Volume 33, Issue 3 (Journal of Advanced Materials- winter 2015)                   jame 2015, 33(3): 125-140 | Back to browse issues page

XML Persian Abstract Print

Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

P. Zarrabian, M. Kalantar, M. Mosallaeepour, A. Mashreghi. Fabrication and Characterization of Nickel Ferrite Based Inert Anodes for Aluminum Electrolysis . jame. 2015; 33 (3) :125-140
URL: http://jame.iut.ac.ir/article-1-602-en.html
, Mkalantar@yazd.ac.ir
Abstract:   (8792 Views)
Nickel ferrite based cermets and their relevant composites have been widely used as inert anodes for aluminum electrolysis due to their good combination of chemical resistance, thermal stability and mechanical properties. In this study, various NiO/NiFe2O4 composites consisting of 5, 10 and 15% NiO in conjunction with Cu/NiFe2O4 cermets containing 0.5, 10 and 15% Cu were prepared by powder metallurgy method. The degradation resistance of the developed inert composites was examined under hot corrosion condition by plunging samples in to the molten electrolyte at 1000ºC. The strength, toughness, hardness, relative density, microstructural observation, phase analysis and electrical resistivity were evaluated by 3-points bending tests, Vickers method, Archimedes method, scanning electron microscope, x-ray diffraction and conventional direct current four-probe techniques, respectively. The experimental results for NiO/NiFe2O4 composites showed that a significant improvement of toughness and degradation resistance continuously occurred with a moderate decrease in strength by increasing NiO content, while the relative density was increased only up to 5%NiO content. By increasing the Cu content in the cermet samples, all the properties such as strength, toughness and electrical conductivity were improved considerably but the degradation resistance decreased.
Full-Text [PDF 11607 kb]   (2192 Downloads)    
Type of Study: Research | Subject: General
Received: 2015/03/15 | Accepted: 2015/03/15 | Published: 2015/03/15

Add your comments about this article : Your username or Email:

Send email to the article author

Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

© 2022 CC BY-NC 4.0 | Journal of Advanced Materials in Engineering (Esteghlal)

Designed & Developed by : Yektaweb