Journal of Advanced Materials in Engineering

Journal of Advanced Materials in Engineering

Investigating the Effect of Environment on the Synthesis of Nickel and Nickel Oxide Nanoparticles Using the Laser Ablation Method with a Nanosecond Fiber Laser

Document Type : Original Article

Authors
Shahin Torkamani 1
Hamed Naderi-Samani 1
Reza Shoja Razavi 1
Mohammad Gavahian Jahromi 1
Ehsan Naderi-Samani 1
Mohammad Reza Borhnai 1
Atefeh Heidarian 2
1 Faculty of Materials and Manufacturing Technologies, Malek Ashtar University of Technology, Iran
2 Faculty of Materials and Metallurgical Engineering, Amirkabir University of Technology, Iran
10.47176/jame.44.2.1060
Abstract
Introduction and Objectives: Nickel nanoparticles are utilized in electronic printing, multilayer ceramic capacitors, magnetic devices, and supercapacitor electrodes in the electronics industry due to their favorable physical, chemical, and magnetic properties, low cost, and optimal sintering temperature. The objective of this study is to synthesize nickel nanoparticles via laser ablation in liquid.
Materials and Methods: To characterize the synthesized nanoparticles, field-emission scanning electron microscopy, dynamic light scattering, X-ray diffraction, and ultraviolet-visible spectroscopy were employed.
Results: The results revealed that nanoparticles synthesized in distilled water consisted of nickel nanoparticles with FCC crystalline structure and a nickel/nickel oxide (Ni/NiO) core-shell structure. These particles exhibited an average size of 70 nm, spherical morphology, and a rough surface. In contrast, nanoparticles synthesized in a solvent containing Polyvinylpyrrolidone as a stabilizer comprised pure nickel nanoparticles with an average size of 60 nm, spherical morphology, and an FCC crystalline structure. The Polyvinylpyrrolidone-stabilized nanoparticles, owing to their uniform morphology, narrow particle size distribution, and absence of oxide formation, are a promising candidate for nickel nanoparticle synthesis.
Conclusion: The nickel nanoparticles synthesized in the Polyvinylpyrrolidone-containing solvent, due to their optimal morphology, uniform particle size distribution, and lack of oxide formation, are well-suited for the production of conductive inks.
Keywords
Laser ablation
Nickel nanoparticle synthesis
Polyvinylpyrrolidone (PVP) stabilizer
Nanosecond laser
Subjects
  1. Zhang HX, Wu XX, Tao R, Shi LJ, Zhu CY, Li QZ. A Study on the anti-electromagnetic radiation performance of fabric with silver-plated fibers. Adv Mater Res. 2011;332:878-81. https://doi.org/10.4028/www.scientific.net/AMR.332-334.878
  2. Sonehara M, Noguchi S, Kurashina T, Sato T, Yamasawa K, Miura Y. Development of an electromagnetic wave shielding textile by electroless Ni-based alloy plating. IEEE Trans Magn. 2009;45(10): 4173-5. https://doi.org/10.1109/TMAG.2009.2021403
  3. Ganjali M, Ganjali M, Sangpour P. Synthesis of bimetallic nanoalloy layer using simultaneous laser ablation of monometallic targets. J Appl Spectrosc. 2014; 80(6):991-7. https://doi.org/10.1007/s10812-014-9877-x
  4. Ganjali M, Ganjali M, Khoby S, Meshkot MA. Synthesis of Au-Cu nano-alloy from monometallic colloids by simultaneous pulsed laser targeting and stirring. Nanomicro Lett. 2011;3:256-63. http://dx.doi.org/10.3786/nml.v3i4.p256-263
  5. Kumar R, Mondal K, Panda PK, Kaushik A, Abolhassani R, Ahuja R, et al. Core–shell nanostructures: perspectives towards drug delivery applications. J Mater Chem B. 2020;8(39):8992-9027. https://doi.org/10.1039/D0TB01559H
  6. Pajor-Swierzy A, Szczepanowicz K, Kamyshny A, Magdassi S. Metallic core-shell nanoparticles for conductive coatings and printing. Adv Colloid Interface Sci. 2022;299:102578. https://doi.org/10.1016/j.cis.2021.102578
  7. Panahi A, Monsef R, Hussein SA, Hammood SA, Al-Azzawi WK, Raffik DE, et al. Multidisciplinary methods for synthesis of visible-light-driven TmVO4 nanostructure photocatalyst with enhanced photocatalytic activity towards removal of toxic contaminates. Int J Hydrogen Energy 2023;48(85): 33155-65. https://doi.org/10.1016/j.ijhydene.2023.05.125
  8. Kim CK, Lee G-J, Lee MK, Rhee CK. A novel method to prepare Cu@ Ag core–shell nanoparticles for printed flexible electronics. Powder Technol. 2014;263:1-6. https://doi.org/10.1016/j.powtec.2014.04.064
  9. Jamdar M, Monsef R, Ganduh SH, Dawi EA, Jasim LS, Salavati-Niasari M. Unraveling the potential of sonochemically achieved DyMnO3/Dy2O3 nanocomposites as highly efficient visible-light-driven photocatalysts in decolorization of organic contamination. Ecotoxicol Environ. Saf. 2024;269:115801. https://doi.org/10.1016/j.ecoenv.2023.115801
  10. Naderi-Samani H, Razavi RS, Abbaszadeh H, Amiri-Moghaddam A, Mashhadi M, Alizadeh A. Synthesis of WC-Co composite powder by in-situ solid carbothermic reduction method. In: Advanced Ceramics Materials - Emerging Technologies. IntechOpen; 2025. https://doi.org/10.5772/intechopen.1007857
  11. Amin Y, Chen Q, Zheng L-R, Tenhunen H. Development and Analysis of Flexible UHF RFID Antennas for Green. Prog Electromagn Res. 2012; 130:1-15. https://doi.org/10.2528/PIER12060609
  12. Rahman A, Guisbiers G. Synthesis of Nickel-Based Nanoparticles by Pulsed Laser Ablation in Liquids: Correlations between Laser Beam Power, Size Distribution and Cavitation Bubble Lifetime. Metals 2024;14(2):224. https://doi.org/10.3390/met14020224
  13. Esmaeili E, Salavati-Niasari M, Mohandes F, Davar F, Seyghalkar H. Modified single-phase hematite nanoparticles via a facile approach for large-scale synthesis. Chem Eng J. 2011;170(1):278-85. https://doi.org/10.1016/j.cej.2011.03.010
  14. Naderi Samani H. Synthesis and study of properties of copper/silver core-shell nanoparticles by laser ablation for use in conductive ink [PhD thesis]. Tehran: Malek Ashtar University of Technology; 2023.
  15. Naderi-Samani H, Razavi RS, Loghman-Estarki MR, Ramazani M. The effects of organoclay on the morphology and mechanical properties of PAI/clay nanocomposites coatings prepared by the ultrasonication assisted process. Ultrason Sonochem. 2017;38:306-16. https://doi.org/10.1016/j.ultsonch.2017.03.009
  16. Nikov RG, Nedyalkov N, Karashanova D. Laser ablation of Ni in the presence of external magnetic field: Selection of microsized particles. Appl Surf Sci. 2020;518:146211. https://doi.org/1016/j.apsusc.2020.146211
  17. Naderi-Samani H, Shoja Razavi R, Mozaffarinia R. Investigating the Effect of Laser Wavelength and Environment on the Synthesis of Copper and Copper Oxide Nanoparticles by Nanosecond Nd: YAG Laser in Liquid. J Adv Mater (Esteghlal) 2024;43(1):27-39. https://doi.org/47176/jame.43.1.1037
  18. Naderi-Samani E, Shoja Razavi R, Gholampour M, PooladZadeh M, Naderi-Samani H. Investigating Optical Properties, Morphology and Size of Silver Nanoparticles Prepared by Nanosecond Nd:YAG Laser in Liquid. New Process Mater Eng. 2024;18(2):47-61. https://doi.org/71753/ma.2024.1089865
  19. Creighton JA, Eadon DG. Ultraviolet–visible absorption spectra of the colloidal metallic elements. J Chem Soc. 1991;87(24):3881-91. https://doi.org/10.1039/FT9918703881
  20. Jung HJ, Choi MY. Specific solvent produces specific phase Ni nanoparticles: a pulsed laser ablation in solvents. J Phys Chem C. 2014;118(26): 14647-54. https://doi.org/10.1021/jp503009a
  21. Ghdhaib BM, Rashid SN. Characterization of Nickel and Nickel Oxide Nanoparticles Prepared by Laser Ablation Technique: Effect of Laser Wavelength and Energy. Iraqi J Appl Phys. 2024;20(3):477-484.
  22. Choi H, Kim HS. In situ synthesis and stabilization of PVP-coated aluminum nanoparticles by one-step pulsed laser ablation in liquid: Investigation and quantification of PVP coverage effects. Surf Interfaces 2023;43: 103594. https://doi.org/10.1016/j.surfin.2023.103594
  23. Lasemi N, Rupprechter G, Liedl G, Eder D. Near-infrared femtosecond laser ablation of Au-coated Ni: effect of organic fluids and water on crater morphology, ablation efficiency and hydrodynamic properties of NiAu nanoparticles. Mater. 2021;14(19): 5544. https://doi.org/10.3390/ma14195544
  24. Karami M, Ghanbari M, Amiri O, Salavati-Niasari M. Enhanced antibacterial activity and photocatalytic degradation of organic dyes under visible light using cesium lead iodide perovskite nanostructures prepared by hydrothermal method. Sep Purif Technol. 2020;253: 117526. https://doi.org/10.1016/j.seppur.2020.117526
  25. Hadi AA, Badr BA, Mahdi RO, Khashan KS. Rapid laser fabrication of Nickel oxide nanoparticles for UV detector. Optik 2020;219:165019. https://doi.org/10.1016/j.ijleo.2020.165019
  26. Ganjali M, Vahdatkhah P, Marashi S. Synthesis of Ni nanoparticles by pulsed laser ablation method in liquid phase. Procedia Mater Sci. 2015;11:359-63. https://doi.org/10.1016/j.mspro.2015.11.127
  27. Naderi-Samani H, Razavi RS, Mozaffarinia R. Investigating the effect of 532 nm and 1064 nm wavelengths and different liquid media on the qualities of silver nanoparticles yielded through laser ablation. Mater Chem Phys. 2023;305:128001. https://doi.org/10.1016/j.matchemphys.2023.128001
  28. Musaev O, Yan J, Dusevich V, Wrobel J, Kruger M. Ni nanoparticles fabricated by laser ablation in water. Appl Phys A. 2014;116:735-9. https://doi.org/10.1007/s00339-014-8569-y
  29. Naderi-Samani H, Razavi RS. Synthesis of nanoparticles using pulsed laser. In: Pulsed Laser Ablation - Recent Advances and Applications. IntechOpen; 2024. https://doi.org/10.5772/intechopen.1004415

 

 

 

Journal of Advanced Materials in Engineering
Volume 44, Issue 2
2025
Pages 105-118

تحت نظارت وف بومی