Investigation of Reaction Mechanism, Structure and Mechanical Properties of the In-situ Composites Fabricated in Al-V2O5-NiO System

1. Sabrahmanyam, J., and Vijayakumar, M., “Self-Propagating High-Temperature Synthesis”, Journal of Material Science, Vol. 27(23), pp. 6249-6273, 1992.
2. Schaffer, G.B., and Hall, B.J., “The Influence of The Atmosphere on the Sintering of Aluminum”, Metallurgical and Materials Transactions; Vol. 33 (10)A, pp. 3279, 2002.
3. Bin, Y., Guoxiang Ch., and Jishan Z., “Effect of Ti/C Additions on the Formation of Al3Ti Of In Situ TiC/Al Composite”, Materials and Design, Vol. 22, pp. 645-650, 2001.
4. Zhao, D., Liu, P., Bian, X., and Liu, X., “Microstructure and Mechanical Properties of In Situ Synthesized (TiB2+Al2O3)/Al–Cu Composites”, Journal Of Materials Processing Technology, Vol. 189, pp. 237–241, 2007.
5. Zhou, Y., Zhenyang, Y., Zhao, N., and Chunsheng, Sh., “Microstructure and Properties of In Situ Generated MgAl2O4 Spinel Whisker Reinforced Aluminum Matrix Composites”, Materials and Design, Vol. 46, pp. 724-730, 2013.
6. Ruixiao, Zh., Han, Y., and Tong, L., “Microstructure and Mechanical Properties of Aluminum Alloy Matrix Composites Reinforced with Fe-Based Metallic Glass Particles” , Materials and Design, Vol. 53 , pp. 512–518, 2014.
7. Zhang, L., Gan, G.S., and Yang, B., “Microstructure and Property Measurements on In Situ TiB2/70Si–Al Composite for Electronic Packaging Applications”, Materials and Design, Vol. 36, pp. 177-181, 2012.
8. Lekatou, A., Karantzalis, A.E., Evangelou, A., and Gousia, V., “Aluminum Reinforced by WC and TiC Nanoparticles (Ex-Situ) and Aluminide Particles (In-Situ): Microstructure, Wear and Corrosion Behavior”, Materials and Design, Vol. 65,
pp. 1121-1135, 2014.
9. Chen, Z.C., Takeda, T., and Ikeda, K., “Microstructural Evolution of Reactive-Sintered Aluminum Matrix Composites”, Composites Science and Technology, Vol. 68, pp. 2245-2253, 2008.
10. Woo, K., Kim, J., and Kwon, E.P., “Fabrication of Al Matrix Composite Reinforced with Submicrometer-Sized Al2O3 Particles Formed by Combustion Reaction between HEMM Al and V2O5 Composite Particles during Sintering”, Mettalurgy Material, Vol. 16(2), pp. 213-218, 2010.
11. Taherzadeh, R.T., Mousavian, Sharafi, S., and Shariat, M.H, “Microwave-Assisted Combustion Synthesis in A Mechanically Activated Al–TiO2–H3BO3 System”, International Journal of Refractory Metals and Hard Materials, Vol. 29, pp. 281-288, 2011.
12. Rosenband, V., Torkar, M., and Gany, A., “Self-Propagating High-Temperature Synthesis of Complex Nitrides of Intermetallics”, Intermetallics, Vol. 14, pp. 551-559, 2006.
13. Wang, L., and Arsenault, R.J, “Interfaces in XD Processed TiB2/NiAl Composites”, Metallurgical Transactions A, Vol. 22(12), pp. 3013-3018, 1991.
14. Samuel, J., Dilip, J., and Reddyb, B.S.B., “Mechanical Thermal Synthesis of In Situ Al Based Hybrid Nanocomposites in Al–Ni–Ti–O System”, Journal of Alloys and Compounds, Vol. 490,
pp. 103-109, 2010.
15. Ai, T.T., “Microstructures and Mechanical Properties of In-Situ Al2O3/TiAl Composites by Exothermic Dispersion Method”, Acta Metallurgica Sinica(English Letters), Vol. 21, Number 6,
pp. 437-443, Dec. 2008.
16. Ivanov, E., Grigorieva, T., Golubkova, G., and Boldyrev, V., “Synthesis of Nickel Aluminides by Mechanical Alloying”, Materials Letter, Vol. 7, Issue 51, 1988.
17. Anvari, S.Z., Karimzadeh, F., and Enayati, M.H., “Synthesis and Characterization of NiAl–Al2O3 Nanocomposite Powder by Mechanical Alloying”, Journal of Alloys and Compounds, Vol. 477,
pp. 178-181, 2009.
18. Yazdian, N., Karimzadeh, F., and Enayati, M.H., “In-Situ Fabrication of Al3V/Al2O3 Nanocomposite through Mechanochemical Synthesis and Evaluation of its Mechanism”, Advanced Powder Technology, Vol. 24, pp. 106-112, 2013.
19. Omran, A., “Fabrication and Characterization of Al-Based in Situ Composites Reinforced by Al3V Intermetallic Compounds”, Journal of Scientific Research, Vol. 2(2), pp. 26-34, 2014.
20. Delgado, J., “Standard Test Method for Water Absorption, Bulk Density, Apparent Porosity, and Apparent Specific Gravity of Fired Whiteware Products”, ASTM C373-88, 2006.
22. Bahrami Motlagh, E., Nasiri, H., Vahdati Khaki, J., and Haddad Sabzevar, M., “Formation of Metal Matrix Composite Reinforced with Nano Sized Al2O3+Ni–Al Intermetallics during Coating of Al Substrate via Combustion Synthesis”, Surface & Coatings Technology, Vol. 205, pp. 5515-5520, 2011.
23. Zhu, H., Ai, Y., and Li, J., “In Situ Fabrication of Α-Al2O3 and Ni2Al3 Reinforced Aluminum Matrix Composites in an Al–Ni2O3 System”, Advanced Powder Technology, Vol. 22, pp. 629-633, 2011.
24. Zhu, H., Min, J., Ai, Y., Chu, D., and Wang, H., “The Reaction Mechanism and Mechanical Properties of The Composites Fabricated in an Al-Zro2-C System”, Materials Science and Engineering A, Vol. 527, pp. 6178-6183, 2010.
25. Baker, H., ASM Metals Handbook, “Alloy Phase Diagrams”, Vol. 3, pp. 282 and 1262.
26. Hossein-Zadeh, M., Mirzaee, O., and Saidi, P., “Structural and Mechanical Characterization of Al-Based Composite Reinforced with Heat Treated Al2O3 Particles”, Materials and Design, Vol. 54,
pp. 245-250, 2014.
27. Yang, H., and Mccormic, P.G., “Mechanochemical Reduction of V2O5”, Journal of Solid State Chemistry, Vol. 110, pp. 136-141, 1994.
28. Zhu, H.X., and Abbaschian, R., “In-Situ Processing of NiAl–Alumina Composites by Thermite Reaction”, Materials Science and Engineering A, Vol. 282, pp. 1-7, 2000.