Volume 33, Issue 3 (Journal of Advanced Materials- winter 2015)                   jame 2015, 33(3): 1-11 | Back to browse issues page

XML Persian Abstract Print

Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

reza eshghi, s.m.hadavi, v.varmazyar. Investigation of Mechanical Properties in Brazing of Ti-6Al-4V and SS410 in Vacuum. jame. 2015; 33 (3) :1-11
URL: http://jame.iut.ac.ir/article-1-593-en.html

Abstract:   (2462 Views)
In this research, Ti-6Al-4V alloy was brazed with 410 stainless steel by three different filler metals as silver-base, nickel-base, and titanium-base alloys. In order to obtain optimum clearance, brazing was done in three different clearances of 0.02, 0.04 and 0.06 mm. Also, the strength and hardness of the brazing zone were investigated. The results of shear strength showed that the brazed samples with titanium-base alloy at the clearance of 0.02 mm had the maximum strength among the different samples which was 149.5 MPa.
Full-Text [PDF 7642 kb]   (711 Downloads)    
Type of Study: Research | Subject: General
Received: 2015/03/11 | Accepted: 2015/03/11 | Published: 2015/03/11

Add your comments about this article : Your username or Email:
Write the security code in the box

Send email to the article author

© 2015 All Rights Reserved | Journal of Advanced Materials in Engineering (Esteghlal)

Designed & Developed by : Yektaweb

تحت نظارت وف بومی آسپا-وف