Volume 37, Issue 1 (Journal of Advanced Materials-Spring 2018)                   jame 2018, 37(1): 1-9 | Back to browse issues page

XML Persian Abstract Print

Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Akbari G, Enayati M H, Minouei H. Evaluation of the Microstructure of Ni-Nb-Si Alloy During Mechanical Alloying. jame. 2018; 37 (1) :1-9
URL: http://jame.iut.ac.ir/article-1-925-en.html
1. Department of Metallurgy and Materials Science, Shahid Bahonar University of Kerman, Kerman, Iran. , h_minouie@yahoo.com
Abstract:   (5806 Views)

In the present study, the mechanical alloying process was used to produce the Ni-Nb-Si amorphous alloy. X-ray diffraction (XRD)analysis and high-resolution transmission electron microscopy (HRTEM) were used to approve the amorphous phase formation after 12 hours of mechanical alloying. The results obtained from the SEM morphological images of powder particles during mechanical alloying showed that increasing the milling time caused the reduction  of the powder particles size and uniformity in the shape of the particles. Enhancing the embrittlement and fracturing rate caused brittleness and the  increase in the  failure rate; these were followed by a decrease in the powder particle size to 1-5μm. Cold welding and flattening of the pure elemental powders after mechanical alloying for 2 hours formed a lamellar structure of the alternative layers of different elements lying over each other. SEM image of cross-section of powder particles showed that by increasing the milling time, the interlamellar spacing was decreased, the elements were distributed more uniformly, and finally, a uniform structure of theamorphous phase was completed.

Full-Text [PDF 2062 kb]   (878 Downloads)    
Type of Study: Research | Subject: Powder materials
Received: 2017/07/9 | Accepted: 2017/10/7 | Published: 2018/05/30

Add your comments about this article : Your username or Email:

Send email to the article author

Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

© 2021 CC BY-NC 4.0 | Journal of Advanced Materials in Engineering (Esteghlal)

Designed & Developed by : Yektaweb