Volume 36, Issue 2 (Journal of Advanced Materials-Summer 2017)                   jame 2017, 36(2): 55-66 | Back to browse issues page



DOI: 10.18869/acadpub.jame.36.2.55

XML Persian Abstract Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Farjam Hajiagha K, Akbari A R, Mohammadzadeh R. Kinetics of Austenite Layer Growth on the Surface of Fe-23Cr-2.4Mo Ferritic Stainless Steel During Solution Nitriding. jame. 2017; 36 (2) :55-66
URL: http://jame.iut.ac.ir/article-1-464-en.html

associate Professor 1. Department of Materials Engineering, Sahand University of Technology, Tabriz, Iran
Abstract:   (572 Views)

In this study, the kinetics of austenite layer growth on the surface of Fe-23Cr-2.4Mo ferritic stainless steel during solution nitriding and the effects of nitrogen adding on microstructure and hardness of the steel have been investigated. Steel plates of 2 mm thick were solution-nitrided at 1200˚C under nitrogen pressure of 0.25 MPa for 2, 3, 6, 9, 12 hours. Microstructure, the thickness of austenite layer and the hardnes of the nitrided samples, were investigated by using optical microscope, X-ray Diffraction (XRD) and microhardness measurements. The results showed that during solution nitriding, nitrogen diffuses through the lattice and grain boundaries and transforms ferrite to austenite phase, with average nitrogen diffusion coefficient of 6.54×10-5 mm2s-1. The thickness of the austenite layer formed on the samples surfaces increased proportional to the square root of the nitriding time, so that after 12 hours niriding, the whole thickness of the ferritic sample with hardness of 262 HV0.1 transformed to austenite with hardness of 420 HV0.1.

Full-Text [PDF 981 kb]   (148 Downloads)    
Type of Study: Research | Subject: Special
Received: 2015/01/24 | Accepted: 2016/10/1 | Published: 2017/09/4

Add your comments about this article : Your username or Email:
Write the security code in the box

Send email to the article author


© 2015 All Rights Reserved | Journal of Advanced Materials in Engineering (Esteghlal)

Designed & Developed by : Yektaweb

تحت نظارت وف بومی آسپا-وف