Volume 33, Issue 3 (Journal of Advanced Materials- winter 2015)                   jame 2015, 33(3): 1-11 | Back to browse issues page

XML Persian Abstract Print

Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

reza eshghi, s.m.hadavi, v.varmazyar. Investigation of Mechanical Properties in Brazing of Ti-6Al-4V and SS410 in Vacuum. jame. 2015; 33 (3) :1-11
URL: http://jame.iut.ac.ir/article-1-593-en.html
, reza412_eshghi@yahoo.com
Abstract:   (6224 Views)
In this research, Ti-6Al-4V alloy was brazed with 410 stainless steel by three different filler metals as silver-base, nickel-base, and titanium-base alloys. In order to obtain optimum clearance, brazing was done in three different clearances of 0.02, 0.04 and 0.06 mm. Also, the strength and hardness of the brazing zone were investigated. The results of shear strength showed that the brazed samples with titanium-base alloy at the clearance of 0.02 mm had the maximum strength among the different samples which was 149.5 MPa.
Full-Text [PDF 7642 kb]   (1652 Downloads)    
Type of Study: Research | Subject: General
Received: 2015/03/11 | Accepted: 2015/03/11 | Published: 2015/03/11

Add your comments about this article : Your username or Email:

Send email to the article author

Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

© 2021 CC BY-NC 4.0 | Journal of Advanced Materials in Engineering (Esteghlal)

Designed & Developed by : Yektaweb