Simulation of Elastic Properties of Polymer- Clay Nanocomposite

Beall, G.W., and Powell, C.E., Fundamentals of Polymer-Clay Nanocomposites, Cambridge University Press, Cambridge, 2001.
2. Zhang, Z. and Chen, D.L., “Consideration of Orowan Strengthening Effect in Particulate-Reinforced Metal Matrix Nanocomposites: a Model for Predicting Their Yield Strength”, Scripta Materialia, Vol. 54, pp. 1321-1326, 2006.
3. Ajayan, P.M., Schadler, L.S. and Braun, P.V., Nanocomposite Science and Technology, Wiley-VCH Verlag GmbH, Weinheim, Germany, 2003.
4. Camargo, P.H.C., Satyanarayana, K.G. and Wypych, F., “Nanocomposites: Synthesis, Structure, Properties and New Application Opportunities”, Materials Research, Vol. 12, pp. 1-39, 2009.
5. Maksimov, R.D., Gaidukov, S., Zicans, J. and Jansons, J., \"Moisture Permeability Polymer Nanocomposite Containing Unmodified Clay\", Mechanics of Composite Materials, Vol. 44, pp. 505-514, 2008.
6. Kojima, Y., Fukumori, K., Usuki, A., Okada, A. and Kurauchi, T., “Gas Permeabilities in Rubber-Clay Hybrid\", Journal of Materials Science Letters,
Vol. 12, pp. 889-890, 1993.
7. Russo, G.M., Nicolais, V., Di Maio, Montesano, L., S. and Incarnato, L., \"Rheological and Mechanical Properties of Nylon 6 Nanocomposites Submitted to Reprocessing with Single and Twin Screw Extruders\", Polymer Degradation and Stability,
Vol. 92, pp. 1925-1933, 2007.
8. Pesetskii, S.S., Bogdanovich, S.P. and Myshkin, N.K., \"Tribological Behavior of Nanocomposites Produced by the Dispersion of Nanofillers in Polymer Melts\", Journal of Friction and Wear,
Vol. 28, pp. 457-475, 2007.
9. Wang, J., Du, J., Zhu, J. and Wilkie, C A., \"An XPS Study of the Thermal Degradation and Flame Retardant Mechanism of Polystyrene-Clay Nanocomposites,\" Polymer Degradation and Stability, Vol. 77, pp. 249-252, 2002.
10. Hackman, I. and Hollaway, L., “Epoxy-Layered Silicate Nanocomposites in Civil Engineering”, Composites Part A: Applied Science and Manufacturing, Vol. 37, pp. 1161-1170, 2006.
11. Srinath, G. and Gnanamoorthy, R., “Effect of Nanoclay Reinforcement on Tensile and Tribo Behaviour of Nylon 6”, Journal of Materials Science, Vol. 40, pp. 2897-2901, 2005.
12. Ray, S.S., Clay-Containing Polymer Nanocomposites from Fundamentals to Real Applications, Elsevier, Oxford, 2013.
13. Gao, F., “Clay/Polymer Composites: the Story”, Materials Today, Vol. 7, pp. 50–55, 2004.
14. Ray, S.S. and Okamoto, M., “Polymer/Layered Silicate Nanocomposites: a Review from Preparation to Processing”, Progress in Polymer Science,
Vol. 28, pp. 1539–1641, 2003.
15. Utracki, L.A., Clay-Containing Polymeric Nanocomposites, Vol. 1-2, Rapra Technology Limited, UK, 2004.
16. Zeng, Q.H., Yu, A.B. and Lu, G.Q., “Multiscale Modeling and Simulation of Polymer Nanocomposites”, Progress in Polymer Science,
Vol. 33, pp. 191–269, 2008.
17. Sheng, N., Boyce, M.C., Parks, D.M., Rutledge, G.C., Abes, J.I. and Cohen, R.E., “Multiscale Micromechanical Modeling of Polymer/Clay Nanocomposites and the Effective Clay Particle”, Polymer, Vol. 45, pp. 487–506, 2004.
18. Brune, D. and Bicerano, A.J., “Micromechanics of Nanocomposites: Comparison of Tensile and Compressive Elastic Moduli, and Prediction of Effects of Incomplete Exfoliation and Imperfect Alignment on Modulus”, Polymer, Vol. 43, pp. 369–38, 2002.
19. Yung, K.C., Wang, J. and Yue, T.M., “Modeling Young\'s Modulus of Polymer-Layered Silicate Nanocomposites Using a Modified Halpin-Tsai Micromechanical Model”, Journal of Reinforced Plastics and Composites, Vol. 25, pp. 847-861, 2006.
20. Mortazavi, B., Baniassadi, M., Bardon, J. and Ahzi, S., “Modeling of Two-Phase Random Composite Materials by Finite Element, Mori–Tanaka and Strong Contrast Methods”, Composites: Part B,
Vol. 45, pp. 1117–1125, 2013.
21. Anoukou, K., Zaïri, F., Naït-Abdelaziz, M., Zaoui, A., Messager, T. and Gloaguen,s J.M., “On the Overall Elastic Moduli of Polymer-Clay Nanocomposite Materials Using a Self-Consistent Approach. Part I Theory”, Composites Science and Technology, Vol. 71, pp. 197–205, 2011.
22. Pisano, C., Priolo, P. and Figiel, L., “Prediction of Strength in Intercalated Epoxy–Clay Nanocomposites via Finite Element Modelling”, Computational Materials Science, Vol. 55, pp. 10–16, 2012.
23. Pahlavanpour, M., Moussaddy, H., Ghossein, E., Hubert, P. and Lévesque, M., “Prediction of Elastic Properties in Polymer–Clay Nanocomposites Analytical Homogenization Methods and 3D Finite Element Modeling”, Computational Materials Science, Vol. 79, pp. 206–215, 2013.
24. Pahlavanpour, M., Hubert, P. and Lévesque, M., “Numerical and Analytical Modeling of the Stiffness of Polymer–Clay Nanocomposites with Aligned Particles One- and Two-Step Methods”, Computational Materials Science, Vol. 82, pp. 122–130, 2014.
25. Zare-Shahabadi, A., Shokuhfar, A., Ebrahimi-Nejad, S., Arjmand, M. and Termeh, M., “Modeling the Stiffness of Polymer Layered Silicate Nanocomposites- More Accurate Predictions with Consideration of Exfoliation Ratio as a Function of Filler Content”, Polymer Testing, Vol. 30, pp. 408–414, 2011.
26. Qu, J. and Cherkaoui, M., Fundamentals of Micromechanics of Solids, John Wiley, New Jersey, 2006.
27. Tucker, C.L. and Liang, E., “Stiffness Predictions for Unidirectional Short-Fiber Composites: Review and Evaluation”, Composites Science and Technology, Vol. 59, pp. 655-671, 1999.
28. Luo, J.J. and Daniel, I.M., \"Characterization and Modeling of Mechanical Behavior of Polymer/Clay Nanocomposites\", Composites Science and Technology, Vol. 63, pp. 1607-1616, 2003.
29. Tandon, G.P. and Weng, G.J., “The Effect of Aspect Ratio of Inclusions on the Elastic Properties of Unidirectionally Aligned Composites”, Polymer Composites, Vol. 5, pp. 327-333, 1984.
30. Tandon, G.P. and Weng, G.J., “Average Stress in the Matrix and Effective Moduli of Randomly Oriented Composites”, Composites Science and Technology, Vol. 27, pp. 111-132, 1986.
31. Lai, W.M., Rubin, D. and Krempl, E., Introduction to Continuum Mechanics, Elsevier, Oxford, UK, 2010.
33. Hbaieb, K., Wang, Q.X., Chia, Y.H.J. and Cotterell, B., \"Modelling Stiffness of Polymer/Clay Nanocomposites\", Polymer, Vol. 48, pp. 901-909, 2007.
34. Pisano, C. and Figiel, L., “Modelling of Morphology Evolution and Macroscopic Behaviour of Intercalated PET–Clay Nanocomposites during Semi-Solid State Processing”, Composites Science and Technology, Vol. 75, pp. 35–41, 2013.
35. Sheng, N., \"Micro/Nanoscale Modeling of Anisotropic Mechanical Properties of Polymer/Layered-Silicate Nanocomposites\", M.Sc. Thesis, Massachusetts Institute of Technology, Cambridge, 2002.
36. Shia, D., Hui, C.Y., Burnside, S.D. and Giannelis, E.P., “An Interface Model for the Prediction of Young’s Modulus of Layered Silicate-Elastomer Nanocomposites”, Polymer Composites, Vol. 19, pp. 608-617, 1998.
37. Jones, R.M., Mechanics of Camposite Materials, Taylor and Francis, London, UK, 1999.
38. Alexandre, M. and Dubois, P., “Polymer-Layered Silicate Nanocomposites: Preparation, Properties and Uses of a New Class of Materials”, Materials Science and Engineering R, Vol. 28, pp. 1-63, 2000.
39. Bharadwaj, R.K., Mehrabi, A.R., Hamilton, C., Trujillo, C., Murga, M., Fan, R., Chavira, A. and Thompson, A.K., “Structure–Property Relationships in Cross-Linked Polyester–Clay Nanocomposites”, Polymer, Vol. 43, pp. 3699–705, 2002.
40. Beall, G.W. and Powell, C.E., Fundamentals of Polymer-Clay Nanocomposites, Cambridge University Press, Cambridge. UK, 2011.
41. Chen, B. and Evans, J.R.G., “Elastic Moduli of Clay Platelets”, Scripta Materialia, Vol. 54, pp. 1581-1585, 2006.
42. Suter, J.L., Coveney, P.V., Greenwell, H.C. and Thyveetil, M.A., “Large-Scale Molecular Dynamics Study of Montmorillonite Clay: Emergence of Undulatory Fluctuations and Determination of Material Properties”, The Journal of Physical Chemistry C, Vol. 111, pp. 8248-8259, 2007.
43. Yasmin, A., Luo, J.J., Abot, J.L. And Daniel, I.M., “Mechanical and Thermal Behavior of Clay/Epoxy Nanocomposites”, Composites Science and Technology, Vol. 66, pp. 2415–2422, 2006.
44. Fertig, R.S. and Garnich, M.R., “Influence of Constituent Properties and Microstructural Parameters on the Tensile Modulus of a Polymer/Clay Nanocomposite”, Composites Science and Technology, Vol. 64, pp. 2577–2588, 2004.
45. Chen, Y., Chia, J.Y.H., Su, Z.C., Tay, T.E. and Tan, V.B.C., “Mechanical Characterization of Interfaces in Epoxy-Clay Nanocomposites by Molecular Simulations”, Polymer, Vol. 54, pp. 766-773, 2013.
46. Zhu, L. and Narh, K.A., “Numerical Simulation of the Tensile Modulus of Nanoclay-Filled Polymer Composites”, Journal of Polymer Science: Part B: Polymer Physics, Vol. 42, pp. 2391–2406, 2004.
47. Sevostianov, I. and Kachanov, M., “Effect of Interphase Layers on the Overall Elastic and Conductive Properties of Matrix Composites. Applications to Nanosize Inclusion”, International Journal of Solids and Structures, Vol. 44, pp. 1304–1315, 2007.
48. Masud, M.A.A. and Masud, A.K.M., “Effect of Interphase Characteristic and Property on Axial Modulus of Carbon Nanotube Based Composites”, Journal of Mechanical Engineering, Vol. 41, pp. 15-24, 2010.