Effect of Discontinuous Ultrasonic Treatment on Mechanical Properties and Microstructure of Cast Al413-SiCnp Nanocomposites

1. Suresh, S., Mortensen, A. and Needleman, A.,
Fundamentals of Metal Matrix Composites,
Butterworth-Heinemann, 1993. 2. Arsenault, R.J., Wang, L. and Feng, C.R., "Srenghthening of Composites due to
Microstructural Changes in the Matrix", Acta
Metallurgica et Materialia, Vol. 39, pp. 47-57, 1991. 3. Kainer, K.U., Basics of Metal Matrix Composites,
Wiley-VCH Verlag Gmbh, 2006. 4. Ibrahim, I.A., Mohamed, F.A. and Lavernia, E.J.,
"Particulate Reinforced Metal Matrix Composites- A
Review", Journal of Materials Science, Vol. 26, pp. 1137-1156, 1991. 5. Lee, J.C. and Ahn, J.P., "Control of the Interface in
SiC/Al Composites", Scripta Materialia, Vol. 41, pp. 895–900, 1999. 6. Yibin, X. and Yoshita, T., "Thermal Conductivity of
SiC Fine Particles Reinforced Al Alloy Matrix
Composite with Dispersed Particle Size", Journal of
Applied Physics, Vol. 95, pp. 722-726, 2004. 7. Borgonovo, C. and Apelian, D., "Manufacture of
Aluminum Nanocomposites: A Critical Review" ,
Materials Science Forum, Vol. 678, pp. 1-22, 2011. 8. Yang, Y., Lan, J. and Li. X., "Study on Bulk
Aluminum Matrix Nano-Composite Fabricated by
Ultrasonic Dispersion of Nano-Sized SiC Particles
in Molten Aluminum Alloy", Materials Science and
Engineering A, Vol. 380, pp. 378-383, 2004. 9. Li, X. and Yang, Y., "Theoretical and Experimental
Study on Ultrasonic Dispersion of Nanoparticles for
Strengthening Cast Aluminum Alloy A356", Metallrgical Science and Technology, Vol. 26, pp. 12-20, 2008. 10.Chawla, N. and Chawla, K. K., Metal Matrix
Composites, Springer Science, 2006. 11. Li, X., Yang, Y. and Chen, X., "Ultrasonic-Assisted
Fabrication of Metal Matrix Nanocomposites",
Journal of Materials Science, Vol. 39, pp. 3211- 3212, 2004. 12. Hashim, J., Looney., L. and Hashmi, M.S.J., “Metal
Matrix Composite: Production by the Stir Casting
Method", Journal of Material Processing
Technology, Vol. 92-93, pp. 1-7, 1999. 13. Yu, H., Processing Routes for Aluminum Based
Nano-Composites, M.Sc. Thesis, WorcesterPolytechnic Institute, 2010. 14. Donthamsetty, S., Damera, N.R. and Jain, P.K., "Ultrasonic Cavitation Assisted Fabrication and
Characterization of A356 Metal Matrix
Nanocomposite Reiforced With SiC, B4C, CNTs",
Asian International Journal of Science and
Technology in Production and Manufacturing
Engineering (AIJSTPME), Vol. 2(2), pp. 27-34, 2009. 15. Martínez, L.C., Ultrasound in Chemistry: Analytical
Applications, Wiley-VCH, 2009. 16. Wenzhen, L., Shiying, L., Qiongyuan, Z. and Xue,
Z., "Ultrasonic-Assisted Fabrication of SiC
Nanoparticles Reinforced Aluminum Matrix
Composites", Materials Science Forum, Vol. 654- 656, pp. 990-993, 2010. 17. Hui, W.Z., Dong, W.X., Xin, Z.Y. and Bo, D.W.,
"SiC Nanoparticles Reinforced Magnesium Matrix
Composites Fabricated by Ultrasonic Method",
Transactions of Nonferrous Metals Society of
China, Vol. 20, pp. s1029-s1032, 2010. 18. Li, X., Duan, Z., Cao, G. and Roure, A., "Ultrasonic
Cavitation Based Solidification Processing of Bulk
Mg Nanocomposites", AFS Transactions, pp. 57-68, 2008. 19. ASM Metals Handbook, 10th. Ed. Vol. 2: Properties
& Selection: Nonferrous, Alloys & Pure Metals,
2000. 20. Matthews, F.L. and Rawlings, R.D., Composite
Materials Engineering & Science, Cambridge
University Press, 1994. 21.Composite Materials Handbook, Vol. 4, Metal
Matrix Composites, Department of Defense, USA,
US Army Research Laboratory, 2002. 22. Hashim, J., Looney, L. and Hashmi, M.S.J., "The
Wettability of SiC by Molten Aluminum alloy",
Journal of Material Processing Technology, Vol. 119, pp. 324-328, 2001. 23. Arsenault, R.J. and Shi, N., "Dislocation Generation
due to Differences Between The Coefficients of
Thermal Expansion", Materials Science and
Engineering, Vol. 81, pp. 175-187, 1986. 24. Smith, C.A. and Pandey, A.B., Composite Materials,
Metals Hanbook, Vol. 21, American Society for
Metals, 2006. 25. Taya, M., "Strengthening Mechanisms of Metal
Matrix Copmposites, Overview", Materials
Transactions JIM, Vol. 32, pp. 1-19, 1991. 26. Zhang, Z. and Chen, D. L., "Contribution of Orowan
Strengthening Effect in Particulate-Reinforced Metal
Matrix Nanocomposites", Materials Science and
Engineering A, Vol. 483-484, pp. 148-152, 2008. 27. Laurent, V., Chatain, D. and Eustathopoulos, N.,
"Wettability of SiO2 and Oxidized SiC by
Aluminum", Materials Science and Engineering A, Vol. 135, pp. 89–94, 1991. 28. Wang, W. and Ajersch, F., "Si Phase Nucleation on
SiC Particulate Reinforcement in Hypereutectic
Al-Si Alloy Matrix", Materials Science and
Engineering A, Vol. 187, pp. 65–75, 1994. 29. Li, H.T., Wang, Y. and Fan, Z., "Mechanisms of
Enhanced Heterogeneous Nucleation During
Solidification in Binary Al–Mg Alloys", Acta
Materialia, Vol. 60, pp. 1528–1537, 2012. 30.Jun-Wen, L., Momono, T., Ying, F. and Zheng., J.,
"Effect of Ultrasonic Stirring on Temperature
Distribution and Grain Refinement in Al- 1.65%Si
Alloy Melt", Transactions of Nonferrous Metals
Society of China, Vol. 17, pp. 691-697, 2007. 31. Khosro Aghayani, M. and Niroumand, B., "Effects
of Ultrasonic Treatment on Microstructure and
Tensile Strength of AZ91 Magnesium Alloy", Journal of Alloys and Compounds, Vol. 509, pp. 114–122, 2011. 32. Eskin, G.I., Makarov, G.S. and Pimenov, Y.P.,
"Effect of Ultrasonic Processing of Molten Metal on
Structure Formation and Improvement of Properties
of High-Strength Al-Za-Mg-Cu-Zr Alloys",
Advanced Performance Materials, Vol. 2, pp. 43-50, 1995. 33. Tsunekawa, Y., Taga, K., Fukui, Y. and Okumiya,
M.,"Appearance of Non-Equilibrium α-Aluminum
Grains in Hypereutectic Al-Si Alloy through
Sono-Solidification", Materials Science Forum, Vol. 638- 642, pp. 362-367, 2010. 34. Williams, D.B., Carter, C. B., Transmission Electron
Microscopy, A Textbook for Materials Science,
Springer, pp. 265-287, 1996. 35. Dieter, G., Mechanical Metallurgy, McGraw-Hill
Science, 1986. 36. Xu, H., Meek, T.T. and Han, Q., "Effects of
Ultrasonic Field and Vacuum on Degassing of
Molten Aluminum Alloy", Materials Letters, Vol. 61, pp. 1246-1250, 2007. 37. Alba-Baena, N. and Eskin, D., "Kinetics of
Ultrasonic Degassing of Aluminum Alloys", Light
Metals, pp. 957-962, 2013. 38. Alba-Baena, N., Pabel, T., Villa-Sierra, N. and Eskin,
D., "Effect of Ultrasonic Melt Treatment on
Degassing and Structure of Aluminium Alloys",
Materials Science Forum, Vol. 765, pp. 271-275, 2013. 39. Mortensen, A. and Llorca, J., "Metal Matrix
Composites", Annual Review of Materials Research, Vol. 40, pp. 243-270, 2010. 40. Grandfield, J.F. and Eskin, D.G., Essential Readings
in Light Metals: Cast Shop for Aluminum
Production, Vol. 3, 2013.