Volume 34, Issue 4 (Journal of Advanced Materials-winter 2016)                   jame 2016, 34(4): 61-72 | Back to browse issues page

XML Persian Abstract Print

Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Atapour M, Dana M, Ashrafizadeh F. Effect of Grain Size on the Corrosion Behavior of 304L Stainless Steel. jame 2016; 34 (4) :61-72
URL: http://jame.iut.ac.ir/article-1-751-en.html
Department of Materials Engineering, Isfahan University of Technology, Isfahan, Iran , m.atapour@cc.iut.ac.ir
Abstract:   (10539 Views)

In this investigation, the effect of grain size on the corrosion behavior of 304L stainless steel has been studied. Samples with grain sizes of 0.5, 3 and 12 micrometers were fabricated through formation of strain-induced martensite by 80% cold rolling of the stainless steel sheets at -15 °C and its reversion to austenite during annealing at 900 °C for 1, 5 and 180 min. The corrosion behavior of samples with different grain sizes was investigated by cyclic polarization experiments and  immersion tests in 0.1 M hydrochloric acid (HCl). The polarisation tests showed no differences in uniform corrosion rates of the samples. The results of the cyclic polarisation and immersion tests showed that decreasing the grain size improved the pitting corrosion resistance from 290 mVAg/Agcl for grain size of 12 micrometers to 420 mVAg/Agcl for grain size of 0.5 micrometers.

Full-Text [PDF 1270 kb]   (3941 Downloads)    
Type of Study: Research | Subject: General
Received: 2016/03/5 | Accepted: 2016/03/5 | Published: 2016/03/5

Add your comments about this article : Your username or Email:

Send email to the article author

Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

© 2022 CC BY-NC 4.0 | Journal of Advanced Materials in Engineering (Esteghlal)

Designed & Developed by : Yektaweb