-30]
Tahernejad Javazm, Mohammad Investigating the Electrochemical Characteristics of Lithium Vanadium Phosphate Cathode Synthesized by the Solution Combustion Method Utilizing Cetyltrimethylammonium Bromide as a Fuel for Lithium-Ion Batteries Applications [Volume 44, Issue 3, 2025, Pages 101-114]
Tavakoli-Anbaran, Hossein Measurement of the Dose Buildup Factor of Cesium Source Gamma Rays in Polymer Gel Containing Silver Nanoparticles in Different Concentrations [Volume 44, Issue 4, 2025, Pages 93-108]
Tayyebi, Arman Study of the Chemical Composition of Two-Component Bioactive Glass 50SiO2-50CaO on an Atomic Scale Using Molecular Dynamics Simulation for Bone Tissue Engineering Applications [Volume 44, Issue 4, 2025, Pages 109-122]
Torkamani, Shahin Investigating the Effect of Environment on the Synthesis of Nickel and Nickel Oxide Nanoparticles Using the Laser Ablation Method with a Nanosecond Fiber Laser [Volume 44, Issue 2, 2025, Pages 105-118]
V
Vaezi Jazeh, Mohammad Reza Preparation and Characterization of Hyaluronic Acid-based Composite Films for Wound Dressing Applications [Volume 44, Issue 4, 2025, Pages 55-73]
Vaez-Zadeh, Mehdi Investigating the Adsorption Mechanism of Paracetamol as a Corrosion Inhibitor on the Iron (110) Plane Using First-Principles Calculations [Volume 44, Issue 2, 2025, Pages 93-103]
Vafaie, Reza Effect of Amorphous Si₃N₄ Nanoparticles on the Infrared Transmittance of α-Al₂O₃ [Volume 44, Issue 2, 2025, Pages 79-92]
Vahedian Movahed, Ammar Measurement of the Dose Buildup Factor of Cesium Source Gamma Rays in Polymer Gel Containing Silver Nanoparticles in Different Concentrations [Volume 44, Issue 4, 2025, Pages 93-108]
Vojdanpak, Mohammad Kian Fabrication and Characterization of Modified Silk Fibroin/Zinc-Based Metal-Organic Framework Composite Hydrogel Using Fenton Reaction for Medical Applications [Volume 44, Issue 2, 2025, Pages 19-35]
Y
Yazdekhasti, R. The Effect of Tungsten Addition on Characteristics and Corrosion Performance of Plasma Electrolytic Oxidation Coating Created on Titanium [Volume 44, Issue 1, 2025, Pages 1-13]
Yousefi, Alireza The Effect of Addition of Mesocarbon Microbeads (MCMB) on the Microstructure, Mechanical Properties, and Friction Coefficient of
MCMB-Cf/SiC Composites Prepared by Spark Plasma Sintering Method [Volume 44, Issue 3, 2025, Pages 61-86]
Z
Zare, Maryam Preparation and Evaluation of Hydrogel Wound Dressings Containing Polyvinyl Alcohol, Chitosan, Flax, and Zinc Particles for Chronic Wound Healing [Volume 44, Issue 4, 2025, Pages 75-91]
Zareei, Ali Investigating the Effect of Tempering Temperature on the Microstructure, Hardness and Burst Pressure of 34CrMo4 Steel [Volume 44, Issue 3, 2025, Pages 41-60]
