1. Harun W, Kamariah M, Muhamad N, Ghani S, Ahmad F, Mohamed Z. A review of powder additive manufacturing processes for metallic biomaterials. Powder Technol. 2018;327:128-51. https://doi.org/10.1016/j.powtec.2017.12.058
2. Casati R, Boari G, Rizzi A, Vedani M. Effect of annealing temperature on microstructure and high-temperature tensile behaviour of Ti-6242S alloy produced by Laser Powder Bed Fusion. Eur J of Mater. 2022;1(1):72-83. https://doi.org/10.1080/26889277.2021.1997341
3. Gong G, Ye J, Chi Y, Zhao Z, Wang Z, Xia G, et al. Research status of laser additive manufacturing for metal: a review. J Mater Res Technol. 2021;15:855-84. https://doi.org/10.1016/j.jmrt.2021.08.050
4. Boyer RR. An overview on the use of titanium in the aerospace industry. Mater Sci Eng A. 1996;213(1-2): 103-14. https://doi.org/10.1016/0921-5093(96)10233-1
5. Gogia A. High-temperature titanium alloys. Defence Science Journal. 2005;55(2):149-73.
6. Kaur M, Singh K. Review on titanium and titanium based alloys as biomaterials for orthopaedic applications. Mater Sci Eng C. 2019;102:844-62. https://doi.org/10.1016/j.msec.2019.04.064
7. Zhang L-C, Chen L-Y, Zhou S, Luo Z. Powder bed fusion manufacturing of beta-type titanium alloys for biomedical implant applications: A review. J Alloys Compd. 2023;936:168099. https://doi.org/10.1016/j.jallcom.2022.168099
8. Liu Y, Sing SL. A review of advances in additive manufacturing and the integration of high-performance polymers, alloys, and their composites. Mater Sci Addit Manuf. 2023;2(3):1587. https://doi.org/10.36922/msam.1587
9. Veiga C, Davim JP, Loureiro A. Properties and applications of titanium alloys: a brief review. Rev Adv Mater Sci. 2012;32(2):133-48.
10. Donachie M. Titanium: A Technical Guide. 2nd Edition ed: ASM International; 2000.
11. Al-Rubaie K, Melotti S, Rabelo A, Paiva J, Elbestawi M, Veldhuis S. Machinability of SLM-produced Ti6Al4V titanium alloy parts. J Manuf Process 2020; 57:768–786. https://doi.org/10.1016/j.jmapro.2020.07.035
12. Galati M, Defanti S, Saboori A, Rizza G, Tognoli E, Vincenzi N, et al. An investigation on the processing conditions of Ti-6Al-2Sn-4Zr-2Mo by electron beam powder bed fusion: Microstructure, defect distribution, mechanical properties and dimensional accuracy. Addit Manuf. 2022;50:102564. https://doi.org/10.1016/j.addma.2021.102564
13. Mosallanejad MH, Niroumand B, Aversa A, Saboori A. In-situ alloying in laser-based additive manufacturing processes: A critical review. J Alloys Compd. 2021;872:159567. https://doi.org/10.1016/j.jallcom.2021.159567
14. Liu Z, Qin Z-X, Liu F, Lu X, Wang H-M. The microstructure and mechanical behaviors of the Ti–6.5 Al–3.5 Mo–1.5 Zr–0.3 Si alloy produced by laser melting deposition. Mater Charact. 2014;97:132-9. https://doi.org/10.1016/j.matchar.2014.09.002
15. de Lima MSF, Sankaré S. Microstructure and mechanical behavior of laser additive manufactured AISI 316 stainless steel stringers. Mater Des. 2014;55:526-32. https://doi.org/10.1016/j.matdes.2013.10.016
16. Campagnoli MR, Galati M, Saboori A. On the processability of copper components via powder-based additive manufacturing processes: Potentials, challenges and feasible solutions. J Manuf Processes. 2021;72:320-37. https://doi.org/10.1016/j.jmapro.2021.10.038
17. Abdi A, Salehi MS, Fatemi SA, Iuliano L, Saboori A. Microstructure-induced anisotropic tribological properties of Sc-Zr modified Al–Mg alloy (Scalmalloy®) produced via laser powder bed fusion process. Int J Adv Manuf Technol. 2024;130(1):755-79. https://doi.org/10.1007/s00170-023-12691-5
18. Barros R, Silva FJ, Gouveia RM, Saboori A, Marchese G, Biamino S, et al. Laser powder bed fusion of Inconel 718: residual stress analysis before and after heat treatment. Met. 2019;9(12):1290. https://doi.org/10.3390/met9121290
19. Behjat A, Shamanian M, Sadeghi F, Iuliano L, Saboori A. Additive manufacturing of a novel in-situ alloyed AISI316L-Cu stainless steel: Microstructure and antibacterial properties. Mater Lett. 2024;355:135363. https://doi.org/10.1016/j.matlet.2023.135363
20. Emami Ghalehghasemi AH, Azadi A, Niroumand B, Galati M, Saboori A. Microstructure and Hardness of Ti-6242 Alloy Fabricated by Electron Beam Powder Bed Fusion and Laser Powder Bed Fusion Methods. J Adv Mater Eng (Esteghlal). 2025;44(2):1-17. (In Persian) https://doi.org/10.47176/jame.44.2.1090
21. Kaushik HC, Korayem MH, Hadadzadeh A. Developing a practice for the heat treatment of laser-powder bed fused Ti-6Al-2Sn-4Zr-2Mo-0.08 Si alloy. Vac. 2023;217:112554. https://doi.org/10.1016/j.vacuum.2023.112554
22. Kaushik HC, Korayem MH, Hadadzadeh A. Determination of α to β phase transformation kinetics in laser-powder bed fused Ti–6Al–2Sn–4Zr–2Mo-0.08 Si and Ti–6Al–4V alloys. Mater Sci Eng A 2022; 860:144294. https://doi.org/10.1016/j.msea.2022.144294
23. Kaushik HC, Korayem MH, Shaha SK, Kacher J, Hadadzadeh A. Achieving strength-ductility synergy in a laser-powder bed fused near-α titanium alloy through well-crafted heat treatments. J Alloys Compd. 2023;968:171913. https://doi.org/10.1016/j.jallcom.2023.171913
24. Fleißner-Rieger C, Pfeifer T, Jörg T, Kremmer T, Brabetz M, Clemens H, et al. Selective laser melting of a near‐α Ti6242S alloy for high‐performance automotive parts. Adv Eng Mater. 2021;23(12): 2001194. https://doi.org/10.1002/adem.202001194
25. Sui S, Chew Y, Hao Z, Weng F, Tan C, Du Z, et al. Effect of cyclic heat treatment on microstructure and mechanical properties of laser aided additive manufacturing Ti–6Al–2Sn–4Zr–2Mo alloy. Adv Powder Mater. 2022;1(1):100002. https://doi.org/10.1016/j.apmate.2021.09.002
26. Fan H, Yang S. Effects of direct aging on near-alpha Ti–6Al–2Sn–4Zr–2Mo (Ti-6242) titanium alloy fabricated by selective laser melting (SLM). Mater Sci Eng A 2020;788:139533. https://doi.org/10.1016/j.msea.2020.139533
27. Vafaei M, Ghanavati R, Saboori A, Iuliano L. The impact of heat treatment on microstructure, residual stress, and mechanical behavior of laser powder bed fusion additively manufactured Ti–6Al–2Sn–4Zr–2Mo alloy. J Mater Res Technol. 2024;33:5731-43. https://doi.org/10.1016/j.jmrt.2024.10.202
28. Gockel J, Fox J, Beuth J, Hafley R. Integrated melt pool and microstructure control for Ti–6Al–4V thin wall additive manufacturing. Mater Sci Technol. 2015;31(8):912-6. https://doi.org/10.1179/1743284714Y.0000000704
29. Bartolomeu F, Gasik M, Silva FS, Miranda G. Mechanical properties of Ti6Al4V fabricated by laser powder bed fusion: a review focused on the processing and microstructural parameters influence on the final properties. Met. 2022;12(6):986. https://doi.org/10.3390/met12060986
30. Carrozza A, Marchese G, Saboori A, Bassini E, Aversa A, Bondioli F, et al. Effect of Aging and Cooling Path on the Super β-Transus Heat-Treated Ti-6Al-4V Alloy Produced via Electron Beam Melting (EBM). Mater. 2022;15(12):4067. https://doi.org/10.3390/ma15124067
31. Emami Ghalehghasemi AH. Effect of Heat Treatment on Microstructure and Properties of Ti6242 alloy
Fabricated by Electron Beam Powder Bed Fusion (EB-PBF) Method [MSc thesis]. Isfahan: Isfahan University of Technology; 2024. (In Persian)
32. Mote VD, Purushotham Y, Dole B. Williamson-Hall analysis in estimation of lattice strain in nanometer-sized ZnO particles. J Theor Appl Phys. 2012;6:1-8. https://doi.org/10.1186/2251-7235-6-6
33. Lancaster RJ, Jeffs S, Haigh B, Barnard N. Derivation of material properties using small punch and shear punch test methods. Mater Des. 2022;215:110473. https://doi.org/10.1016/j.matdes.2022.110473
34. Liu S, Shin YC. Additive manufacturing of Ti6Al4V alloy: A review. Mater Des. 2019;164:107552. https://doi.org/10.1016/j.matdes.2018.107552
35. Liu Z, Wang Z, Gao C, Liu R, Xiao Z. Microstructure, anisotropic mechanical properties and very high cycle fatigue behavior of Ti6Al4V produced by selective electron beam melting. Met Mater Int. 2021;27:2550-61. https://doi.org/10.1007/s12540-020-00664-2
36. Ladani L, Sadeghilaridjani M. Review of powder bed fusion additive manufacturing for metals. Met. 2021; 11(9):1391. https://doi.org/10.3390/met11091391
37. Sing SL, An J, Yeong WY, Wiria FE. Laser and electron‐beam powder‐bed additive manufacturing of metallic implants: A review on processes, materials and designs. J Orthop Res. 2016;34(3):369-85. https://doi.org/10.1002/jor.23075
38. Sames WJ, List F, Pannala S, Dehoff RR, Babu SS. The metallurgy and processing science of metal additive manufacturing. Int Mater Rev. 2016;61(5): 315-60. https://doi.org/10.1080/09506608.2015.1116649
39. Al-Bermani S, Blackmore M, Zhang W, Todd I. The origin of microstructural diversity, texture, and mechanical properties in electron beam melted Ti-6Al-4V. Metall Mater Trans A. 2010;41:3422-34. https://doi.org/10.1007/s11661-010-0397-x
40. Callister Jr WD, Rethwisch DG. Materials science and engineering: an introduction: John wiley & sons; 2020.
41. Fleißner-Rieger C, Pfeifer T, Turk C, Clemens H. Optimization of the post-process heat treatment strategy for a near-α titanium base alloy produced by laser powder bed fusion. Mater. 2022;15(3):1032. https://doi.org/10.3390/ma15031032
42. Grujicic M, Dang P. Atomic-scale analysis of martensitic transformation in titanium alloyed with vanadium Part I: verification of the embedded-atom method model. Mater Sci Eng A. 1996;205(1-2):139-52. https://doi.org/10.1016/0921-5093(95)09894-1
43. Pegues J, Shao S, Shamsaei N, Sanaei N, Fatemi A, Warner D, et al. Fatigue of additive manufactured Ti-6Al-4V, Part I: The effects of powder feedstock, manufacturing, and post-process conditions on the resulting microstructure and defects. Int J Fatigue 2020;132:105358. https://doi.org/10.1016/j.ijfatigue.2019.105358
44. Vrancken B, Thijs L, Kruth J-P, Van Humbeeck J. Heat treatment of Ti6Al4V produced by Selective Laser Melting: Microstructure and mechanical properties. J Alloys Compd. 2012;541:177-85. https://doi.org/10.1016/j.jallcom.2012.07.022
45. de Formanoir C, Michotte S, Rigo O, Germain L, Godet S. Electron beam melted Ti–6Al–4V: Microstructure, texture and mechanical behavior of the as-built and heat-treated material. Mater Sci Eng A. 2016;652:105-19. https://doi.org/10.1016/j.msea.2015.11.052
46. Alaghmandfard R, Forooghi F, Seraj P, Keshavarzan M, Chalasani D, Fazeli F, et al. Heat treatment, microstructure, texture, and mechanical properties of electron beam melted Ti6Al4V. J Alloys Compd. 2024;1006:176265. https://doi.org/10.1016/j.jallcom.2024.176265
47. Zhu Z, Ng FL, Seet HL, Nai SML. Tailoring the microstructure and mechanical property of laser powder bed fusion fabricated Ti–6Al–2Sn–4Zr–2Mo via heat treatment. J Alloys Compd. 2022;895: 162648. https://doi.org/10.1016/j.jallcom.2021.162648
48. Zhu Z, Kumar P, Ng FL, Seet HL, Ramamurty U, Nai SML. Heat treatment effect on the microstructure and elevated temperature tensile property of the Ti6242S alloy fabricated via laser powder bed fusion. J Alloys Compd. 2022;925:166656. https://doi.org/10.1016/j.jallcom.2022.166656
49. Galarraga H, Warren RJ, Lados DA, Dehoff RR, Kirka MM, Nandwana P. Effects of heat treatments on microstructure and properties of Ti-6Al-4V ELI alloy fabricated by electron beam melting (EBM). Mater Sci Eng A. 2017;685:417-28. https://doi.org/10.1016/j.msea.2017.01.019
50. Fan H, Liu Y, Yang S. Martensite decomposition during post-heat treatments and the aging response of near-α Ti–6Al–2Sn–4Zr–2Mo (Ti-6242) titanium alloy processed by selective laser melting (SLM). J Micromech Mol Phys. 2021;6(02):2050018. https://doi.org/10.1142/S2424913020500186
51. Park CH, Won JW, Park J-W, Semiatin S, Lee CS. Mechanisms and kinetics of static spheroidization of hot-worked Ti-6Al-2Sn-4Zr-2Mo-0.1 Si with a lamellar microstructure. Metall Mater Trans A 2012;43:977-85. https://doi.org/10.1007/s11661-011-1019-y
52. Wang L, Lin H, Tsai C. Characterization and mechanism of α2-Ti3Al and γ-TiAl precipitation in Ti-6Al-4V alloy following tungsten arc welding. Key Eng Mater. 2012;520:320-9. https://doi.org/10.4028/www.scientific.net/KEM.520.320
53. Yue K, Liu J, Zhang H, Yu H, Song Y, Hu Q, et al. Precipitates and alloying elements distribution in near α titanium alloy Ti65. J Mater Sci Technol. 2020;36: 91-6. https://doi.org/10.1016/j.jmst.2019.03.018
54. Thijs L, Verhaeghe F, Craeghs T, Van Humbeeck J, Kruth J-P. A study of the microstructural evolution during selective laser melting of Ti–6Al–4V. Acta Mater. 2010;58(9):3303-12. https://doi.org/10.1016/j.actamat.2010.02.004
55. Radecka A, Coakley J, Vorontsov V, Martin T, Bagot P, Moody M, et al. Precipitation of the ordered α2 phase in a near-α titanium alloy. Scr Mater. 2016;117: 81-5. https://doi.org/10.1016/j.scriptamat.2016.02.015
56. Takeuchi A, Inoue A. Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element. Mater Trans. 2005;46(12):2817-29. https://doi.org/10.2320/matertrans.46.2817
57. Talebi M, Niroumand B, Razaghian A, Saboori A, Iuliano L. Process-induced microstructural variations in laser powder bed fusion of novel titanium alloys: A comprehensive study on volumetric energy density and alloying effects. J Mater Res Technol. 2024;31: 1430-42. https://doi.org/10.1016/j.jmrt.2024.06.167
58. Guduru R, Darling K, Kishore R, Scattergood R, Koch C, Murty K. Evaluation of mechanical properties using shear–punch testing. Mater Sci Eng A 2005; 395(1-2):307-14. https://doi.org/10.1016/j.msea.2004.12.048
59. Torres J, Gordon AP. Mechanics of the small punch test: a review and qualification of additive manufacturing materials. J Mater Sci. 2021;56:10707-44. https://doi.org/10.1007/s10853-021-05929-8
60. Welsch G, Boyer R, Collings E. Materials properties handbook: titanium alloys: ASM international; 1993.
61. Raghavan S, Nai MLS, Wang P, Sin WJ, Li T, Wei J. Heat treatment of electron beam melted (EBM) Ti-6Al-4V: microstructure to mechanical property correlations. Rapid Prototyping J. 2018;24(4):774-83. https://doi.org/10.1108/RPJ-05-2016-0070
62. Ji Z, Shen C, Wei F, Li H. Dependence of macro-and micro-properties on α plates in Ti-6Al-2Zr-1Mo-1V alloy with tri-modal microstructure. Met. 2018;8(5):299. https://doi.org/10.3390/met8050299
63. Hosseini R, Morakabati M, Abbasi SM, Hajari A. Development of a trimodal microstructure with superior combined strength, ductility and creep-rupture properties in a near alpha titanium alloy. Mater Sci Eng A 2017;696:155-65. https://doi.org/10.1016/j.msea.2017.04.068
64. Galarraga H, Lados DA, Dehoff RR, Kirka MM, Nandwana P. Effects of the microstructure and porosity on properties of Ti-6Al-4V ELI alloy fabricated by electron beam melting (EBM). Addit Manuf. 2016;10:47-57. https://doi.org/10.1016/j.addma.2016.02.003
65. Lopez M, Pickett C, Arrieta E, Murr LE, Wicker RB, Ahlfors M, et al. Effects of postprocess hot isostatic pressing treatments on the mechanical performance of EBM fabricated TI-6Al-2Sn-4Zr-2Mo. Mater. 2020; 13(11):2604. https://doi.org/10.3390/ma15051978
66. Jaber H, Kónya J, Kulcsár K, Kovács T. Effects of annealing and solution treatments on the microstructure and mechanical properties of Ti6Al4V manufactured by selective laser melting. Mater. 2022; 15(5):1978. https://doi.org/10.3390/ma15051978
