Volume 36, Issue 1 (Journal of Advanced Materials-Spring 2017)                   jame 2017, 36(1): 53-70 | Back to browse issues page



DOI: 10.18869/acadpub.jame.36.1.53

XML Persian Abstract Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Hosseini S R, Barati M, Maghsoudi E. Evaluation of Temperature Distribution in Thermal Forming Process of Steel Plate by Oxy-gas Source Line Heating . jame. 2017; 36 (1) :53-70
URL: http://jame.iut.ac.ir/article-1-922-en.html

Department of Materials Engineering, Maleke-Ashtar University of Technology, Isfahan, Iran
Abstract:   (879 Views)

The aim of the present research is calculation and determination of the temperature distribution in the oxy-gas source line heating process for application in the steel plates. Analytical method was used to calculate the temperature distribution by solving mathematical equations. The temperature distribution was determined with numerical method using MATLAB software. A computerized numerical control line heating apparatus was used for carrying out the processes. ITI thermograph camera was used to measure the temperature. The effect of torch distance, gas flow and torch speed on the temperature distribution at the upper and lower surfaces of plate were evaluated. The changes of temperature distribution were achieved at torch speeds of 120, 200 and 300 mm/min, gas flow of 10, 9 and 8 lit/min and torch distances of 30, 40 and 50 mm. Calculated and measured maximum temperatures reached to 900, 810 and 720 K, and 885, 785, 690 K, at torch speeds of 120, 200, 300 mm/min, respectively. The calculated and measured maximum temperatures at gas flow of 10, 9, 8 lit/min are attained to be 900, 810 and 750 K, and 885, 795 and 740 K, respectively. Maximum calculated and measured temperatures at torch distance of 30, 40 and 50 mm are accomplished to be 900, 880 and 810 K and 885, 840 and 790 K, respectively.
 

Full-Text [PDF 841 kb]   (202 Downloads)    
Type of Study: Applicable | Subject: General
Received: 2017/06/20 | Accepted: 2017/06/20 | Published: 2017/06/20

Add your comments about this article : Your username or Email:
Write the security code in the box

Send email to the article author


© 2015 All Rights Reserved | Journal of Advanced Materials in Engineering (Esteghlal)

Designed & Developed by : Yektaweb

تحت نظارت وف بومی آسپا-وف