Effect of Al2O3 Particles on Mechanical Properties of Al-(0-40%)Al2O3 Composite Foams Produced by Low Energy Mechanical Alloying

1. Wang, Z., Ning, L.J., and Zhao, L., “Effect of Heat
Treatments on the Crushing Behavior and Absorbing
Performance of Aluminum Alloys Foams”, Materials
and Design, Vol. 30, pp. 977-982, 2009. 2. Campana, F., and Pilone, D., “Effect of Heat
Treatments on the Mechanical Behaviour of
Aluminum Alloy Foams”, Scripta Materialia, Vol. 60, pp. 679-682, 2009. 3. Kolluri, M., Kartheyan, S., and Ramamurty, U.,
“Effect of Lateral Constraint on the Mechanical
Properties of a Closed-Cell Al Foam: 1. Experiments”, Metallurgical and Materials
Transactions, Vol. A 38, pp. 2006-2013, 2007. 4. Greene, S.A., Hall, I.W., and Guden, M., “Improving
the Energy Absorption of Closed Cell Aluminum
Foams”, Journal of Materials Science Letters, Vol. 21, pp. 1591-1593, 2002. 5. Guden, M., and Yuksel, S., “SiC-Particulate
Aluminum Composite Foams Produced from Powder
Compacts: Foaming and Compression Behavior”, Journal of Materials Sience, Vol. 41, pp. 4075-4084, 2006. 6. Yu, S., Luo, Y., and Liu, J., “Effects of Strain Rate
and SiC Particle on the Compressive Property of
SiCp/AlSi9Mg Composite Foams”, Materials
Science and Engineering, Vol. A 487, pp. 394-399, 2008. 7. Zhao, N.Q., Jiang, B., Du, X.W., Li, J.J., and Shi,
C.S., “Effect of Y2O3 on the Mechanical Properties
of Open Cell Aluminum Foams”, Materials Letters, Vol. 60, pp. 1665-1668, 2006. 8. Prabhu, B., Suryanarayana, C., Ana, L., and
Vaidyanathan., “Synthesis and Characterization of
High Volume Fraction Al–Al2O3 Nanocomposite
Powders by High-Energy Milling”, Materials
Science and Engineering, Vol. A 425, pp. 192-200, 2006. 9. Razavi Hesabi, Z., Simchi, A., and Seyed Reihani, S.M., “Structrural Evolution During Mechanical
Milling of Nanometric and Micrometric Al2O3 Reinforced Al Matrix Composites,” Materials
Science and Engineering, Vol. A 428, pp. 159-168, 2006. 10. Alizadeh, M., and Mirzaei Aliabadi, M., “Synthesis
Behavior of Nanocrystalline Al-Al2O3 Composite
During Low Time Mechanical Milling Process”,
Journal of Alloys and Compounds, Vol. 509, pp. 4978-4986, 2011. 11. Benajmin, J.S., and Volin, T.E., “The Mechanism of
Mechanical Alloying”, Metallurgical Transactions, Vol. 5, pp. 1929-1934, 1974. 12. Ozan, S., and Bilhan, S., “Effect of Fabrication
Parameters on the Pore Concentration of the
Aluminum Metal Foam Manufactured by Powder
Metallurgy Process,” International Journal of
Advanced Manufactured Technology, Vol. 39, pp. 257-260, 2008. 13. Wang, Q.Z., Cui, C.X., Liu, S.J., and Zhao, L.C., “Open-Celled Porous Cu Prepared by Replication of
NaCl Space-Holders”, Materials Science and
Engineering, Vol. A 527, pp. 1275-1278, 2010. 14. Surace, R., De Filippis, L.A.C., Ludocico, A.D., and
Boghetich, G., “Influence of Processing Parameters
on Aluminum Foam Produced by Space Holder
Technique”, Materials and Design, pp. 1878-1885, 2009. 15. Wenjuan, N., Chenguang, B., Guibao, Q., and Qiang, W., “Processing and Properties of Porous Titanium
Using Space Holder Technique”, Materials Science
and Engineering, Vol. A 506, pp. 148-151, 2009. 16. Jiang, B., Zhao, N.Q., Shi, C.S., and Li, J.J., “Processing of Open Cell Aluminum Foams with
Tailored Porous Morphology,” Scripta Materialia, Vol. 53, pp. 781-785, 2005. 17. Bin, J., Zejum W., and Naiqin, Z., “Effect of Pore
Size and Relative Density on the Mechanical
Properties of Open Cell Aluminum Foams,” Scripta
Materialia, Vol. 56, pp. 169-172, 2007. 18. Jiang, B., Zhao, N. Q., Shi, C.S., Li, J.J., and Man, H.C., “A Novel Method for Making Open Cell
Aluminum Foams by Powder Sintering Process”, Materials Letters, Vol. 59, pp. 3333-3336, 2005. 19. Li, D.S., Zhang, Y.P., Eggeler, G., And Zhang, X.P.,
“High Porosity and High-Strength Porous NiTi
Shape Memory Alloys with Controllable Pore
Characteristics”, Journal of Alloys and Compounds, Vol. 470, pp. L1-L5, 2009. 20. Alizadeh, M., and Mirzaei Aliabadi, M., “Compressive Properties and Energy Absorption
Behavior of Al–Al2O3 Composite Foam Synthesized
by Space-Holder Technique”, Materials and Design, Vol. 35, pp. 419-424, 2012. 21. Eskandari, H., Ghasemi, H.M., and Emamy, M.,
“Microstructure and Interface Studies of Al/SiCp
Composites Produced by Dynamic Compaction”, Materials Science Forum, Vol. 465-466, pp. 213- 218, 2004. 22. Bond, G.M., and Inal, O.T., “Shock-Compacted
Aluminum/Boron Carbide Composites”, Composites
Engineering, Vol. 5, pp. 9-16, 1995. 23. Kim, K.T., Choi, S.W., and Park, H., “Densification
Behavior of Ceramic Powder Under Cold
Compaction”, Transactions of the ASME, Vol. 122, pp. 238-244, 2000.