Volume 35, Issue 4 (Journal of Advanced Materials-Winter 2017)                   jame 2017, 35(4): 13-25 | Back to browse issues page

XML Persian Abstract Print

Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Mouchani P, Sarraf Mamoori R, Riahi Noori N. Optimization of the Silver Nanoparticles Synthesis and Printing a Conductive Pattern . jame. 2017; 35 (4) :13-25
URL: http://jame.iut.ac.ir/article-1-874-en.html
, parastoo.mouchani@gmail.com
Abstract:   (7647 Views)

In this study, the parameters affecting the synthesis of silver nanoparticles were optimized by green chemical reduction method to make a conductive pattern. The raw materials used in this study, include silver nitrate as a source of
silver ions, polyvinylpyrrolidone as surface stabilizer, and glucose as the reducing agent. Effective parameters were investigated
by Taguchi statistical design, to determine the optimum conditions and achieve the smallest average particle size. Silver nanoparticles were characterized by X-ray diffraction and field emission scanning electron microscopy. The smallest particle size can be applied by solution adding rate of 0.1 ml/min, temperature 90 °C, weight ratio of glucose to silver nitrate 3 g/g and weight ratio of Polyvinylpyrrolidone to silver nitrate 3.2 g/g. According to.our expectation 20 nm silver nanoparticles were obtained in this condition. FE-SEM confirmed the above results and showed nanoparticles with a size of 25 nm. Finally, A conductive pattern was printed on a glass substrate with synthesized powder. The electrical resistance of the printed pattern was 0.088× 10 -4 Ω.cm.

Full-Text [PDF 912 kb]   (2702 Downloads)    
Type of Study: Research | Subject: Welding and joining
Received: 2017/02/18 | Accepted: 2017/02/18 | Published: 2017/02/18

Add your comments about this article : Your username or Email:

Send email to the article author

Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

© 2021 CC BY-NC 4.0 | Journal of Advanced Materials in Engineering (Esteghlal)

Designed & Developed by : Yektaweb