Volume 34, Issue 1 (Journal of Advanced Materials-Spring 2015)                   jame 2015, 34(1): 1-8 | Back to browse issues page

XML Persian Abstract Print

Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Alizadeh M, Mirzaei M. Effect of Al2O3 Particles on Mechanical Properties of Al-(0-40%)Al2O3 Composite Foams Produced by Low Energy Mechanical Alloying. jame 2015; 34 (1) :1-8
URL: http://jame.iut.ac.ir/article-1-636-en.html
, m_mirzaee1355@yahoo.com
Abstract:   (7678 Views)

In this study, at first Al-Al2O3 composite powders having different volume fractions of Al2O3 (0, 10, 20, 30 and 40 vol.%) were produced by low energy mechanical alloying, which were used as foam materials. Then, composite foams with 50, 60, and 70 percent of porosity were produced by space-holder technique. Spherical carbamide particles (1-1.4 mm) were used to achieve spherical porosities. In order to investigate the compressive behavior of foams, the compression test with strain rate of 10-3 S-1 was performed on the foam samples. The results showed that the compressive properties depended on the volume fraction of Al2O3 and porosity fraction. Generally, by decreasing the porosity fraction, the compressive properties were improved. The composite foams containing 10 vol.% Al2O3 showed superior compressive properties in comparison to other foams studied in this work.

Full-Text [PDF 1023 kb]   (2632 Downloads)    
Type of Study: Research | Subject: Surface engineering and coatings
Received: 2015/06/28 | Accepted: 2015/06/28 | Published: 2015/06/28

Add your comments about this article : Your username or Email:

Send email to the article author

Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

© 2022 CC BY-NC 4.0 | Journal of Advanced Materials in Engineering (Esteghlal)

Designed & Developed by : Yektaweb