Volume 33, Issue 1 (Journal of Advanced Materials- Summer 2014)                   jame 2014, 33(1): 21-31 | Back to browse issues page

XML Persian Abstract Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

P. Safaie, G. H. Borhani, S. R. Bakhshi. Phase Evaluation of Alloyed and Composed Molybdenum disilicide by Al and TiC. jame. 2014; 33 (1) :21-31
URL: http://jame.iut.ac.ir/article-1-567-en.html
Department of Materials Engineering, Malek Ashtar University of Technology , pouriadaneshjo@gmail.com
Abstract:   (6184 Views)
In this study, pure powders such as molybdenum, silicon, aluminum and titanium carbide were utilized to produce MoSi2 compound, MoSi2 /20 Vol % TiC composite, MoSi2-x Al alloyed compound and MoSi2-x Al/20 Vol % TiC alloyed composite. The initial powders were mixed in specified ratios, and then, were activated by mechanical milling. Milled powders were compacted, synthesized and sintered in the temperature range of 1100 -1400 oC. SEM was used to investigate the microstructural change and XRD for identification of phases. Effect of aluminum addition on phase formation was investigated. Addition of aluminum by over 9 atomic percent resulted in the formation of Mo(Si,Al)2 in alloyed matrix.
Full-Text [PDF 795 kb]   (1868 Downloads)    
Type of Study: Research | Subject: General
Received: 2015/02/9 | Accepted: 2015/05/6 | Published: 2015/05/6

Add your comments about this article : Your username or Email:
CAPTCHA

Send email to the article author


Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

© 2021 CC BY-NC 4.0 | Journal of Advanced Materials in Engineering (Esteghlal)

Designed & Developed by : Yektaweb